Wooster Products, Inc. -Abrasive Cast Structural Treads

DOWNLOADS

Wooster Products’ abrasive cast structural treads are cast to order from a large selection of architectural designs as shown. They are of highest quality and heavy duty construction in either ALUMOGRIT® (abrasive cast aluminum)


Category: aluminum treads | cast aluminum stair treads | metal treads...

MasterFormat: Metal Fabrications | Metal Stair Treads and Nosings | Metal Stair Treads...



Wooster Products, Inc.
P.O. Box 6005
1000 Spruce Street
Wooster, OH 44691
Tel: (800) 321-4936
Fax: (330) 262-4151

sales@wooster-products.com

http://www.woosterproducts.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Abrasive Cast Structural Treads

Wooster Products’ abrasive cast structural treads are cast to order from a large selection of architectural designs as shown. They are of highest quality and heavy duty construction in either ALUMOGRIT® (abrasive cast aluminum) or FERROGRIT® (abrasive cast iron).

Specify abrasive castings for:
Maximum Durability in Rough Use
Indoor or Outdoor Use
Resistance to Unusually Corrosive Environments
Anti-Slip Safety Properties
Ready to Install Convenience
New Construction or Existing Buildings

NOTE: Thicknesses are minimum for casting purposes and not always sufficient for structural strength. Where width exceeds 18″ maximum piece length will be 6’0″. Where width exceeds 38″ maximum piece length will be 5’0″. Color may vary from piece to piece for all metals. Cross-hatched, or flutes may not match when multiple sections are used.


See More


Specifications

Type 104 - Nose 1″ X 1″
Chief use: as structural treads with bent-plate risers or superimposed on existing steps.
Type 105 - Nose 1″ x 1 1/2″ - Toeplate 1″
Chief use: as structural treads. Nosing and toeplate can be drilled for attaching to flat plate risers, when specified.
Type 105A - Nose 1″ x 1 1/2″
Chief use: as structural treads or front of landing.
Type 105B - Nose 1″ x 1 1/2″ - Toeplate 1″
Chief use: as structural treads. Nosing and toeplate can be drilled for attaching flat plate risers, when specified.
Type 107 - Nose 3/4″ x 3/4″ - Toeplate 1″
Chief use: as structural treads. Nosing and toeplate can be drilled for attaching flat plate risers, when specified.
Type 107A - Nose 3/4″ x 3/4″ - Toeplate 1″
Chief use: as structural tread fastened to carrier angles or stringers
Type 106 - Nose 3/4″ x 3/4″
Double nose tread, reversible. End lugs provided for bolting treads directly to stringers.
Type 106A - Nose 3/4″ x 3/4″
Double nose tread, reversible. Chief use: as structural tread supported by carrier angles on stringers.
Type 117 - Nose 1 1/2″ standard
Double nose tread, reversible. Chief use: as structural tread fastened to carrier angles on stringers.
Type 117A - Nose 1 1/2″ standard
Double nose tread, reversible. Chief use: marine and industrial ladders. Treads bolt directly to stringer.