Foster™ -Foster® 82-77 Cryogenic Adhesive

DOWNLOADS

FOSTER CRYOGENIC ADHESIVE FOSTER CRYOGENIC ADHESIVE is a chemically-curing composition which develops high tensile strength and adhesion, at room temperature, to a variety of surfaces including metal, wood, and masonry. It is supplied at virtually 100% solids enabling immediate bonding between non-p


Category: commercial insulation | isocyanurate insulation | plumbing insulation...

MasterFormat: Common Work Results for Wood, Plastics, and Composites | Adhesives* | Thermal Protection...


Related Products

Overview


Foster® 82-77 Cryogenic Adhesive



FOSTER CRYOGENIC ADHESIVE

FOSTER CRYOGENIC ADHESIVE is a chemically-curing composition which develops high tensile strength and adhesion, at room temperature, to a variety of surfaces including metal, wood, and masonry. It is supplied at virtually 100% solids enabling immediate bonding between non-porous surfaces without solvent entrapment problems.

CRYOGENIC ADHESIVE also can be used as a fabricating adhesive. It often provides bonds stronger than the materials being joined. The cured film has excellent resistance to solvents, water, and many chemicals. The adhesive also performs well with various materials after thermal shock exposure at cryogenic temperatures. It is an ideal choice for bonding steel pipe shoes or saddles to pipe insulation assemblies.

CRYOGENIC ADHESIVE meets requirements for LEED IEQ 4.1 Low-Emitting Materials, Adhesives and Sealants. VOC 82-77 Part A: 0 g/l, less water and exempt solvents. VOC 82-77 Part B: 0 g/l, less water and exempt solvents.

CRYOGENIC ADHESIVE contains no asbestos, lead, mercury, or mercury compounds.

LIMITATIONS
Store between 40ºF (4ºC) and 100ºF (38ºC). Apply between 60ºF (16ºC) and 100ºF (38ºC). Pot life is longer at lower temperatures, shorter at higher temperatures. Mixing large quantities also shortens pot life, thus mixing more than one kit at a time is not recommended. 0413


COLOR:
Black

APPLICATION CONSISTENCY:
Notched Trowel

BLENDED AVERAGE WEIGHT / U.S. GALLON (ASTM D 1475):
(Supplied as a 3-part 40 lb. kit) 15.5 lbs./gal. yields 2.6 gallons (1.85 kg/l yields 9.8 liters)

COVERAGE RANGE (FSTM 71):
(Subject to nature of material being bonded.) Per 40 lb. kit: 1/16 inch - 66.7 sq. ft. (6.2 sq meters @1.6mm) 1/8 inch - 33.4 sq. ft. (3.1 sq meters @ 3.2 mm) 1/4 inch - 16.7 sq. ft. (1.55 sq meters @ 6.4mm)

BONDING TIME (FSTM 67):
Air dry: 0-1 hour Set through: 4 hours Full cure: 1 week (dependent on temperature)

POT LIFE (FSTM 91B):
1.5 hours at 73ºF (23ºC) 0.5 hours at 95ºF (35ºC)

SERVICE TEMPERATURE LIMITS (FSTM 70):
(Temperature at coated surface) -320ºF to 250ºF (-196ºC to 121ºC)

WET FLAMMABILITY (ASTM D 93):
Greater than 250ºF (121ºC)

COMBUSTIBILITY (FSTM 44):
Combustible TM TradeMark of HB Fuller Construction Products Inc.

Visit us on the web at www.fosterproducts.com


See More


Sweetsstakes