Airex Manufacturing Inc. -Titan Outletâ„¢ - HVAC Pipe Penetration Wall Seal

DOWNLOADS

The Titan Outlet is the engineered solution of wall sealing refrigerant line penetrations featuring a weather and air leakage resistant, vibration control, rodent proofing, wall enclosure system, and has become the preferred industry leader.


Category: flashings | pipe penetration seals | seals...

MasterFormat: Roof and Wall Specialties and Accessories | Wall Specialties | Joint Protection...



Airex Manufacturing Inc.
72170 Dunham Way
Suite D
Thousand Palms, CA 92276
Tel: (760) 343-2277
Fax: (760) 343-5599

customerservice@airexmfg.com

http://www.airexmfg.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Titan Outlet™ - HVAC Pipe Penetration Wall Seal

Product Summary

The Titan Outlet is the engineered solution of wall sealing refrigerant line penetrations featuring a weather and air leakage resistant, vibration control, rodent proofing, wall enclosure system, and has become the preferred industry leader.

Air Leakage Wall Seal, Protect Indoor Air Quality!
  • Meets mandatory Building Codes, Energy, Residential, Mechanical, and Green Codes
  • Made in The USA
  • Superior durable quality with UV/resistance and high impact strength design
  • Gasket Compression System Seals Wall Air Leakage and Weather Moisture Wall Damage
  • Flexible elastomeric outlet sleeve design offers, anti-wind, anti-rodent features
  • Design supports HVAC systems with wall isolation & anti-vibration features
  • Flexible Sleeve Reduces Piping Vibration and Noise
Product Description

AIREX TITAN OUTLET - Professionally Engineered and with an Architectural aesthetic finish design, features a Wall Outlet Enclosure with excellent weather proofing capabilities that fits over and seals around wall surface piping penetrations, utilizing elastomeric gaskets and seals, as required by building, energy, and mechanical codes. AIREX TITAN OUTLET prevents wall gaps and exterior surface cracks associated with the use of rigid wall penetration sleeves or rigid penetration flashing materials. Featuring a combined fastener and gasket/seal applied compression-force system that accomplishes simultaneous, solid, internal wall structure attachment and all-surface wall gasket mounting for long-term sustainable and effective air leakage sealing.

An integral over-molded Flexible Elastomeric Sleeve, seals the refrigerant piping and insulation, creating an air leakage seal, that permanently supports the refrigerant piping at the point of equipment service areas, professionally engineered and with an architectural aesthetic finish design. The sleeve also features a designated region to accommodate a stainless-steel clamp that mechanically grips both refrigerant piping and piping insulation, mechanically securing against vibration, rodents, insects, and pipe insulation protection for outdoor usage.

Wall Surface Applications

Brick
Concrete
Masonry
Metal Paneling
Siding
Stone
Stucco
Drywall

Approved Product & Material Testing
  • ASTM E283 - Standard Test Method for Air Leakage
  • ASTM E331 - Standard Test Method for Water Penetration
  • ASTM D1525C-09 - Temperature Deformation Test
  • ASTM D648-07 - Temperature Load Deformation Test
  • ASTM D412 - Tension Deformation Test (UV Exposure & Water Immersion)
  • UL 94 HB - Flammability Test
  • UL 746C - Outdoor Suitability - f1 Rating
  • ASTM D573-04 - Deterioration Test
  • ASTM D746-07 - Brittleness Temperature Impact Test
Codes & Standards Compliance
  • IBC - 2006, 2009, 2012 Chapter 13
  • IRC - 2006, 2009, 2012 Chapter 11 Part IV Energy Efficiency - Section N1101 General - N1101.1 Scope - Air Leakage Section N1102.4 Section N1102.4.1 - Building Thermal Envelope - (1. All joints, seams, penetrations) Chapter 11 Refrigeration Section 1101.0 Scope -1101.3 Protection
  • IECC - 2006, 2009, & 2012 Air Leakage (Mandatory) - Residential Section 402.4.1 and 402.4.1.1 Building Thermal Envelope - Penetrations
  • IECC - 2006, 2009, & 2012 Air Leakage (Mandatory) - Commercial Section C402.4.3 and C402.4.2 Building Thermal Envelope - Penetrations
  • IMC - 2006, 2009, & 2012 Chapter 3 General Regulations Section 301.1 Scope - Sections 301.10, 301.11, 301.14, 301.15, 305.1, 305.2, 305.4
  • UMC - 2006, 2009, & 2012 Chapter 11 Refrigeration - Section 1101.0 Scope - Section 1101.1 - General Requirements Section 1106.0 - Section 1106.2, Section 1111.0 Erection of Refrigerant Piping - Sections 1111.1, 1111.2, 1111.4
  • California Building Energy Standards (Title 24) - 2013 Air Leakage (Mandatory) - All Occupancies Section 117 Joints and other Openings/Exterior Wall Penetrations


See More


Specifications

Weather and Physical Damage Protection
TGS Series
Model #ColorProduct Description
TGS-550-G GrayAIREX TITAN OUTLET Fits: 1/2" wall thickness pipe insulation with 5/8", 3/4", 7/8" tube
TGS-575-GGrayAIREX TITAN OUTLET Fits: 3/4" wall thickness pipe insulation with 5/8", 3/4", 7/8" tube or 1/2" wall thickness pipe insulation with 1-1/8" tube
TGS-510-GGrayAIREX TITAN OUTLET Fits: 1" wall thickness pipe insulation with 3/4", 7/8" tube or 3/4" wall thickness pipe insulation with 1-1/8" tube
Model #ColorProduct Description
TGS-550-WWhiteAIREX TITAN OUTLET Fits: 1/2" wall thickness pipe insulation with 5/8", 3/4", 7/8" tube
TGS-575-WWhiteAIREX TITAN OUTLET Fits: 3/4" wall thickness pipe insulation with 5/8", 3/4", 7/8" tube or 1/2" wall thickness pipe insulation with 1-1/8" tube
TGS-510-WWhiteAIREX TITAN OUTLET Fits: 1" wall thickness pipe insulation with 3/4", 7/8" tube or 3/4" wall thickness pipe insulation with 1-1/8" tube
TSS Series
Model #ColorProduct Description
TSS-550-GGrayAIREX TITAN OUTLET Fits: 1/2" wall thickness pipe insulation with 5/8", 3/4", 7/8" tube (for siding)
TSS-575-GGrayAIREX TITAN OUTLET Fits: 3/4" wall thickness pipe insulation with 5/8", 3/4", 7/8" tube or 3/4" wall thickness pipe insulation with 1-1/8" tube (for siding)
Model #ColorProduct Description
TSS-550-WWhiteAIREX TITAN OUTLET Fits: 1/2" wall thickness pipe insulation with 5/8", 3/4", 7/8" tube (for siding)
TSS-575-WWhiteAIREX TITAN OUTLET Fits: 3/4" wall thickness pipe insulation with 5/8", 3/4", 7/8" tube or 1/2" wall thickness pipe insulation with 1-1/8" tube (for siding)
Sweetsstakes