09 90 00 - Painting and Coating

Below you will find links to company and product information for manufacturers and suppliers listed in the Painting and Coating section of Sweets... more


1,526 Products
Results per page:

Benjamin Moore & Co - Epoxy Patch Kit - (V165) - USA
Benjamin Moore & Co - Epoxy Patch Kit - (V165) - USA
Description: Epoxy Patch Kit is a 100% solids epoxy co-polymer matrix for repairing and patching interior concrete floors. It sets rapidly with extremely high initial strength and is ready for foot traffic in...

Manufacturer: Benjamin Moore & Co

MasterFormat: Painting and Coating | Cast-In-Place Concrete | High-Performance Coatings...


The Sherwin-Williams Company - Pro Industrial Multi-Surface Acrylic
The Sherwin-Williams Company - Pro Industrial Multi-Surface Acrylic
Description: Pro Industrial™ Multi-Surface Acrylic is specifically engineered to provide high hide and good stain resistance.

Johns Manville Roofing Systems - Asphalt Primer
Johns Manville Roofing Systems - Asphalt Primer
Description: Johns Manville Asphalt Primer is a specification grade, penetrating priming solution of selected asphalt base in petroleum solvent.

W.R. Meadows - CEM-KOTE FLEX ST - Flexible Cementitious Waterproofing
W.R. Meadows - CEM-KOTE FLEX ST - Flexible Cementitious Waterproofing
Description: CEM-KOTE FLEX ST is a highly flexible, fiber-reinforced, breathable, cementitious slurry, consisting of dry Component A and liquid Component B.

Rust-Oleum Corporation - Seal-Krete Metallic Systems
Rust-Oleum Corporation - Seal-Krete Metallic Systems
Description: If you’re looking to provide your customers with a dose of drama in any space, Seal-Krete Metallic Systems will be the answer

Manufacturer: Rust-Oleum Corporation

Category: commercial coatings | epoxy coatings | epoxy flooring...

MasterFormat: Painting and Coating | Fluid-Applied Flooring | Epoxy Coatings...


CENTRIA International - Allura™ Coating System
CENTRIA International - Allura™ Coating System
Description: CENTRIA’s Allura Coating System is a premium, field-proven fluoropolymer coating featuring a matte, low-gloss finish combined with a subtle aggregate texture. The Allura Coating System is...

CENTRIA - Allusion Print Coat System - Non-Directional
CENTRIA - Allusion Print Coat System - Non-Directional
Description: Allusion Coatings accurately simulate expensive natural finishes, including wood and specialty metals, using high performance print coating technology.

Manufacturer: CENTRIA

Category: coatings | finishes | top coating...

MasterFormat: Painting and Coating | Common Work Results for Metals | Shop-Applied Coatings for Metal...


LATICRETE International, Inc. - L&M™ AQUAPEL™/AQUAPEL PLUS™ Water Repellent
LATICRETE International, Inc. - L&M™ AQUAPEL™/AQUAPEL PLUS™ Water Repellent
Description: L&M™ AQUAPEL™ is a new generation, 100% reactive, waterborne silane-siloxane sealer. This clear, penetrating, breathable water repellent is ideal for use on interior and exterior...

Manufacturer: LATICRETE International, Inc.

Category: coatings | concrete coatings | concrete paints...

MasterFormat: Painting and Coating | Cast-In-Place Concrete | Concrete Finishing...


Johns Manville Insulation Systems - Intumescent Coatings
Johns Manville Insulation Systems - Intumescent Coatings
Description: Johns Manville Intumescent Coatings are for application over spray-foam insulations to reduce heat transfer and surface burning in the event of a fire.

Manufacturer: Johns Manville Insulation Systems

Category: coatings | finishes | intumescent paint...

MasterFormat: Painting and Coating | Thermal Protection | Applied Fireproofing...


Five Star Products, Inc. - Rapid Surface Repair PF-60
Five Star Products, Inc. - Rapid Surface Repair PF-60
Description: Five Star® Rapid Surface Repair PF-60 is a unique, low viscosity, two-part liquid, polyurethane-hybrid polymer. When supplemented with aggregates, this product is used to repair and...

Action Floor Systems - Action Herculan IG Resinous Flooring
Action Floor Systems - Action Herculan IG Resinous Flooring
Description: Action Herculan IG provides a durable, aesthetically pleasing and easy-to-maintain floor surface option for many commercial and institutional applications.

Manufacturer: Action Floor Systems

Category: cast in place flooring | flooring | fluid-applied surfacing...

MasterFormat: Painting and Coating | Flooring | Fluid-Applied Flooring...


Key Resin Company - Key Epoxy Terrazzo Aggregates
Key Resin Company - Key Epoxy Terrazzo Aggregates
Description: KEY EPOXY TERRAZZO AGGREGATES are the highest quality Mother of Pearl, colored porcelain and ceramics, glass, and mirror sourced direct from China.

Manufacturer: Key Resin Company

Category: cast in place flooring | flooring aggregates | polymeric flooring...

MasterFormat: Painting and Coating | Fluid-Applied Flooring | Resinous Flooring...


CertainTeed Commercial Roofing - FlintCoat® -A 150
CertainTeed Commercial Roofing - FlintCoat® -A 150
Description: CertainTeed FlintCoat® -A 150 Fibered Aluminum Roof Coating is a quality, professional grade reflective coating formulated to provide a bright and long lasting finish. The aluminum pigment...

