Acoustical Surfaces, Inc. -Fabrisorb™ Decorative Fabric Wrapped Acoustic Panels

DOWNLOADS

Fabrisorb™ decorative fabric-wrapped acoustic panels provide high-performance noise and reverberation reduction. From movie theaters to home music production studios, Fabrisorb wall panels help you create a space that is both visually and acoustically pleasing.


Category: absorbers | acoustic paneling | fire-resistant acoustic insulation...

MasterFormat: Rigid-Sheet Vinyl Wall Coverings | Fabric-Wrapped Panels | Interior Wall Paneling...



Acoustical Surfaces, Inc.
123 Columbia Court North Suite 201
Chaska, MN 55318
Tel: (800) 470-6652
Fax: (952) 448-2613

sales@acousticalsurfaces.com

https://www.acousticalsurfaces.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Fabrisorb™ Decorative Fabric Wrapped Acoustic Panels

Fabrisorb™ decorative fabric-wrapped acoustic panels provide high-performance noise and reverberation reduction. From movie theaters to home music production studios, Fabrisorb wall panels help you create a space that is both visually and acoustically pleasing.

Product Specs

Material:

6 lb. pcf glass fiber with woven fabric and micro-perforated vinyl facings.

Applications:

These decorative sound absorbing panels are great for offices, schools, meeting rooms, music rooms, hotels, auditoriums, recording studios, broadcasting studios. These acoustic wall panels are perfect for any space where good speech privacy or speech intelligibility is important.

Sizes:

Up to 4’ x 10’

Thickness:

1″, 1-1/8″, 2″, 2-1/8″

Edge Detail:

Square, Radius, Bevel, Half-Bevel

Colors:

Acoustical fabric and micro-perforated vinyl facings available in a wide range of standard and custom colors. For a full list of acoustical fabric options, visit our website.

Flammability:

Class A Fire Rated per ASTM E84

Installation:

Adhesive, Hook & Loop Fasteners, Mechanical Clips, Impaling Clips, magnetic clips


