03 30 00 - Cast In Place Concrete

Below you will find links to company and product information for manufacturers and suppliers listed in the Cast In Place Concrete section of Sweets... more


743 Products
Results per page:

Benjamin Moore & Co - Epoxy Patch Kit - (V165) - USA
Benjamin Moore & Co - Epoxy Patch Kit - (V165) - USA
Description: Epoxy Patch Kit is a 100% solids epoxy co-polymer matrix for repairing and patching interior concrete floors. It sets rapidly with extremely high initial strength and is ready for foot traffic in...

Manufacturer: Benjamin Moore & Co

MasterFormat: Cast In Place Concrete | Concrete Finishing | Painting and Coating...


The Sherwin-Williams Company - SuperDeck Exterior Deck & Dock Coating
The Sherwin-Williams Company - SuperDeck Exterior Deck & Dock Coating
Description: FEATURING PREMIUM DUCKBACK TECHNOLOGY. The Superdeck® Deck and Dock coating works best on wood, concrete and composite decking that has been severely damaged. It resurfaces and...

W.R. Meadows - CEM-KOTE FLEX ST - Flexible Cementitious Waterproofing
W.R. Meadows - CEM-KOTE FLEX ST - Flexible Cementitious Waterproofing
Description: CEM-KOTE FLEX ST is a highly flexible, fiber-reinforced, breathable, cementitious slurry, consisting of dry Component A and liquid Component B.

Manufacturer: W.R. Meadows

Category: moisture barriers | moisture control | moisture protection...

MasterFormat: Cast In Place Concrete | Concrete Finishing | Dampproofing and Waterproofing...


Rust-Oleum Corporation - Seal-Krete Metallic Systems
Rust-Oleum Corporation - Seal-Krete Metallic Systems
Description: If you’re looking to provide your customers with a dose of drama in any space, Seal-Krete Metallic Systems will be the answer

Manufacturer: Rust-Oleum Corporation

Category: commercial flooring | decorative coatings | hospitality flooring...

MasterFormat: Cast In Place Concrete | Resinous Flooring | Epoxy Coatings...


LATICRETE International, Inc. - L&M™ SEAL HARD® Liquid Chemical Hardener Densifier
LATICRETE International, Inc. - L&M™ SEAL HARD® Liquid Chemical Hardener Densifier
Description: L&M™ SEAL HARD® is a proprietary, colorless, environmentally safe chemical solution that increases the wear surface strength of concrete floors subjected to pedestrian and vehicle...

Five Star Products, Inc. - Rapid Surface Repair Easy Mix
Five Star Products, Inc. - Rapid Surface Repair Easy Mix
Description: Five Star® Rapid Surface Repair Easy Mix is a self-leveling, low viscosity, two-part liquid polyurethane-hybrid polymer. When supplemented with its proprietary blended aggregate, this...

Manufacturer: Five Star Products, Inc.

Category: concrete | concrete floors | concrete maintenance...

MasterFormat: Cast In Place Concrete | Common Work Results for Concrete | Joint Fillers...


Key Resin Company - Key Contain High-Build Coating System
Key Resin Company - Key Contain High-Build Coating System
Description: KEY CONTAIN HIGH-BUILD COATING SYSTEM is a high-build epoxy novolac coating system designed to provide excellent chemical resistance in a seamless floor-to-wall-to-ceiling surface...

Manufacturer: Key Resin Company

Category: floor coatings | masonry coatings | traffic coatings...

MasterFormat: Cast In Place Concrete | Resinous Flooring | Special Wall Surfacing...


CertainTeed Commercial Roofing - FlintPatch®
CertainTeed Commercial Roofing - FlintPatch®
Description: CertainTeed FlintPatch® Wet/Dry Rubberized Flashing Cement is a high-performance flashing cement specially formulated for the professional roofer.

Manufacturer: CertainTeed Commercial Roofing

Category: fillers | hole fillers | roofing coatings...

