Injection Systems - Sika® Injection-307

Elastic polyacrylic injection resin used for permanent watertight sealing

Sika® Injection-307 is a very low viscous, elastic polyacrylic injection resin with a versatile and adjustable reaction time.

• Providing passivizing environment for embedded steel reinforcement
• Adjustable curing time between 5 and 50 minutes
• Permanently elastic, can absorb limited movements
• Capable of reversibly absorbing (swelling) and releasing (shrinking) moisture
• Solvent free acrylic resin
• Very low viscosity comparable to water
• Cured Sika® Injection-307 is insoluble in water and hydrocarbons and resistant to alkalis.

Usage

• Sika® Injection-307 is used for crack and joint injection
• Sika® Injection-307 is used for the injection of SikaFuko® injection hoses to seal construction joints
• Sika® Injection-307 is used to seal water-bearing cracks and voids
• Sika® Injection-307 is used for making new sealing walls (curtains) in damp or water saturated ground conditions, situated in close proximity to the building component or within the building structure
• Sika® Injection-307 is used as a post-construction, external injection sealing system for construction and limited movement expansion or drainage pipe joints, that are, or will be, covered with damp or water saturated soil
• Sika® Injection-307 can also be used for the repair by injection of damaged waterproofing membranes (single and double layer system)

Advantages

• Providing passivizing environment for embedded steel reinforcement
• Adjustable curing time between 5 and 50 minutes
• Permanently elastic, can absorb limited movements
• Capable of reversibly absorbing (swelling) and releasing (shrinking) moisture
• Solvent free acrylic resin
• Very low viscosity comparable to water
• Cured Sika® Injection-307 is insoluble in water and hydrocarbons and resistant to alkalis.

Product Details

Product Information

3-part polyacrylic resin

12 months shelf life from date of production if stored properly in undamaged, unopened, original sealed packaging.

Dry storage at temperatures from +10 °C up to +30 °C. Protect from direct sunlight and humidity.

Application

Application Information

+5 °C min. / +40 °C max.

+5 °C min. / +40 °C max.

5-50 minutes

Consumption

~ 40 litres per Sika® Injection-307 SET

Application Steps

Pour 10 litres of water in a clean container. Dissolve the content of 2 bags (total 800 g) of Component B in the water. Stir the hardener solution thoroughly until Component B is completely dissolved.

2. Prepare Accelerator Solution

Determine the required quantity of accelerator from the chart provided under mixing ratio, based on ambient processing temperature and required reaction time. Dilute the selected quantity of accelerator with water, to a total quantity of 1 litre accelerator solution.

3. Mix Accelerator Solution with Resin Component A

Pour the 1 litre of accelerator solution into one 9.6 kg canister of Component A and shake/mix thoroughly.

4. Mix Resin with Hardener

Depending on the type of injection pump used activate the injection resin using one of the methods below:

• One component pump: Pour partial amount of the pre-mixed components in a ratio of 1:1 by volume into a clean mixing container. Mix thoroughly using an electric mixer and fill into the storage container of the pump.
• Two component pump: Fill partial amount of the pre-mixed components into the storage container of the pump. Set the pump to work at a ratio of 1:1 by volume.

Clean all tools and application equipment according to the Product Data Sheet for the Sika® Injection Cleaning System.

See More

See Less