See More


Specifications

Fabrisorb™ Wall panel - Sound Absorption Coefficients
6-7 PCF Glass Fiber125Hz250Hz500Hz1KHz2KHz4KHzNRC
1″.14.27.801.111.141.14.85
2″.22.811.241.301.211.161.15
Edge Details - Impaling Clips and Adhesive
One impaling clip is needed for each mounting locationImpaling clips are installed onto the wall to support the weight of the panels until a construction adhesive dries.One impaling clip is needed for each mounting locationImpaling clips are installed onto the wall to support the weight of the panels until a construction adhesive dries.One impaling clip is needed for each mounting locationImpaling clips are installed onto the wall to support the weight of the panels until a construction adhesive dries.
Install LocationWall
Parts Included(1) × Impaling Clip
Recommended Adhesive
(sold separately)
Titebond Green Choice Adhesive (ASTSA28)
Part NumberHWIMP33
Edge Details - Fabric Wrapped Panel Hardware Pack - Impaling Clip
One hardware pack is needed for each mounting locationDrywall anchors are installed into the drywall and the screws hold the impaling clip to the anchor. Impaling clips are installed onto the wall to support the weight of the panels until a construction adhesive dries.One hardware pack is needed for each mounting locationDrywall anchors are installed into the drywall and the screws hold the impaling clip to the anchor. Impaling clips are installed onto the wall to support the weight of the panels until a construction adhesive dries.One hardware pack is needed for each mounting locationDrywall anchors are installed into the drywall and the screws hold the impaling clip to the anchor. Impaling clips are installed onto the wall to support the weight of the panels until a construction adhesive dries.
Install LocationWall
Parts Included(1) × Impaling Clip
(2) × Drywall Anchors
(2) × ¾″ Screws
Recommended Adhesive
(sold separately)
Titebond Green Choice Adhesive (ASTSA28)
Part NumberHWFWPIMP
Edge Details - Fabric Wrapped Panel Hardware Pack 1
One hardware pack is needed for each mounting locationThe drywall anchors are installed onto the drywall and the screws hold one of the plastic clips to the wall. The remaining ¾″ screws are used to mount the remaining plastic clip to the mounting plate on the back of the panel. Adhesive can be used to hold the clips together to prevent the clips from detaching from one another.One hardware pack is needed for each mounting locationThe drywall anchors are installed onto the drywall and the screws hold one of the plastic clips to the wall. The remaining ¾″ screws are used to mount the remaining plastic clip to the mounting plate on the back of the panel. Adhesive can be used to hold the clips together to prevent the clips from detaching from one another.One hardware pack is needed for each mounting locationThe drywall anchors are installed onto the drywall and the screws hold one of the plastic clips to the wall. The remaining ¾″ screws are used to mount the remaining plastic clip to the mounting plate on the back of the panel. Adhesive can be used to hold the clips together to prevent the clips from detaching from one another.
Install LocationWall or Ceiling
Parts Included(1) × Mounting Plate (factory-installed on the back of the panel)
(2) × 3″ Plastic Z-bars
(2) × Drywall Anchors
(4) × ¾″ Screws
Part NumberHWFWPHP1
NotePlastic clips are also available in 21″, 47″, and 96″ lengths.
Edge Details - Fabric Wrapped Panel Rotofast Standard Anchor Kit
One hardware pack is needed for each mounting location. The Rotofast Standard Anchor is screwed to the wall. Mark anchor locations on panel. Push metal insert into anchor body. Position panel at pre-marked locations and push hex tool through panel face to engage anchor. Turn clockwise approximately two revolutions. Pull the driver out.For panels with tightly-woven fabric, leather, vinyl, or other specialty covering, the Rotofast Snap-On Anchor is recommended.One hardware pack is needed for each mounting location. The Rotofast Standard Anchor is screwed to the wall. Mark anchor locations on panel. Push metal insert into anchor body. Position panel at pre-marked locations and push hex tool through panel face to engage anchor. Turn clockwise approximately two revolutions. Pull the driver out.For panels with tightly-woven fabric, leather, vinyl, or other specialty covering, the Rotofast Snap-On Anchor is recommended.One hardware pack is needed for each mounting location. The Rotofast Standard Anchor is screwed to the wall. Mark anchor locations on panel. Push metal insert into anchor body. Position panel at pre-marked locations and push hex tool through panel face to engage anchor. Turn clockwise approximately two revolutions. Pull the driver out.For panels with tightly-woven fabric, leather, vinyl, or other specialty covering, the Rotofast Snap-On Anchor is recommended.
Install LocationWall
Parts Included(1) × Rotofast standard anchor
(1) × Wall anchor
(1) × 2″ #8 Screw
(1) Rotofast standard hex tool
(1) Rotofast standard driver tool
NoteMultiple kits ordered together will only include (1) Rotofast standard hex tool and (1) Rotofast standard driver tool.
Edge Details - Fabric Wrapped Panel Rotofast Snap-On Anchor Kit
One hardware pack is needed for each mounting location. The Rotofast Snap-On Anchor is screwed into the back of the panel. The marking plug is inserted into the anchor, then panel is pushed against wall to mark anchor locations. The ratchet is screwed into the wall at marked locations. Firmly push panels onto ratchets to complete installation.One hardware pack is needed for each mounting location. The Rotofast Snap-On Anchor is screwed into the back of the panel. The marking plug is inserted into the anchor, then panel is pushed against wall to mark anchor locations. The ratchet is screwed into the wall at marked locations. Firmly push panels onto ratchets to complete installation.One hardware pack is needed for each mounting location. The Rotofast Snap-On Anchor is screwed into the back of the panel. The marking plug is inserted into the anchor, then panel is pushed against wall to mark anchor locations. The ratchet is screwed into the wall at marked locations. Firmly push panels onto ratchets to complete installation.
Install LocationWall or Ceiling
Parts Included(1) × Rotofast snap-on anchor with ratchet
(1) × Marking plug
(1) × Wall anchor
(1) × 2″ #8 Screw
(1) Rotofast Snap-On Hex Tool
NoteMultiple kits ordered together will only include (1) Rotofast Snap-On Hex Tool and upto (6) Marking plugs.