Terra Universal -Pass-Through;CleanMount®CleanSeam ,30Wx30Dx30H ID,Flush Wall Mount,304 or 316 Stainless Steel

  • Available ISO Ratings: ISO 5, ISO 6, ISO 7, ISO 8
  • Easy-to-sterilize 304 or 316 stainless steel cleanroom pass through for sterile bio-pharma applications
  • Obstruction free interior, lipless edges, radius corners, continuous welds for strict disinfection

Category: 085000 | cleanroom equipment | laboratory equipment...

MasterFormat: Windows | Special Function Windows | Pass Windows...

Terra Universal
800 S. Raymond Ave.
Fullerton, CA 92831
Tel: (714) 578-6100
Fax: (714) 578-6020



Find a rep/distributor

Request More Info


Related Products


Pass-Through;CleanMount®CleanSeam ,30Wx30Dx30H ID,Flush Wall Mount,304 or 316 Stainless Steel

  • Available ISO Ratings: ISO 5, ISO 6, ISO 7, ISO 8
  • Easy-to-sterilize 304 or 316 stainless steel cleanroom pass through for sterile bio-pharma applications
  • Obstruction free interior, lipless edges, radius corners, continuous welds for strict disinfection
  • CleanMount design allows for installation without drilling and prevents cleanroom shutdown for rapid servicing or replacement
  • Hidden automatic door interlock allows only one door to open at a time to prevent cross-contamination
  • Lift-off hinges allow doors to be easily removed for more thorough cleaning
  • Cleanroom pass throughs reduce foot traffic, improve cleanliness, safety, productivity, and much more.
  • Chamber Design:
  • All 304 or 316 stainless steel surfaces with enhanced corrosion resistance stand up to harsher cleaning agents and withstand degradation from bleach-based disinfectants.
  • Continuous welds with coved radius corners and lip-less edges eliminate hard-to-clean cracks and crevices where contaminants can collect.
  • Double-wall construction greatly increases rigidity and durability of the pass through chamber to facilitate installation and prevent warping on larger chambers.
  • Flush-mount design removes dust accumulating surfaces inside the cleanroom.
  • Optional dual BioSafe® stainless steel racks easily remove for cleaning or sterilizing and are reversible to allow slide-out motion in either direction.
  • Quick and Clean Installation:
  • Innovative fastening system clamps to a variety of wall thicknesses without penetrating or damaging the finished surrounding wall.
  • The mounting frame is covered on both sides for an easy-to-clean finish with no visible fasteners or screws.
  • Easy-to-install mounting system also allows the entire passthrough chamber to be seamlessly removed and reinstalled within minutes, without damaging the surrounding wall.
  • Hidden Automatic Door Interlock:
  • Hidden Interlock mechanism is mounted outside the transfer chamber (between double-wall) for easy-to-clean obstruction-free chamber interior.
  • Rugged and reliable CleanMount® mechanical interlock uses rigid stainless steel rods that run through the door and firmly lock into the lift latches.
  • Door Design:
  • Access doors with 304 or 316 stainless steel reinforced frames extend passthrough chamber's service life and provide a tight seal.
  • Santoprene® “e”-shape non-outgassing rubber gasket firmly compresses to eliminate leaks. The one-piece resilient rubber gasket maintains its shape after compression and won't flatten, warp, crack, or degrade like ordinary foam gasket. Gasket is also mechanically attached to the door frame to avoid adhesive failure common with gasket tapes.
  • Doors are leak-rated by UL for tight seal to maintain cleanroom pressure gradients.
  • Heavy-duty stainless steel lift latches minimize scratching, corrosion and contamination resulting over time that can occur with chrome-plated latches.
  • Sturdy "lift-off" stainless steel hinges are welded to the door frame and chamber. They are detachable to allow doors to easily lift off for more thorough cleaning/decontamination or trouble-free replacement.
  • Order replacement door(s) to avoid critical operation delays should a door be damaged and require immediate replacement.
  • Includes:
  • (1) Automatic mechanical interlock.
  • Mounting bracket system with cover plates. Standard mounting system accommodates 4”-6” wall thickness. Specify wall thickness at time of order.
  • Standard sized sloping top included for optional use on dirty side of pass-through. Accommodates wall thickness up to 5-1/2". If slope top is required for greater wall thickness, custom slope top to be ordered separately. Can be installed onto existing pass-through units.
  • Inside Depth: 30"
  • Inside Height: 30"
  • Inside Width: 30"
  • Concealed Interlock: Yes
  • Continuous-Seam Welds: Yes
  • Electropolished: Optional
  • Expand System Capabilities: UV Sanitizer, Electronic Pass-Through Upgrade, LED Lighting, Access Control System, Automatic Door, ULPA Air Shower, Intercom, Iris Scanner, Keycard Reader, Fingerprint Scanner, Video Recording, Power Outlet, Load Presence Sensor, Message Panel, Air Speed Sensor, Access Panel
  • HEPA/ULPA Filtration: No
  • Material: 304 or 316 Stainless Steel
  • Model: CleanMount® CleanSeam™
  • Mounting Position: Flush Wall
  • Special Door Configuration: Leak-Rated
  • Storage Racks: Optional
  • Window Material: PVC
  • Unit of Measure: EA
  • Dimensions, Product: 40.5" W x 31" D x 47.21" H
  • Dimensions, Shipping: 46.5" W x 34.75" D x 59.09" H
  • Marks & Listings: CE, UL, ULC
  • Package Type: Crate
  • Weight, Product: 140.2 lb
  • Weight, Shipping: 372.7 lb
Features and Benefits Retrofittable on Existing Units

Slope tops for double wall pass-throughs can be installed onto new or existing units. Designed for rapid installation without penetrating the chamber. Now comes standard on certain models

Products Compliant With Your ISO Rating

Provide Terra with your desired ISO rating. We will tailor the product to meet your rating and supply a certificate of compliance appended to your invoice, to be included in your compliance package. All certificates are archived in Terra's system for quick retrieval.

See More