DoorKing, Inc. -Swing Gate Accessories

DOWNLOADS

Uphill Arm Pivot Assembly

  • Used to connect Operator arm when the Operator has been installed horizontally level and the gate opens on an uphill or downhill slope

  • 6500-490 for use with 6050, 6100, 6300, and 6500 operators


Category: commercial gates | gate hinges | swing gates...

MasterFormat: Site Improvements | Fences and Gates



DoorKing, Inc.
120 S. Glasgow Avenue
Inglewood, CA 90301
Tel: (800) 826-7493
Fax: (310) 641-1586

info@doorking.com

https://www.doorking.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Swing Gate Accessories

Uphill Arm Pivot Assembly

  • Used to connect Operator arm when the Operator has been installed horizontally level and the gate opens on an uphill or downhill slope

  • 6500-490 for use with 6050, 6100, 6300, and 6500 operators

  • 6550-490 for use with 6550 operator

  • Should be used with 1203-084 Torsion Rod Assembly

Base Plates

  • 2600-664 Concrete base plate - use to mount 6050 or 6100 post mount operators onto an existing concrete pad

  • 2600-260 Mounting pipe - use with 6050 and 6100 post mount operators. 2-1/2 O.D. x 3 ft. pipe, threaded on one end

  • 6500-490 Uphill Arm Ppivot Assembly - sue with 6050, 6100, 6300, and 6500 operators when the gate opens on an uphill slope. Should be used with 1203-084 Torsion Rod Assembly

  • 9310-201 Steel base plate - use with 9310 1/2 HP operators

  • 9310-202 Steel base plate - use with 9310 1 HP operators

Moly D Grease
  • 2600-770

  • 14 oz. tube Molybdenum Disulfide (Moly D) multi-purpose grease for swing gate worm gears


See More


Specifications

Counter Balance
For uphill swing gates.
Ball Joint Pivot Assembly
Heavy Duty
Flange bearing hinge assembly for heavy wrought iron gates.
Bi-Parting Connection Cable
  • 2600‐754 Primary / Secondary Cable - 500 ft. roll

  • 2600‐755 Primary / Secondary Cable - 30 ft. roll

  • 2600‐756 Primary / Secondary Cable - 40 ft. roll

  • 2600‐757 Primary / Secondary Cable - 50 ft. roll

Flange Bearing Hinge
  • 1200-009 3000 Lb. wieght capacity

  • 1200-010 replacement bearing

  • The DKS Swing Gate Hinges are designed for heavy wrought iron gates

  • Two are used at the extreme top and bottom of the gate

  • Zert grease fitting

  • Includes mounting bracket and hardware

  • Two required per gate (top, bottom.

  • Designed for use with 2” gate frame

Sealed Bearing Hinge
  • 1200-019 2000 Lb. weight capacity

  • 1200-039 3000 Lb. weight capacity

  • Includes mounting bracket and hardware

  • Two required per gate (top, bottom)

  • Designed for use with round or square gate frames

Torsion Rod Assembly
  • Counter‐balances uphill swing gates

  • 1203-084 includes top bracket, bottom bracket and one (1) torsion rod

  • 2600-299 additional torsion rods. Up to five (5) additional torsion rods can be added

Sweetsstakes