SikaProof Pre-Applied Fully Bonded Membrane - SikaProof® A+ 12
FPO sheet membrane for pre-applied fully bonded below ground waterproofing
SikaProof® A+ 12 is a polyolefin (FPO) based sheet membrane for below ground waterproofing of reinforced concrete structures. It is loose laid onto prepared substrates or formwork before fixing reinforcement and casting concrete. A special hybrid bonding layer on the membrane forms a permanent bond with the fresh concrete. Overlap joints are sealed using cold-applied tapes. The total thickness is 1.75 mm with a membrane thickness of 1.20 mm.
- Pre-applied: Fixed before placing reinforcement and casting concrete
- Dual bond: Mechanical and adhesive bond with fresh concrete
- High flexibility and crack-bridging capabilities
- No lateral water migration between the concrete structure and the membrane system
- High watertightness tested according to various standards
- Fully and permanently bonded to the reinforced concrete structure
- Resistant to aggressive conditions in natural ground water and soil
- Easy to install with fully adhered joints
- Temporarily resistant to weathering and UV exposure during construction
- Can be combined with other approved Sika® Waterproofing / Joint Sealing Systems
Usage
Damp-proofing, waterproofing and concrete protection for basements and other below ground concrete structures against ground water ingress. Suitable for use on:
- Reinforced concrete base slabs
- Reinforced concrete walls with single and double-faced formwork
- Extension and reconstruction works
- Prefabricated structures
Advantages
- Pre-applied: Fixed before placing reinforcement and casting concrete
- Dual bond: Mechanical and adhesive bond with fresh concrete
- High flexibility and crack-bridging capabilities
- No lateral water migration between the concrete structure and the membrane system
- High watertightness tested according to various standards
- Fully and permanently bonded to the reinforced concrete structure
- Resistant to aggressive conditions in natural ground water and soil
- Easy to install with fully adhered joints
- Temporarily resistant to weathering and UV exposure during construction
- Can be combined with other approved Sika® Waterproofing / Joint Sealing Systems
Color
Light yellow membrane containing a light grey bonding layer
Product Details
Product Information
Shelf Life18 months shelf life from date of production
Storage ConditionsProduct must be stored in original unopened and undamaged sealed packaging in dry conditions and temperatures between +5°C (40°F) and +30°C (86°F). Store in a horizontal position. Do not stack pallets of the rolls on top of each other, or under pallets of any other materials during transport or storage. Always refer to packaging.
System Information
System StructureThe following system products must be used:
- SikaProof® A+ 12 sheet membrane
- SikaProof® Tape A+ self-adhesive tape for internal jointing
- SikaProof® Sandwich Tape (optional alternative for internal jointing)
Ancillary products:
- Accessories and complementary products are available to provide detailing and connection solutions.
Technical Information
Application
Application Information
Substrate Moisture ContentNo Standing Water
Application Steps
EQUIPMENT- Tape measure
- Marking pen
- Razor knife
- Scissors
- Pressure roller
- Clean lint-free cloth
- Metal straight edge for cutting
- Protective sheet for cutting
SUBSTRATE QUALITYSikaProof® A+ 12 membrane must be applied on a sufficiently stable substrate to avoid movement during the construction works. Substrate surface must be smooth, uniform and clean. Large gaps and voids (≥ 12-15 mm) must be filled before membrane installation. Substrate can be damp or slightly wet, ponding water must be avoided. Suitable membrane fixing substrates include:
- Concrete blinding
- Formwork
- Rigid thermal insulation
- Plywood sheets / forms
- well compacted soil
See More
See Less