MasterFormat: Cast In Place Concrete | Concrete Finishing | Painting and Coating...


GAF - StreetBond® SB150 Pavement Coating
GAF - StreetBond® SB150 Pavement Coating
Description: Developed for use over imprinted or flat asphalt, StreetBond ® SB150 Pavement Coating bonds permanently to asphalt surfaces to provide both an enduring, aesthetic finish and a low- maintenance surface that helps protect and extend the life of the pavement. Apply to crosswalks, parking lots,...

Manufacturer: GAF

Category: asphalt sealers | flexible paving surface treatment | pavement coatings...

MasterFormat: Cast In Place Concrete | Concrete Finishing | Painting and Coating...


TEC® - LiquiDam™ Penetrating Moisture Vapor Barrier
TEC® - LiquiDam™ Penetrating Moisture Vapor Barrier
Description: Formulated to be applied to damp or new concrete, as little as 48 hours old with a moisture vapor emission rate (MVER) less than or equal to 25 lbs. per 1000 ft² per 24 hours or a maximum...

Manufacturer: TEC®

Category: bond coats | concrete paints | special coatings...

MasterFormat: Cast In Place Concrete | Concrete Finishing | Flooring...


Right Pointe, LLC - Right Clean - Concrete Cleaner And Degreaser
Right Pointe, LLC - Right Clean - Concrete Cleaner And Degreaser
Description: RIGHT CLEAN is a biodegradable concrete cleaner and degreaser. It is an environmentally friendly substitution for high VOC and/or flammable solvents.

Manufacturer: Right Pointe, LLC

Category: cleaners | concrete floors | degreasers...

MasterFormat: Cast In Place Concrete | Maintenance of Concrete | Common Work Results for Concrete...


Acoustical Surfaces, Inc. - Fire Retardants Inc. - Fire Retardant coatings and Treatments
Acoustical Surfaces, Inc. - Fire Retardants Inc. - Fire Retardant coatings and Treatments
Description: Fire Retardants Inc. - Fire Retardant coatings and Treatments INFORMATION SHEET Fire Retardants Inc. has assembled a comprehensive selection of fire retardant products for a wide...

Manufacturer: Acoustical Surfaces, Inc.

Category: concrete paints | high heat coatings | high heat paint...

MasterFormat: Cast In Place Concrete | Concrete Finishing | Painting...


Textured Coatings of America, Inc. - TEX•TURA® Interior / Exterior Textured Wall Coating
Textured Coatings of America, Inc. - TEX•TURA® Interior / Exterior Textured Wall Coating
Description: TEX•TURA® is a pigmented, textured seamless wall finish. It is used for new or renovation projects to provide a multicolor and texture coordinated wall finish. The system is designed for...

Hacker Industries, Inc. - FIRM-FILL® High Strength Gypsum Concrete Floor Underlayment
Hacker Industries, Inc. - FIRM-FILL® High Strength Gypsum Concrete Floor Underlayment
Description: FIRM-FILL® High Strength floor underlayment is the economical solution to correct concrete problems. It resurfaces any cracked or damaged concrete to better than new, providing surface...

Behr Process Corporation - BEHR PREMIUM Textured DECKOVER® No. 5005
Behr Process Corporation - BEHR PREMIUM Textured DECKOVER® No. 5005
Description: Bring new life to old wood and concrete surfaces with BEHR PREMIUM DECKOVER. This 100% acrylic formula conceals cracks and splinters up to 1/4", and creates a smooth, slip-resistant finish...

Manufacturer: Behr Process Corporation

Category: exterior coatings | exterior finishing | paint...

MasterFormat: Cast In Place Concrete | Flooring | Exterior Painting...


Bostik - D-250™ Moisture Vapor Barrier Coating
Bostik - D-250™ Moisture Vapor Barrier Coating
Description: Bostik D-250™ is a high performance, rapid drying, water-based, penetrating epoxy formulated to dramatically reduce moisture vapor transmission and surface alkalinity from substrates....

