Super-Krete Products - SK-P5000 - Polyaspartic & Polyurea

DOWNLOADS

SK-P5000 is a two-component, ultra-high solids, aliphatic polyurea/polyaspartic hybrid.


Category: industrial coatings | polyurea coating | roller-applied coatings...

MasterFormat: Cast-In-Place Concrete | Concrete Finishing | Dampproofing and Waterproofing...



Super-Krete Products
2705 Via Orange Way
Suite B
Spring Valley, CA 91978
Tel: (800) 995-1716
Fax: (619) 401-8288

info@super-krete.com

http://www.super-krete.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


SK-P5000 - Polyaspartic & Polyurea

SK-P5000 is a two-component, ultra-high solids, aliphatic polyurea/polyaspartic hybrid. New, unique resin chemistry has provided the raw materials to formulate this coating, which gives it the desirable properties of polyester-polyurethane materials with greatly reduced odor and less film thickness limitations. SK-P5000 is a low viscosity, easy-to-handle product with a very high gloss finish. It’s also hard and abrasion resistant. This material releases soils easily and has excellent resistance to a broad range of chemicals. Unlike conventional polyurea materials, SK-P5000 has enough work time to be applied by brush and roller. SK-P5000 is available in both a regular cure and a fast cure (FC) for use in rapid turnaround projects. SK-P5000 FC can handle vehicle traffic 24 to 48 hours after application, depending on the temperature. It is also available with a UV absorber package, which should be purchased separately and added to the product when used with exterior applications. The fast cure material may be used at temperatures as low as 20ºF. SK-P5000 was developed as a high-performance topcoat in various protective coatings and seamless flooring applications. Because of its low-solvent content, it may be applied heavier in one coat than conventional solvent or water-based polyurethanes. Applications that require two or more topcoats can now be applied in a single application - saving both time and money. SK-P5000 is ideally suited for use as a finish coat in color chip and color quartz flooring, automotive repair facilities, aircraft hangars, clean rooms and various types of decorative architectural concrete applications.

Colors & Finishes
  • Bone
  • Flaxen
  • Wheat
  • Sand
  • Buff
  • Thatch Brown
  • Adobe
  • Red Brick
  • Seattle Red
  • Concrete Gray
  • Delta Fog
  • Sterling
  • Slate
  • Safety Yellow
  • Safety Red
  • Safety Blue
  • Only available in clear
  • Gloss Finish
  • Satin Finish
Options
  • Available Formulas: Fast Cure
Packaging
  • 1 1/4 Gallons
  • 25 Galllons


See More


Sweets app for Revit – Learn More