Sika Corporation -Sikaplan Pre/Post Applied Loose-Laid Membrane - Sikaplan® WP 1130-15 C

DOWNLOADS

Waterproofing Membrane

Sikaplan® WP 1130-15 C is a 60 mil (1.5 mm) thick sheet waterproofing membrane, based on polyvinylchloride with an integral fiberglass mat carrier sheet for dimensional stability.


Category: below grade waterproofing and dampproofing | damproofing | membrane waterproofing...

MasterFormat: Dampproofing and Waterproofing


Related Products

Overview


Sikaplan Pre/Post Applied Loose-Laid Membrane - Sikaplan® WP 1130-15 C

Waterproofing Membrane

Sikaplan® WP 1130-15 C is a 60 mil (1.5 mm) thick sheet waterproofing membrane, based on polyvinylchloride with an integral fiberglass mat carrier sheet for dimensional stability. It is suitable for use in waterproofing of vertical and horizontal foundation applications and other below grade structures. The membrane contains a yellow signal layer with dark gray underside so that damages to the surface can be seen easier.

Sikaplan® WP 1130-15 C waterproofing membrane features:
  • High Tensile Strength and Elongation
  • Excellent Dimensional Stability
  • Specially Compounded for Sub-Grade Environments
  • Heat Welded Seams
  • Resistance to Varying Levels of Hydrostatic Pressure
  • Compatible with Sika Greenstreak Waterstops

Usage

Sikaplan® WP 1130-15 C is used for vertical and horizontal foundation applications, and other below grade structures requiring a waterproofing sheet membrane.

Advantages

Sikaplan® WP 1130-15 C waterproofing membrane features:
  • High Tensile Strength and Elongation
  • Excellent Dimensional Stability
  • Specially Compounded for Sub-Grade Environments
  • Heat Welded Seams
  • Resistance to Varying Levels of Hydrostatic Pressure
  • Compatible with Sika Greenstreak Waterstops

Packaging

Sikaplan® WP 1130-15 C rolls are 6.56 ft. (2 m) wide wrapped in a protective film and strapped to a wood pallet. Individual rolls weigh between 134-168 lbs (61-71 kg) depending on the membrane thickness.

Product Details

Product Information

Chemical Base

Carrier Sheet Material = Fiberglass

Shelf Life

N/A

Storage Conditions

Sikaplan® WP 1130-15 C membrane rolls should be stored in unopened, undamaged, original packaging, in a horizontal position, in dry conditions and at temperatures between 40 °F (5 °C) and 85 °F (30 C°). Sikaplan® rolls should be protected from direct sunlight, rain, snow and ice, etc. Do not stack pallets of the rolls on top of each other, or under pallets of any other materials during transport or storage.

Technical Information

Chemical Resistance

Contact a Sika Greenstreak engineering department at 800-325-9504 for technical assistance with chemical resistance.


See More


Specifications

Dimensional Change after Heat

Tensile Strength, min., (% of original)

95

Elongation, min., (% of original)

95

Effective Thickness

0.059 in (1.5 mm)

(ASTM D-638)

Linear Dimensional Change

0.002%

(ASTM D-1204)

Impact Strength

117.7 ft-pdl (5 J)

Pass

Permeability to Liquid Water

2.0%

(ASTM D-570)

Resistance to Static Puncture

56 lbf (250 N)

Pass

Resistance to Tearing (nail shank)
21.3 (94.7)

(ASTM D-1004), min., lbf (N)

Tensile Strength
1600 (11.1)

(ASTM D-638), min., psi (MPa)

Seam Strength [1], min.,

(% of tensile strength)

90

(ASTM D-638)

Pass

(ASTM E-154)