Wooster Products, Inc. -Extruded Aluminum Products - Stairmaster® Safety Renovation Treads

DOWNLOADS

STAIRMASTER® Treads Provide…

A heat-treated, corrosion resistant, extruded aluminum base with satin/lacquered finish. The use of diamond-hard aluminum oxide in the filler assures long tread life under heavy pedestrian traffic.


Category: aluminum stair treads | aluminum treads | anti-slip stair treads...

MasterFormat: Metal Fabrications | Metal Stair Treads and Nosings | Metal Stair Treads



Wooster Products, Inc.
P.O. Box 6005
1000 Spruce Street
Wooster, OH 44691
Tel: (800) 321-4936
Fax: (330) 262-4151

sales@wooster-products.com

http://www.woosterproducts.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Extruded Aluminum Products - Stairmaster® Safety Renovation Treads

STAIRMASTER® Treads Provide…

A heat-treated, corrosion resistant, extruded aluminum base with satin/lacquered finish. The use of diamond-hard aluminum oxide in the filler assures long tread life under heavy pedestrian traffic. Designed for inside or outside use. They are designed for the modernization and restoration of all types of stairs, while also providing excellent anti-slip protection.

Specify Stairmaster® for:
Heavy Pedestrian Traffic
Indoor or Outdoor Use
Excellent Safety Protection
For Existing Stairs
Non-combustible

Two-tone treads with contrasting color available.
Wooster Products Leveling Compound is available to fill/level worn steps before installing Stairmaster® treads.
Use construction adhesive in addition to mechanical fasteners for the best installation results.
Special tread sealer available for wood or saltwater applications.
Most styles available up to 12’0″ in one section.
Drilled and countersunk holes are standard unless otherwise specified. Beveled ends, countersunk holes and tapcon screws are standard, unless specified.


See More


Specifications

Coverage of treads
Type 500 - width 9″ - nose 1 1/8″.
Two-tone available at additional cost
Type 511 - width 11″ - nose 1 1/8″.
Two-tone available at additional cost
Type 500SN - width 9″ - nose 1 1/8″.
Two-tone available at additional cost
Type 511SN - width 11″ - nose 1 1/8″.
Two-tone available at additional cost
Type 500-NG - 9″ wide (1 1/8″ glow) - 1 1/8″ nose
Maximum piece length is 8’0″
Coverage of landings
Full or partial coverage can be provided on landings. Use treads below to cover depths greater than 11 inches.
Type 162 - width 6″ - nose 1 1/8″.
Two-tone available at additional cost
Type 182 - width 8″ - nose 1 1/8″.
Two-tone available at additional cost
Type 630 - width 3″
Type 660 - width 6″
Type 6100 - width 10″
Type 540 - width 4″ (with beveled back)
Type 570 - width 7″ (with beveled back)