General Polymers, The Sherwin-Williams Company - Industrial Flooring

When it comes to seamless systems, the General Polymers product line is the most comprehensive in the industry. Chemistries include cementitious, acrylic, epoxy, Novolac, and urethane elastomers...


Category: quartz flooring | towel applied flooring | towel-applied flooring...

MasterFormat: Concrete Finishing | Pedestrian Traffic Coatings | Quartz Flooring...



General Polymers, The Sherwin-Williams Company
145 Caldwell Dr.
Cincinnati, OH 45216
Tel: (800) 543-7694
Fax: (513) 761-1330

caitlin.rose@sherwin.com

http://www.sherwin-williams.com

Request More Info

DOWNLOADS

Related Products

Overview



INDUSTRIAL FLOORING SYSTEMS

General Polymers products and systems are designed to meet the toughest Industrial Flooring environments. Floor care and system selection starts with crack repair and joint protection, followed by installation of the system to meet the demands of service, timing and exposures. Coatings provide concrete protection and dust proofing, slurry and broadcast systems withstand heavy traffic, and mortar systems provide the most protection in addition to repairing and resurfacing damaged floors.

TPM™ #115 STANDARD TROWELED MORTAR (S1-S5)



Product Description
General Polymers TPM #115 STANDARD TROWELED MORTAR (S1-S5) SYSTEMS are 1/4" high-build protective resurfacing systems combining an epoxy and silica aggregate into a mortar, high-build grout and seal coats. Different seal coat options are available for specific needs: TPM #115-S1 for semi-gloss finish, TPM #115-S2 for a high gloss finish, TPM #115-S3 for moderate chemical resistance, TPM #115-S4 for harsh chemical resistance and TPM #115-S5 utilizes a 100% solids, zero VOC polyurethane topcoat (POLY-COTE™) for excellent wear and chemical resistance.

Advantages

• 100% solids available in TPM #115-S3 and S4
• -0- VOC for low odor during installation (S3, S4 & S5)
• Protects substrates from thermal shock, heavy impact, and wear
• Resists degradation from many chemicals, acids, and alkalis
• Wide range of colors available
• Heavy duty 1/4" nominal thickness

Uses

• Traffic aisles and manufacturing
• Pulp and paper plants
• Wastewater treatment facilities
• Pharmaceuticals
• Drum storage areas
• Petroleum refineries
• Food and beverage facilities

FasTop™ URETHANE FLOORING SYSTEM

Product Description
General Polymers FasTop URETHANE SYSTEMS are zero VOC, low odor, slurry/broadcast and trowel applied mortar systems installed at 1/4" - 3/8" thickness. FasTop M Urethane Mortar and FasTop S Urethane Slurry Systems are designed for conditions requiring rapid installation and protection of the concrete, wood or steel substrate from thermal shock, impact, corrosion, mild chemical attack and abrasion.
FasTop M System is trowel applied and provides some skid inhibitance under most wet process conditions, and will remain so throughout the life of the floor. FasTop M System can be used on new concrete, or to restore rough or badly damaged floor surfaces that have been exposed to years of contamination. FasTop M System is extremely durable, and in most cases, has physical characteristics which are approximately double that of concrete.
FasTop S System is a slurry applied system with optional broadcast to build to 1/4” thickness. The system extremely fast and is ready for traffic within 4 to 6 hours. A topcoat may be applied to increase aesthetics and or chemical resistance.
FasTop S-U1 System is a slurry applied system with a decorative quartz broadcast. A topcoat must be applied to lock in the quartz aggregate and create a cleanable surface. This decorative upgrade option will increase the installation time.

