1602 Parking Control Barrier Gate Operator

Traffic Control Barrier Options That Fit Any Application

The 1602 operator is designed for traffic lanes up to 27-feet wide in low use commercial and industrial applications. This operator uses a counter-balanced three-piece wishbone style arm assembly. The 1602 operator is designed so that it can be mounted on either the left or right-hand side of the roadway. LED/Reverse edge light kits are available for the Octagonal arms only. The operator can be equipped with a DC convenience open package (optional) that will automatically raise the arm in the event of a power outage.

Perimeter Access Management System

Automatic sequencing inputs for use with Slide and Swing Gate Operators.

Massive Lanes

Designed to control wide traffic lanes in limited use applications such as industrial sites and loading dock areas -27 feet maximum

WARN Beeper / Operate Beeper

Beeper will beep 2 times before lowering arm ONLY when the TIMER times out. If using a down loop, when it gets activated, it will cancel the timer and lower arm WITHOUT beeping.
Beeper will beep 2 times before lowering arm EVERYTIME.

Octagonal Lighted Signal Arm

Light the way for customers to exit easily and safely with signals and sensors.

Wishbone Style Joint and Cable Tensioners

Allows Arms up to 27 ft (8.2 m) in length.

DKS Pedestrian Protection System

It’s aware - even when they’re not.

Left or Right Hand Mount

Operators are designed so they can be mounted on either the left or right hand side of the roadway.

Specifications

• 1 HP continuous-duty motor.
• 60:1 gear-box running in a continuous oil bath.
• 115, 230*, 460* VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
• Arm rotates 90° in approximately 5.5 seconds.
• Class III and IV applications.
• Compliant with UL 325 and 991. ETL Listed.

  (Note: To be compliant with UL 325 and industry safety guidelines, entrapment protection devices need to be installed with this gate operator.

  Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
• Dimensions (operator only): 15.25″W x 39.75″H x 15.75″D.

Options

• Aluminum Round Wishbone Arms: 20 Feet, 24 Feet, 27 Feet
• Aluminum Octagonal Wishbone Arms: 20 Feet, 24 Feet, 27 Feet
• Aluminum Octagonal Single Arms: 17 Feet
• LED/Reverse edge light kits (Octagonal arms only)
• 20-Foot Wood Arm (requires 1602-041 kit)
• DKS Pedestrian Protection System
• Plug-in loop detectors.
• DC powered convenience open.
• Heater kit.
• Fan kit.
• Surge suppressors.
• Manual Crank kit (factory installed option only).

Mechanical

• Magnetic limit control.
• Ports for plug-in loop detectors.
• Automatic sequencing inputs for use with slide and swing gate operators.
• Up input memory buffer.
• Down memory option.
• Multiple up commands.
• Two convenience outlets.
• Gate tracker reporting output.
• Programming switches.
• Built-in power On/Off switch.
• Left or right hand mount.

See More

See Less