GAF - StreetBond® SB150 Pavement Coating
GAF - StreetBond® SB150 Pavement Coating
Description: Developed for use over imprinted or flat asphalt, StreetBond ® SB150 Pavement Coating bonds permanently to asphalt surfaces to provide both an enduring, aesthetic finish and a low- maintenance surface that helps protect and extend the life of the pavement. Apply to crosswalks, parking lots,...

Manufacturer: GAF

Category: asphalt sealers | flexible paving surface treatment | pavement coatings...

MasterFormat: Painting and Coating | Cast-In-Place Concrete | Concrete Finishing...


TEC® - LiquiDam™ Penetrating Moisture Vapor Barrier
TEC® - LiquiDam™ Penetrating Moisture Vapor Barrier
Description: Formulated to be applied to damp or new concrete, as little as 48 hours old with a moisture vapor emission rate (MVER) less than or equal to 25 lbs. per 1000 ft² per 24 hours or a maximum...

Manufacturer: TEC®

Category: alkali-resistant coatings | bond coatings | concrete coatings...

MasterFormat: Painting and Coating | Concrete Finishing | Flooring...


Right Pointe, LLC - Right Finish - Cement Based Coating
Right Pointe, LLC - Right Finish - Cement Based Coating
Description: RIGHT FINISH is a polymer modified cement based coating designed to enhance the finished appearance of precast, tilt up and other unfinished concrete surfaces. USE AND...

Manufacturer: Right Pointe, LLC

Category: concrete paints | top coating | topcoat...

MasterFormat: Painting and Coating | Cast-In-Place Concrete | Concrete Finishing...


RectorSeal - Metacaulk® Industrial Cable Coating
RectorSeal - Metacaulk® Industrial Cable Coating
Description: Metacaulk® Firestop Sealants Safety Data Sheet: / Metacaulk® Industrial Cable Coating is a heavy duty, acrylic latex based coating used to prevent flame...

Manufacturer: RectorSeal

Category: fire barriers | fire retardant paints | fire stopping...

MasterFormat: Painting and Coating | Firestopping | High-Performance Coatings...


Textured Coatings of America, Inc. - COOLWALL® Heat Reflective Wall Coating System
Textured Coatings of America, Inc. - COOLWALL® Heat Reflective Wall Coating System
Description: The COOLWALL® SUPER • COTE™ system is a superior heat reflective water based exterior coating. This highly breathable system has been formulated for superior salt spray, moisture,...

Acoustical Surfaces, Inc. - Coat of Silence Sound Reducing Paint System
Acoustical Surfaces, Inc. - Coat of Silence Sound Reducing Paint System
Description: Coat of Silence Sound Reducing Paint System Coat of Silence ™ Spray-On Sound Reducing Coating Introducing Coat of Silence – the easy to use, spray on coating for all your...

Manufacturer: Acoustical Surfaces, Inc.

Category: acoustic barriers | acoustical barriers | drywall coatings...

MasterFormat: Painting and Coating | Maintenance of Finishes | Wall Finishes...


Behr Process Corporation - BEHR PREMIUM Textured DECKOVER® No. 5005
Behr Process Corporation - BEHR PREMIUM Textured DECKOVER® No. 5005
Description: Bring new life to old wood and concrete surfaces with BEHR PREMIUM DECKOVER. This 100% acrylic formula conceals cracks and splinters up to 1/4", and creates a smooth, slip-resistant finish...

Manufacturer: Behr Process Corporation

Category: coatings | decorative coatings | final coat...

MasterFormat: Painting and Coating | Concrete Finishing | Flooring Treatment...


Bostik - D-250™ Moisture Vapor Barrier Coating
Bostik - D-250™ Moisture Vapor Barrier Coating
Description: Bostik D-250™ is a high performance, rapid drying, water-based, penetrating epoxy formulated to dramatically reduce moisture vapor transmission and surface alkalinity from substrates....

Manufacturer: Bostik

Category: epoxy | mildew check coatings | waterbase coatings...

MasterFormat: Painting and Coating | Cast-In-Place Concrete | Flooring...


Maxxon Corporation - Maxxon® MVP (Moisture Vapor Protection)
Maxxon Corporation - Maxxon® MVP (Moisture Vapor Protection)
Description: Maxxon® MVP (Moisture Vapor Protection) is a unique 2-component, moisture tolerant, high density, chemically enhanced epoxy product which prevents the passage of water vapor...

CHAPCO™ - CHAPCO® 777 Liquid Latex Sealer
CHAPCO™ - CHAPCO® 777 Liquid Latex Sealer
Description: This liquid latex floor sealer provides enhanced adhesion and creates a suitable substrate for a variety of floor coverings, including CAN Powerbond products. Packaging : 1 gallon pail...

Manufacturer: CHAPCO™

Category: commercial coatings | finishes | high-performance coatings...

MasterFormat: Painting and Coating | Flooring | Flooring Installation Products*...


Foster™ - Foster® 30-33 Vapor-Out™ Coating
Foster™ - Foster® 30-33 Vapor-Out™ Coating
Description: FOSTER FIRE RESISTIVE ANTI-ABRASION COATING WATER BASED FOSTER Fire Resistive Anti-Abrasion Coating is a high solids, water based fire resistive bore coating for the inner surfaces of cellular...

Super-Krete Products - S-9304 Micro-Bond™ Gray
Super-Krete Products - S-9304 Micro-Bond™ Gray
Description: Super-Krete S-9304 and S-9306 Micro-Bond are made especially for micro-topping. This cementitious product contains extremely fine sands to create a smoother finish.