Advantages

• Bonds to slightly damp substrate
• Thermal shock resistant
• Unaffected by freeze/thaw cycles
• Wide service temperature range (-50ºF to 235ºF)
• Optional primer and topcoat
• Impact resistant
• Low to no odor, 0 VOC
• Interior or exterior use
• Acceptable for use in USDA inspected food processing areas
• Chemical resistant to:

28 Day Exposure @ 72ºF Result
Alcohol
NE
Ethylene Glycol
NE
Fats, Oils & Sugars
NE
Gasoline, Diesel & Kerosine
NE
Hydrochloric Acid (<35%)
NE
Lactic Acid (Milk)
NE
Mineral Oils
NE
Most Organic Solvents
NE
Muriatic Acid
NE
Nitric Acid (<10%)
NE
Nitric Acid (<30%)
Slight Softening
PM Acetate
NE
Phosphoric Acid (<50%)
NE
Potassium Hydroxide (<50%)
NE
Sodium Hydroxide (<50%)
NE
Sulfuric Acid (<50%)
Slight Gloss Loss
Water
NE
Xylene NE

(NE= No Effect)
 

Uses

• Cagewash areas
• Chemical processing plants
• Commercial kitchens
• Dairy plants
• Meat and poultry plants
• Pulp and paper plants
• Restrooms and concession stands
• Sugar processing plants
• Walk-in coolers
• Walk-thru autoclaves
• Wastewater treatment facilities

TRAFFICOTE™ #105 SELF-LEVELING FLOORING SYSTEM

Product Description
General Polymers TRAFFICOTE #105 FLOORING SYSTEM is a standard high-build (1/16" - 1/8"), protective self-leveling system which utilizes 100% solids binder resins and selected aggregates to produce a resin rich material that is easily applied with a v-notched trowel or squeegee.

Advantages

• Acceptable for use in USDA inspected food processing areas
• Seamless, easy-to-clean surface
• Durable
• Chemical and stain resistant
• -0- VOC, low odor (with appropriate seal coat)

Uses

• Manufacturing areas
• Animal care
• Clean rooms
• Pharmaceuticals
• Locker rooms and restrooms
• Packaging and storage areas

EPO-FLEX® INDUSTRIAL FLOOR SYSTEM (1/8")

Product Description
General Polymers EPO-FLEX INDUSTRIAL FLOOR combines EPO-FLEX with hard aggregate to provide a tough traffic bearing system. Flexibility is achieved without the use of plasticizers or other additives which can separate or migrate as the system ages. This means that the product remains flexible and continues to function for many years. Fiberglass scrim may be incorporated into the system to add tensile strength. The use of a hard aggregate provides abrasion and impact resistance, as well as skid inhibition properties. Various topcoats can be specified to provide protection against water, oils, chemicals and ultraviolet light.

Advantages

• -0- VOC
• Abrasion Resistant
• Color options
• Slip resistant
• Chemical and stain resistant

Uses

• Industrial floor
• Warehouses

EPOXY COATINGS

Product Description
General Polymers EPOXY FLOOR COATINGS are high performance epoxy coatings that has been designed to provide a high gloss, semi-gloss or stipple finish with above average chemical resistant protection. EPOXY FLOOR COATINGS offers protection against splash, spillage and fumes of many process chemicals, caustic cleaners, oils, fuels and acids. EPOXY FLOOR COATINGS provides attractive finishes and should be used wherever a high-build, protective coating is required.

Advantages

• Chemical and abrasion resistant
• Good hiding
• High mil build per coat speeds project turnaround
• Acceptable for use in USDA inspected facilities

Uses

• Warehouses
• Automotive Service Areas
• Industrial plants

AIRCRAFT HANGAR/INDUSTRIAL PLANT FLOOR COATING

Product Description
General Polymers AIRCRAFT HANGAR/INDUSTRIAL PLANT FLOOR COATING provides a high gloss chemical and stain resistant coating. Excellent durability and abrasion resistance allows 4608P Polyurethane Enamel Coating to act as a stand alone coating or seal coat over thicker systems.

Advantages

• Excellent gloss retention
• Chemical and stain resistant
• Resists common acids, fuels, grease, salt and Skydrol

Uses

• Semiconductor manufacturing
• Aircraft hangars
• Warehouses
• Industrial plants

Offices:

Cincinnati:
145 Caldwell Drive
Cincinnati, OH 45216
(800) 543-7694
(513) 761-0011
(513) 761-1330 Fax

Los Angeles:
12341 Gladstone Avenue
Sylmar, CA 91342
(800) 624-5041
(818) 365-9261
(818) 361-8023 Fax




Sweets app for Revit – Learn More