Performance Coatings - High

Below you will find links to company and product information for manufacturers and suppliers listed in the High section of Sweets... more


852 Products
Results per page:

Benjamin Moore & Co - Epoxy Patch Kit - (V165) - USA
Benjamin Moore & Co - Epoxy Patch Kit - (V165) - USA
Description: Epoxy Patch Kit is a 100% solids epoxy co-polymer matrix for repairing and patching interior concrete floors. It sets rapidly with extremely high initial strength and is ready for foot traffic in...

The Sherwin-Williams Company - Pro Industrial Multi-Surface Acrylic
The Sherwin-Williams Company - Pro Industrial Multi-Surface Acrylic
Description: Pro Industrial™ Multi-Surface Acrylic is specifically engineered to provide high hide and good stain resistance.

Johns Manville Roofing Systems - Asphalt Primer
Johns Manville Roofing Systems - Asphalt Primer
Description: Johns Manville Asphalt Primer is a specification grade, penetrating priming solution of selected asphalt base in petroleum solvent.

W.R. Meadows - CEM-KOTE FLEX ST - Flexible Cementitious Waterproofing
W.R. Meadows - CEM-KOTE FLEX ST - Flexible Cementitious Waterproofing
Description: CEM-KOTE FLEX ST is a highly flexible, fiber-reinforced, breathable, cementitious slurry, consisting of dry Component A and liquid Component B.

Rust-Oleum Corporation - Seal-Krete Metallic Systems
Rust-Oleum Corporation - Seal-Krete Metallic Systems
Description: If you’re looking to provide your customers with a dose of drama in any space, Seal-Krete Metallic Systems will be the answer

CENTRIA International - Allura™ Coating System
CENTRIA International - Allura™ Coating System
Description: CENTRIA’s Allura Coating System is a premium, field-proven fluoropolymer coating featuring a matte, low-gloss finish combined with a subtle aggregate texture. The Allura Coating System is...

CENTRIA - Allusion Print Coat System - Non-Directional
CENTRIA - Allusion Print Coat System - Non-Directional
Description: Allusion Coatings accurately simulate expensive natural finishes, including wood and specialty metals, using high performance print coating technology.

LATICRETE International, Inc. - L&M™ AQUAPEL™/AQUAPEL PLUS™ Water Repellent
LATICRETE International, Inc. - L&M™ AQUAPEL™/AQUAPEL PLUS™ Water Repellent
Description: L&M™ AQUAPEL™ is a new generation, 100% reactive, waterborne silane-siloxane sealer. This clear, penetrating, breathable water repellent is ideal for use on interior and exterior...

Johns Manville Insulation Systems - Intumescent Coatings
Johns Manville Insulation Systems - Intumescent Coatings
Description: Johns Manville Intumescent Coatings are for application over spray-foam insulations to reduce heat transfer and surface burning in the event of a fire.

Five Star Products, Inc. - Rapid Surface Repair PF-60
Five Star Products, Inc. - Rapid Surface Repair PF-60
Description: Five Star® Rapid Surface Repair PF-60 is a unique, low viscosity, two-part liquid, polyurethane-hybrid polymer. When supplemented with aggregates, this product is used to repair and...

Key Resin Company - Key Contain High-Build Coating System
Key Resin Company - Key Contain High-Build Coating System
Description: KEY CONTAIN HIGH-BUILD COATING SYSTEM is a high-build epoxy novolac coating system designed to provide excellent chemical resistance in a seamless floor-to-wall-to-ceiling surface...

CertainTeed Commercial Roofing - FlintCoat® -A 150
CertainTeed Commercial Roofing - FlintCoat® -A 150
Description: CertainTeed FlintCoat® -A 150 Fibered Aluminum Roof Coating is a quality, professional grade reflective coating formulated to provide a bright and long lasting finish. The aluminum pigment...

GAF - StreetBond® SB150 Pavement Coating
GAF - StreetBond® SB150 Pavement Coating
Description: Developed for use over imprinted or flat asphalt, StreetBond ® SB150 Pavement Coating bonds permanently to asphalt surfaces to provide both an enduring, aesthetic finish and a low- maintenance surface that helps protect and extend the life of the pavement. Apply to crosswalks, parking lots,...

