Metal-Era, LLC -One Drip Edge PVC Skirted

DOWNLOADS

One Drip Edge PVC Skirted is a factory-fabricated coated metal edge system used to terminate at the perimeter of a PVC. This edge comes with a factory applied, wide PVC flashing strip to help save labor installation costs in the field.


Category: drip edges | roof accessories | shingle roof accessories...

MasterFormat: Maintenance of Steep Slope Roofing | Roof and Wall Specialties and Accessories | Manufactured Gravel Stops and Fasciae...



Metal-Era, LLC
1600 Airport Road
Waukesha, WI 53188
Tel: (800) 558-2162
Fax: (800) 373-9156

info@metalera.com

https://www.metalera.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


One Drip Edge PVC Skirted

One Drip Edge PVC Skirted is a factory-fabricated coated metal edge system used to terminate at the perimeter of a PVC. This edge comes with a factory applied, wide PVC flashing strip to help save labor installation costs in the field. One Drip Edge PVC Skirted with custom face sizes available is an economical solution for many conditions such as continuous edge drainage with or without a gutter condition.

Features and Benefits

Warranty

The 10-Year, 90 MPH Wind Warranty is available on orders to meet a project's specification. It provides a maximum of 10 years, 90 MPH coverage for the repair or replacement of any portion of the roof edge system that has failed due to a defect in Metal-Era supplied materials.

Testing

  • Tested per ANSI/SPRI/FM 4435/ES-1 Standard to comply with the International Building Code.
  • Factory Mutual approved for wind uplift protection.

Standard Sizes

Sizes range from 4 ½" up to 6" face heights to accommodate multiple nailers and coverage requirements.

  • 4 ½"
  • 6"

Accessories

Factory fabricated miters provide a cleaner, more aesthetically pleasing appearance. This eliminates the need for field fabrication, providing time and labor savings.

Also Included

22 Ga. galvanized continuous cleats with slotted holes are included and will arrive to the job site with the product.

Available Materials

24 Ga. Drip Edge and Factory Applied membrane flashing

Competitively Priced

Ensures compatibility with roof membrane and system warranties

Efficient Design

Provided in 12'-0" lengths with pre-punched holes and factory heat welded membrane flashing for quicker installation and lower labor costs. The fastening holes are slotted to allow for proper thermal movement of the materials and ensure correct fastener placement and spacing.

Factory-applied membrane flashing saves time - product is delivered with membrane flashing attached/heat welded to drip edge.


See More


Sweetsstakes