DoorKing, Inc. -6003 Residential Swing Gate Actuator

DOWNLOADS

DKS 6003 Swing Gate Actuators offer convenience and reliability in a compact, aesthetic design. These Actuators mount directly to your gate and pilaster, which simplifies installation without the need for concrete pads.


Category: gate activators | gate actuators | gate operators...

MasterFormat: Gate Operators



DoorKing, Inc.
120 S. Glasgow Avenue
Inglewood, CA 90301
Tel: (800) 826-7493
Fax: (310) 641-1586

info@doorking.com

https://www.doorking.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


6003 Residential Swing Gate Actuator

DKS 6003 Swing Gate Actuators offer convenience and reliability in a compact, aesthetic design. These Actuators mount directly to your gate and pilaster, which simplifies installation without the need for concrete pads. The powerful screw-driven pistons in these Actuators connect directly to the gate, eliminating weak mechanical connections, and they are fully enclosed to prevent dirt and other airborne corrosives from contaminating the screw threads. Plus, there is no need to worry about hydraulic leaks, check valves or pumps.

These Actuators feature built-in limit switches that precisely control the start/stop speed and travel of your gate. The microprocessor-based electronic control board provides many advanced features not typically found in Operators in this class, and with a 24 volt DC operating voltage, DKS Actuators are ideal for residential applications.

The DKS residential swing gate actuator offers convenience and reliability in a compact design. The actuator mounts directly on your gate and pilaster, simplifying installation and eliminating the need for concrete pads. This compact actuator uses extruded aluminum material to provide a clean profile that will blend in with any gate design. But beauty is not just skin deep with the DKS actuator. The powerful screw driven piston connects directly to the gate eliminating weak mechanical connections and it is fully enclosed to prevent dirt and other airborne corrosives from contaminating the screw threads. And there is no need to worry about hydraulic leaks, check valves or pumps.
The 6003 actuator operates on 24 Volt DC power and features built in limit switches that precisely control the start / stop speed, and travel of your gate. The microprocessor based electronic control board provides many advanced features typically not found in operators in this class. The control box can be powered by 120 Volt AC, which is then converted to 24 Volt DC to power the actuator and control board. Two 120 Volt control boxes are available to choose from, Deluxe and Standard. The Deluxe control box includes three 120 VAC outlets to power accessory transformers. Both include 3.5 Ah (Amp Hour) batteries for back-up power operation. You can also select our Solar Powered control box, which eliminates the need for high voltage power runs.


Features:
  • Internal adjustable limit switches.

  • Slow start / slow stop.

  • Overlap feature for dual swing gate operation.

  • Magnetic lock output.

  • Ports for plug-in loop detectors.

  • Fully enclosed screw drive.

  • 24 VDC operating power.

  • Built-in battery back-up.

  • Separate control panel.

  • Keyed release for manual operation.

Specifications:
  • Maximum gate width 10-feet. (Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator. )

  • Swings gate 90 degrees in approximately 16-seconds.

  • Actuator operates at 24 Volts DC power.

  • Class I applications.

  • Compliant with UL 325 and 991. (Note: To be compliant with UL 325 and industry safety guidelines, additional Type B1 and/or Type B2 entrapment protection devices need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)

  • *Dimensions (actuator only): 5"W x 5"H x 35 "L. These dimensions are at the widest part of the actuator. It tapers down to approximately 2-1/2" x 3".

  • Dimensions (120 Volt deluxe control box): 14.5"W x 24"H x 4.25"D

  • Dimensions (120 Volt standard control box): 12.5"W x 16.5"H x 4.25"D

  • Dimensions (24 Volt Solar control box): 13"W x 21"H x 8"D

Options:

Bi-parting gate connection cable.
Magnetic gate lock.
Plug-in loop detectors.
Solar power.


See More


Specifications

Soft Start/Soft Stop
Provides smooth gate operation.
Fully Enclosed
Screw drive protects screw threads.
Electronic Control Box
Solar options available.
Reliability
In a compact and simple to install design.
Styles
6003 ActuatorControl Box - 120 VAC
Sweetsstakes