TEC® - LiquiDam™ Penetrating Moisture Vapor Barrier
TEC® - LiquiDam™ Penetrating Moisture Vapor Barrier
Description: Formulated to be applied to damp or new concrete, as little as 48 hours old with a moisture vapor emission rate (MVER) less than or equal to 25 lbs. per 1000 ft² per 24 hours or a maximum...

Manufacturer: TEC®

Category: base coats | bond coatings | high-performance coatings...

MasterFormat: High | Cast-In-Place Concrete | Water Repellents...


Right Pointe, LLC - Right Finish - Cement Based Coating
Right Pointe, LLC - Right Finish - Cement Based Coating
Description: RIGHT FINISH is a polymer modified cement based coating designed to enhance the finished appearance of precast, tilt up and other unfinished concrete surfaces. USE AND...

Manufacturer: Right Pointe, LLC

Category: cementitious coatings | finishes | pipe coatings...

MasterFormat: High | Flooring | Painting and Coating...


RectorSeal - Metacaulk® Industrial Cable Coating
RectorSeal - Metacaulk® Industrial Cable Coating
Description: Metacaulk® Firestop Sealants Safety Data Sheet: / Metacaulk® Industrial Cable Coating is a heavy duty, acrylic latex based coating used to prevent flame...

Textured Coatings of America, Inc. - COOLWALL® Heat Reflective Wall Coating System
Textured Coatings of America, Inc. - COOLWALL® Heat Reflective Wall Coating System
Description: The COOLWALL® SUPER • COTE™ system is a superior heat reflective water based exterior coating. This highly breathable system has been formulated for superior salt spray, moisture,...

Acoustical Surfaces, Inc. - Coat of Silence Sound Reducing Paint System
Acoustical Surfaces, Inc. - Coat of Silence Sound Reducing Paint System
Description: Coat of Silence Sound Reducing Paint System Coat of Silence ™ Spray-On Sound Reducing Coating Introducing Coat of Silence – the easy to use, spray on coating for all your...

Behr Process Corporation - BEHR PREMIUM Textured DECKOVER® No. 5005
Behr Process Corporation - BEHR PREMIUM Textured DECKOVER® No. 5005
Description: Bring new life to old wood and concrete surfaces with BEHR PREMIUM DECKOVER. This 100% acrylic formula conceals cracks and splinters up to 1/4", and creates a smooth, slip-resistant finish...

Bostik - D-250™ Moisture Vapor Barrier Coating
Bostik - D-250™ Moisture Vapor Barrier Coating
Description: Bostik D-250™ is a high performance, rapid drying, water-based, penetrating epoxy formulated to dramatically reduce moisture vapor transmission and surface alkalinity from substrates....

Manufacturer: Bostik

Category: bond coatings | fungicide coatings | primers...

MasterFormat: High | Cast-In-Place Concrete | Painting and Coating...


Maxxon Corporation - Maxxon® MVP (Moisture Vapor Protection)
Maxxon Corporation - Maxxon® MVP (Moisture Vapor Protection)
Description: Maxxon® MVP (Moisture Vapor Protection) is a unique 2-component, moisture tolerant, high density, chemically enhanced epoxy product which prevents the passage of water vapor...

CHAPCO™ - CHAPCO® 777 Liquid Latex Sealer
CHAPCO™ - CHAPCO® 777 Liquid Latex Sealer
Description: This liquid latex floor sealer provides enhanced adhesion and creates a suitable substrate for a variety of floor coverings, including CAN Powerbond products. Packaging : 1 gallon pail...

Foster™ - Foster® 30-33 Vapor-Out™ Coating
Foster™ - Foster® 30-33 Vapor-Out™ Coating
Description: FOSTER FIRE RESISTIVE ANTI-ABRASION COATING WATER BASED FOSTER Fire Resistive Anti-Abrasion Coating is a high solids, water based fire resistive bore coating for the inner surfaces of cellular...

Super-Krete Products - S-9304 Micro-Bond™ Gray
Super-Krete Products - S-9304 Micro-Bond™ Gray
Description: Super-Krete S-9304 and S-9306 Micro-Bond are made especially for micro-topping. This cementitious product contains extremely fine sands to create a smoother finish.

Momentive Performance Materials - Elemax* 2600 AWB
Momentive Performance Materials - Elemax* 2600 AWB
Description: Elemax* 2600 AWB can deliver seamless, long-lasting protection for your building envelope.