Flooring Levelers & Patches - SikaLevel®-825 Lite

Premium Gypsum Based Self-leveling Underlayment

SikaLevel®-825 Lite is a one-component, durable and versatile premium gypsum-based underlayment for interior gypsum, concrete, cementitious, and various other substrates. It can be applied manually or by pump to produce a self-smoothing, rapid-setting, and flat substrate prior to the application of a final floor finish. Application thickness is 1/16” up to 2” (1.5 to 50.8 mm).

• Suitable on gypsum, cement-based, dimensionally unstable and other difficult substrates
• For interior use
• Sets very rapidly for fast job turnaround
• Low dust
• Smooth, fluid and workable
• Free of cracks
• Can be pumped
• High strength
• Very low shrinkage
• Suitable for application on subfloor heating systems
• Suitable for castor wheels loading
• Only a 10-minute waiting time for applications over gypsum, concrete, and cement substrates when using Sika^® Level-01 Primer Plus
  

Usage

• Concrete
• Gypsum
• Cement substrates
• Rapid drying cement screed systems
• OSB/Plywood only suitable for flexible coverings
• Ceramic tiles, terrazzo or natural stones
• Old water-resistant adhesive residues
• For use with SikaBond® adhesives, a minimum application of 1/8" thickness is required

Advantages

• Suitable on gypsum, cement-based, dimensionally unstable and other difficult substrates
• For interior use
• Sets very rapidly for fast job turnaround
• Low dust
• Smooth, fluid and workable
• Free of cracks
• Can be pumped
• High strength
• Very low shrinkage
• Suitable for application on subfloor heating systems
• Suitable for castor wheels loading
• Only a 10-minute waiting time for applications over gypsum, concrete, and cement substrates when using Sika^® Level-01 Primer Plus
  

Packaging

55 lb (24.9 kg) bag

Color

Light gray powder

Product Details

Product Information

Gypsum-based, polymer-modified binder system and fillers

12 months from date of production if stored properly in original, unopened and undamaged sealed packaging

Store dry at 41-86 °F (5-30 °C)
Protect from moisture. If damp, discard material.

Application

Application Information

6.3 qts (6 L)

65-75 °F (18-24 °C)

41-86 °F (5-30 °C)

Note: When using water-based adhesives on the finished product the best results will be achieved at ambient and substrate temperatures between 59 and 77 °F (15-25 °C).

< 75 %

Note: The substrate and uncured product applied on the floor, must be at least 5 °F above dew point to reduce the risk of condensation, blooming or cement laitance forming on the surface.

41-86 °F (5-30 °C)

~ 30 minutes

As the temperature will affect the pot life, application temperature:

• Above 73 °F (23 °C) will reduce the pot life and the working time.

• Below 73 °F (23 °C) will extend the pot life and the working time.

Consumption

30-35 ft² at 1/4” (2.78-3.25 m² at 6 mm) per bag

(Coverage figures do not include allowance for surface profile and porosity or material waste)

Application Steps

All substrate must be dry, stable, sound and free of all contaminants such as grease, oil, paint, wax, dust, curing and sealing compounds that will interfere with the penetration of the primer and the adhesion of SikaLevel®-825 Lite.

• Pour 6.3 qts (6 L) of cool potable water (~ 70 °F, 21.1 °C) into a suitably sized and clean mixing container, using a calibrated measuring jug, or similar, to ensure strict control of the water content (do not over-water). If available water is not at this temperature, then consideration should be given to cooling/heating the water.
• Add SikaLevel®-825 Lite to the water, while slowly mixing, adding the complete contents of the bag.
• Mix with a high-speed drill (> 650 rpm) and an egg beater style mixing paddle to blend water and powder for approximately 3 minutes, until a lump-free and uniform mix has been produced.
• Do not overmix or allow the paddle to rise above the level of material as this will introduce and entrap air into the mix, potentially shortening the working life or causing pin-holing in the underlayment.
• Let the mixed material stand until the majority of air bubbles have dispersed.

• Pour the mix and spread using a smoothing trowel. Even surfaces are easily achieved using a pin leveler.
• It’s not recommended to remove troweling defects or to level more than once.
• If a second layer of leveling compound has to be applied, prime the first layer with Sika^® Level-01 Primer Plus (1:1) when the first layer is walkable. The maximum layer thickness must not be exceeded in the case of two layer applications and the second layer must not exceed the layer thickness of the first layer.
• Protect curing SikaLevel®-825 Lite layers from high ambient temperatures, direct sunlight and ensure adequate air circulation.
• SikaLevel®-825 Lite does not provide an aesthetic finish and is not intended to be used as a wear layer even if coated or sealed. SikaLevel®-825 Lite must be protected from any type of contamination by installing a suitable floor covering like ceramic tiles, carpet, VCT, wood floor, etc.
• Always install an adequate number of properly located test areas, to include the finish flooring.
• As floor coverings vary, always contact and rely upon the floor covering manufacturer for specific directions such as maximum allowable moisture content, adhesive selection, and intended end use of the product.

• Clean all tools and application equipment with water immediately after use.
• Hardened / cured material can only be removed mechanically.

See More

See Less