Home / Maxxon® Corporation / Moisture Mitigation

Maxxon® Corporation -MVP One Primer

DOWNLOADS

Maxxon® Commercial MVP One Primer is a ready-to-use, zero VOC moisture barrier and primer. When applied to concrete substrates, Maxxon® Commercial MVP One Primer addresses moisture-related issues (high MVER, RH, and pH) and primes the surface for an underlayment or patch.


Category: floor vapor barriers | moisture vapor reducers | zero V.O.C. coatings...

MasterFormat: Maintenance of Concrete | Cast-In-Place Concrete | Painting and Coating...


View Product Details From Manufacturer


Maxxon® Corporation
P.O. Box 253
920 Hamel Road
Hamel, MN 55340
Tel: (800) 356-7887
Fax: (763) 478-2431

info@maxxon.com

http://www.maxxon.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


MVP One Primer

Maxxon® Commercial MVP One Primer is a ready-to-use, zero VOC moisture barrier and primer. When applied to concrete substrates, Maxxon® Commercial MVP One Primer addresses moisture-related issues (high MVER, RH, and pH) and primes the surface for an underlayment or patch. It has a typical re-coat time of less than one hour, allowing for rapid turnaround on fast-track projects.

Product Advantages:

  • Zero VOC, water-based and non-toxic
  • Up to 100% RH, 25 lbs. MVER, and pH of 14
  • Easy application: No minimum CSP requirement, apply to porous surface
  • Ready-to-use product applied with roller
  • Quick drying - underlayment or patch can be installed in 30-60 minutes after second coat
  • Less than 0.1 perm rating as required by ASTM F3010, meets or exceeds E96
  • Cost effective


See More


Specifications

Technical Data:
% Solid:25%
VOCs:0 g/l
Application Rate:2 coats yield 250 sf/gallon
An aggressively profiled substrate may reduce yield per gallon.
Color:Milky White, dries clear
Dry Time:30-60 min per coat
Installation Temperature:45°F - 100°F
Concrete Surface Temperature:min 40°F
Packaging:5-gallon pail
Total Coverage:1250 sf
Shelf Life:12 months unopened
Storage Conditions:65 - 90 °F

All data are average values obtained under laboratory conditions. In practical use temperature, humidity and absorbence of the substrate may influence the above given values.