Manufacturer: Bostik

Category: antimicrobial coatings | base coats | moisture barriers...

MasterFormat: Cast In Place Concrete | Concrete Finishing | Flooring...


Maxxon Corporation - Commercial Topping® Ultimate Strength Floor Underlayment
Maxxon Corporation - Commercial Topping® Ultimate Strength Floor Underlayment
Description: Fast drying Commercial Topping ® pours from a featheredge to 3" (76 mm) in new construction or renovation projects.

Manufacturer: Maxxon Corporation

Category: flooring underlayment | subfloors | vinyl floor underlayments...

MasterFormat: Cast In Place Concrete | Cast Decks and Underlayment | Concrete Topping...


CHAPCO™ - CHAPCO DEFENDER EZ™ Moisture Vapor Barrier
CHAPCO™ - CHAPCO DEFENDER EZ™ Moisture Vapor Barrier
Description: Introducing this 1-part, highly-engineered polymeric emulsion moisture mitigation formula. It is formulated to be applied to damp or new concrete, as little as 48 hours old with a moisture vapor...

Manufacturer: CHAPCO™

Category: concrete | concrete floors | concrete installation...

MasterFormat: Cast In Place Concrete | Maintenance of Concrete | Common Work Results for Concrete...


Super-Krete Products - S-9304 Micro-Bond™ Gray
Super-Krete Products - S-9304 Micro-Bond™ Gray
Description: Super-Krete S-9304 and S-9306 Micro-Bond are made especially for micro-topping. This cementitious product contains extremely fine sands to create a smoother finish.

Foster™ - Foster® 30-90 VAPOR-SAFE® Mastic
Foster™ - Foster® 30-90 VAPOR-SAFE® Mastic
Description: FOSTER VAPOR-SAFE ® MASTIC FOSTER VAPOR-SAFE MASTIC is a high solids water based, fire resistive, flexible vapor barrier finish for most types of thermal insulation, including polystyrene...

Manufacturer: Foster™

Category: exterior finishes | high-performance coatings | insulation...

MasterFormat: Cast In Place Concrete | Fire-Retardant Coatings | HVAC Insulation...


Momentive Performance Materials - SilShield* 2400 Coating
Momentive Performance Materials - SilShield* 2400 Coating
Description: Surround your building with long-lasting protection. Explore boundless opportunities to integrate color into your design.

Parabond - Vitex M-600 Multi-Purpose Patch & Underlayment
Parabond - Vitex M-600 Multi-Purpose Patch & Underlayment
Description: M-600 is a polymer-modified, cementitious patching compound formulated to be mixed with water or latex additive. It is quick setting (20-30 minutes), fast drying (normally one hour) and will not...

Xypex Chemical Corporation - Xypex Admix C-2000/C-2000 NF Crystalline Waterproofing Additive
Xypex Chemical Corporation - Xypex Admix C-2000/C-2000 NF Crystalline Waterproofing Additive
Description: Xypex Admix is blended into the concrete mix at the time of batching to waterproof and protect concrete from the start. It outperforms other methods because of its unique ability to become a...

Urethane Polymers International, Inc. - URADEK Urethane System #65-S
Urethane Polymers International, Inc. - URADEK Urethane System #65-S
Description: These durable, abrasion resistant urethane pedestrian waterproofing systems are designed to provide protection against moisture penetration and to prevent concrete slabs from spalling during...

Davis Colors - True Tone™ Sweet 16™ Mortar Colors
Davis Colors - True Tone™ Sweet 16™ Mortar Colors
Description: True Tone™ Sweet 16™ colors turn ordinary mortar into 64 exciting shades. With such a large selection, your imagination can really take off. Mortar colors enhance the beauty of...

Manufacturer: Davis Colors

Category: Portland cement mortar | admixtures | mortar admixtures...

MasterFormat: Cast In Place Concrete | Concrete Finishing | Colored Concrete Finishing...