Model 700 Rolling Steel Fire Doors - FireStar®

Our FireStar^® Model 700 Rolling Steel Fire Doors provide a practical and innovative solution to safety and fire protection. FireStar^® doors can be drop-tested and reset at any time by anyone, thanks to a standard auto-reset feature. This rolling steel fire door features a forward-thinking design that outperforms industry standard fire doors in all areas, including auto-reset testing capability; smooth, quiet operation; and reliable, long-lasting performance.

The revolutionary FireStar^® design uses a patent-pending planetary gear on the drop-out mechanism ensuring years of reliable service and drop-out performance. Factory-tested and approved for a minimum of 20,000 cycles, the FireStar^® door can be used and tested on a regular basis without concerns of premature failure. Our rolling steel fire doors have been tested and approved to meet the requirements of well-known agencies, such as Underwriters Laboratories and Factory Mutual, and conform to NFPA Standard 80.

We incorporate one standardized component design for all FireStar^®* doors regardless of size, and utilize fewer parts than other models. This helps to ensure more accurate installations and reduces the possibility of potential service calls in the future.

*Doors up to 24’x24’

Features

Key Product Features

• Max Height: 24’ (7,315.2 mm)
  
• Max Width: 24’ (7,7315.2 mm)
  
• Max Square Foot: 324 sq. ft.
  
• Material: Galvanized or Stainless Steel
• Curtain: Interlocking roll-formed slats with alternate slats fitted with metal endlocks / windlocks
  
• Operation: Lift-up standard. Chain hoist included on sizes that require it
  
• Bottom Bar: Two equal angles, 0.121" min thickness, to stiffen curtain
  
• Brackets: Enclose ends of coil and provide support for counterbalance pipe at each end. Fabricate of steel plates with permanently sealed ball bearing
  
• Counter Balance: Curtain to be correctly balanced by helical springs, oil tempered torsion type. Cast iron barrel plugs will be used to anchor springs to tension shaft and pipe 20,000 cycle
  
• Hood: Minimum 24-gauge galvanized or stainless steel hood fabricated of sheet metal, flanged at top for attachment to header and flanged at bottom to provide lonitudinal stiffness
  
• Finish: Rust inhibitive primer or non-galvanized surfaces and operating mechanisms. Guides and brackets will be coated with a flat black prime paint.
  
• Operator Options: Chain Hoist with gear drive reduction, wall crank box, motor operation, motor operation with electrical sensing edge, motor operation with pneumatic sensing edge
  
• Release Mechanism: FireSTar release mechanism standard on doors up to 24' x 24'
  
• Mounting: Structural drive, drywall over wood stud jamb, drywall over 16-gauge steel stud jamb.
  

*Maximum height and maximum width are independent of each other and may vary based on slat profile, material and gauge.

FireStar Door Control Devices

Chain hoist, motor and crank operation

• Revolutionary fire door control device utilizing a patented planetary gear arrangement to disconnect the operator and drop the door in the event of a fire
• Easy drop test and reset a fire door without resetting spring tension and rerouting cables.

Lift up operation

• Revolutionary fire door control device utilizing a clutch plates and unique counterbalance technology to drop the door in the event of a fire.
  

Slat Profiles

No. 2 - Standard: Curved-faced single crown slat. Available: Up to 20-gauge steel Up to 20-gauge stainless steel Pitch: 1.9'
No. 4 - Standard: Curved-faced single crown slat. Available: Up to 18-gauge steel Up to 20-gauge stainless steel Pitch: 2.8'
No. 14 - Standard: Flat-faced slat. Available: Up to 18-gauge steel Up to 18-gauge stainless steel Pitch: 2.45'
No. 17 - Standard: Flat-faced slat. Available: Up to 20-gauge steel Up to 20-gauge stainless steel Pitch: 1.6'

Warranty: 2 year limited

Door Options

Options & Accessories

• Operator Options: Chain hoist with gear drive reduction; awning crank; motor operation with electrical or pneumatic sensing edge
• FM label option to include hood with steel baffle
• Wind load options available
  
• Viscous governor, if required by size of door
  
• 22-gauge hood
  

See More

See Less