Right Pointe, LLC -Linseed Oil Anti-spall 50/50

DOWNLOADS

Overview

LINSEED OIL ANTI-SPALL 50/50 is a half and half solution of mineral spirits and boiled linseed oil that functions as a fast drying, penetrating concrete sealer.


Category: concrete sealers | penetrating sealers | sealers...

MasterFormat: Maintenance of Concrete | Common Work Results for Concrete | Cast-In-Place Concrete...



Right Pointe, LLC
234 Harvestore Drive
DeKalb, IL 60115
Tel: (815) 754-5700
Fax: (815) 754-5702

https://www.rightpointe.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Linseed Oil Anti-spall 50/50

Overview

LINSEED OIL ANTI-SPALL 50/50 is a half and half solution of mineral spirits and boiled linseed oil that functions as a fast drying, penetrating concrete sealer.

LINSEED OIL ANTI-SPALL 50/50 is designed to prevent the spalling and scaling of concrete, especially those structures that are exposed to the destructive effects of de-icing salts, freeze-thaw cycles, and ponding surface water. LINSEED OIL ANTI-SPALL 50/50 penetrates into the surface of concrete to seal and protect the material, extending its service life and protecting it from harsh winters.

  • Will cause an amber coloration on applied surfaces

  • Meets USEPA VOC regulations with a maximum 400 g/l VOC content

  • Penetrates into the concrete prolonging the service life

  • Prevents scaling and spalling

  • Can also be used on wood structures to preserve and seal

  • Ready to use

Specs

  • AASHTO M-233

  • ASTM D-260

  • ASTM D-235

  • IL D.O.T. section 1023.01 (TT-L-190D)

Use

The appropriate time of application for the maximum penetration of the sealer is after the final cure phase; most effectively after 28 days of curing. Before application of LINSEED OIL ANTI-SPALL 50/50, clean surface debris from the concrete to be treated. Once surface is clean and dry, spray one coating of LINSEED OIL ANTI-SPALL 50/50 over the surface of the concrete; avoid pooling on the concrete surface. LINSEED OIL ANTI-SPALL 50/50 may be applied with a standard hand held sprayer or power sprayer; a short napped roller is recommended for brush application. A second application of LINSEED OIL ANTI-SPALL 50/50 is recommended and can be applied after two (2) hours. Restrict foot traffic until surface is completely dry.

  • Bridge decks

  • Driveways

  • Sidewalks

  • Garage floors

  • Barrier medians

  • Roadways

  • Airport runways

  • Parking garages

  • Foundation walls

Features

  • Ready to use

  • Time tested reliable technology

Packaging

5 Gallon Pails

55 Gallon Drums


See More


Specifications

Coverage
First application200 sq ft/gal
Second application600 sq ft/gal
Sweetsstakes