List Industries, Inc. -All-Star® Sports Locker

DOWNLOADS

The All-Star sport locker’s quality, functionality, and durability raised the bar for sport lockers. All-Star lockers feature our exclusive Hollow-T framing system, with 1/2” 13 gauge flattened expanded metal sides for maximum ventilation, safety, and rigidity.


Category: lockers | metal lockers | open front lockers...

MasterFormat: Storage Specialties | Lockers | Metal Lockers



List Industries, Inc.
401 Jim Moran Blvd.
PO Box 9601
Deerfield Beach, FL 33442
Tel: (800) 776-1342
Fax: (954) 428-3843

info@listindustries.com

http://www.listindustries.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


All-Star® Sports Locker

The All-Star sport locker’s quality, functionality, and durability raised the bar for sport lockers. All-Star lockers feature our exclusive Hollow-T framing system, with 1/2” 13 gauge flattened expanded metal sides for maximum ventilation, safety, and rigidity. Interlocking body components create a functional yet sturdy sports locker, guaranteed to last a lifetime. The versatility of our Hollow-T framing system allows you to customize a locker to your specific requirements.

Features:

Body/Frame: All MIG welded construction. 16 gauge Hollow-T tubular sections running top-to-bottom at all 4 corners of each locker column. 16 gauge double channel run front to back at both the top and bottom of each locker side Vertical Side Panels: 13 gauge cold rolled steel 1/2’’ flattened expanded metal framed by Hollow-T tubular framing system. Locker Base: 14 gauge cold rolled steel channel running full width of welded locker unit at both front and back

Coat Rods: Optional Stainless Steel Coat Rod: Full locker width coat rod Shall be 1” diameter stainless steel tubing

Doors: OPTIONAL UPPER WALLET SECURITY BOX OPTIONAL UPPER 12" WIDE SECURITY BOX OPTIONAL UPPER FULL WIDTH SECURITY BOX

Handle: Finger Pull (security boxes), Padlock Hasp

Latching: Friction Catch, Spring Bolt, Padlock Loop

Shelves: 1 fixed shelf

Warranty: Lifetime

Optional Upper Security Compartments (utilizing standard hat shelf):

Wallet Security Box: Shall be 7-1/4” wide x 9” deep x 7-1/4” high fabricated from 16 gauge cold rolled sheet steel and include a 14 gauge side hinged solid door. Door hinge shall be a 16 gauge piano hinge. Security Box to be securely riveted to the front right corner of hat shelf. Door to have a combination friction catch door pull. Padlock Strike Plates are optional.

12" Wide Security Box: To be formed of 14 gauge cold rolled sheet steel and securely MIG welded in place. The Door to be 14 gauge cold rolled sheet steel with plain (non-ventilated) door. Two heavy-duty 13 gauge 7-knuckle 3-1/2" hinges are to be MIG welded to the door and riveted to the side of the security box. Door to have a projecting combination spring-bolt/padlock hasp door pull. Padlock Strike Plates are optional.

Full-Width Upper Security Compartment: Shall be top hinged and be fabricated from single sheet prime 14 gauge with single bend at top and sides with a double bend at latch point (bottom). Door shall be perforated with Security-Plus ventilation. A spring loaded galvanized latch assembly shall be securely welded to the inside of the door. The latch shall be a minimum of 11 gauge, be equipped with a stainless steel spring and shall automatically engage when door is closed. Rubber bumpers shall be riveted to return bends on doors. Locking devise shall be designed for use with both a padlock and built-in lock. Top hinged gym door shall be hinged using a 3/16" diameter continuous hinge rod completely recessed into the door with a concealed fastener. Padlock Strike Plates are optional.

Optional Lower Seat or Foot Locker

Optional Lower Seat/Shelf: Shall be 16 gauge galvanneal sheet steel, have double bends at front and shall engage slots in the Hollow "T" vertical frame members at all four corners and be securely welded to the frame and side. A reinforcing bar shall be welded to the inside of the front return bend for added strength.

Optional Foot Locker: Seat shall be formed of 14 gauge cold rolled sheet steel with stiffener sections for reinforcement and be prepared for padlock. Foot Locker front panel shall be 14 gauge cold rolled sheet steel with Security-Plus ventilation. A rubber bumper is to be mounted to locker back to cushion seat in the open position. Padlock Strike Plates are optional.


See More


Specifications

Locker Sizes:
Widths:12", 15", 18", 24", 3-", 33", 36"
Depths:12", 16", 18", 22"
Nominal Column Heights:60", 72", 84"
Sweetsstakes