Hybrid Sealants - SikaHyflex®-150 LM
ONE PART, LOW MODULUS, HYBRID SEALANT
SikaHyflex®-150 LM is a premium-grade, high movement, fast curing, one component, non-sag, elastomeric, hybrid sealant. Meets ASTM C-920, Type S, Grade NS, Class 50, use NT, M, A, G, O.
- Fast skin time (~60 min)
- Excellent adhesion to porous and nonporous substrates
- Superior UV resistance and weathering
- Color retention - white stays white
- Can be over-painted immediately after application.
- Very low VOC
- Non-staining
Usage
- For jointsor gaps connecting dissimilar substrates - e.g. vinyl to concrete, aluminum to EIFS.
- Window Perimeter
- Expansion joints
- Curtain Wall construction
- For applications that require both paintability and adhesion to non-porous substrates
- When easy cold weather application is desired
Advantages
- Fast skin time (~60 min)
- Excellent adhesion to porous and nonporous substrates
- Superior UV resistance and weathering
- Color retention - white stays white
- Can be over-painted immediately after application.
- Very low VOC
- Non-staining
Packaging
10.1 fl. oz. (300 ml) cartridge
20 fl. oz. (600 ml) uni-pac sausage
Color
White, Limestone, Off-white, Tan, Stone, Aluminum Gray, Redwood Tan, Medium Bronze, Special Bronze, & Black
Product Details
Product Information
Shelf Life12 months
Storage ConditionsStore dry between 40 °F (5 °C) and 80 °F (27 °C) at 50 % R.H. Condition Material to 65-75 °F (18-24 °C) before using.
Volatile organic compound (VOC) contentSee Product Safety Data Sheet
Technical Information
Service Temperature-40-170 °F (-40-77 °C)
Resistance to WeatheringExcellent
Application
Application Information
Ambient Air Temperature40-100 °F (4-38 °C). Sealant should be installed when joint is at midrange of its anticipated movement.
Application Steps
SUBSTRATE PREPARATIONThe substrate must be clean, dry, frost free, sound and free of any oils, greases or incompatible sealers, paints or coatings that may interfere with adhesion.
POROUS SUBSTRATES - clean by mechanical methods to expose a sound surface free of contamination and laitance.
NON-POROUS SUBSTRATES - for cleaning non-porous substrates, use two rag wipe method using alcohol, xylene or an approved commercial solvent. Allow solvent to evaporate prior to sealant application.
Priming
SikaHyflex®-150 LM is designed to obtain adhesion without the use of a primer; however, certain substrates may require a primer. Test by applying the sealant and/or primer sealant combination to confirm results and proposed application methods. *In the situation where primer is needed on porous surfaces use Sika® Primer 429. For non-porous surfaces contact Technical Services for proper recommendation.
See More
See Less