Rakks/Rangine Corporation -Aluminum Bookshelf

DOWNLOADS

Aluminum Bookshelf Features

Rakks aluminum bookshelves feature an attractive low-profile design that exceeds the strength and stiffness of 3/4” plywood. Shelf depths of 4, 6, 8, 10, 12, 14, 16 and 18 inches can be achieved by combining four


Category: shelf | shelves | shelves...

MasterFormat: Storage Specialties | Storage Assemblies | Wall-Mounted Standards and Shelving...



Rakks/Rangine Corporation
330 Reservoir Street
Needham, MA 02494
Tel: (800) 826-6006
Fax: (781) 455-8702

sales@rakks.com

http://rakks.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Aluminum Bookshelf

Aluminum Bookshelf Features

Rakks aluminum bookshelves feature an attractive low-profile design that exceeds the strength and stiffness of 3/4” plywood. Shelf depths of 4, 6, 8, 10, 12, 14, 16 and 18 inches can be achieved by combining four and six-inch deep sections. This lightweight, easy-to-ship shelf can be ordered in specified lengths up to twelve feet. The extruded aluminum bookshelf features a textured top surface which hides scratches and assures a uniform appearance.

Rakks bookshelves add a feeling of style, modern design and sophistication to your living room, library, bedroom or office. Our sales team can assist you with determining what system is right for your home or apartment or office. Rakks bookshelves are easy to assemble and available in custom colors.


See More


Specifications

SA-04 ALUMINUM BOOKSHELF

This four-inch extruded aluminum bookshelf can be supported on Rakks Style (BR-004) shelf brackets or used in combination with other shelf sections to make 10”, 14” or 16” deep shelves.

SA-06 ALUMINUM BOOKSHELF

This six-inch extruded bookshelf can be supported on Rakks Style (BR-006) shelf brackets or used in combination with other shelf sections to make 10”, 12” or 16” or 18” deep shelves.

SAF-06 ALUMINUM BOOKSHELF FILLER

This six-inch filler is used to configure shelf depths requiring three sections. Vertical front and back faces line up with and join the SA-04 or SA-06 sections to create 14”, 16” or 18” deep bookshelves. Double-sided tape is provided to keep shelf sections aligned.

CUSTOM BOOKSHELVES

Rangine can supply wood veneer (clear finished or stained), plastic laminated, melamine or glass shelves made to your exact specifications. Note: there is a $300 minimum on custom shelf orders.

ADJUSTABLE ALUMINUM SHELVES - EXTRUDED - SPECIFICATIONS
ADJUSTABLE ALUMINUM BOOKSHELF SHELF MATERIAL:

6063-T6 extruded aluminum.

ADJUSTABLE ALUMINUM BOOKSHELF CAPACITY:

Deflection, based on a uniform load across a 36″ span.
SA-04 1/4″ deflection @ 60#
SA-06 1/4″ deflection @ 90#
SAF-06 1/4″ deflection @ 90#
Note: shelf capacities are cumulative. A 10″ deep shelf can support 150 pounds with 1/4″ deflection.

ADJUSTABLE ALUMINUM BOOKSHELF LENGTH

Aluminum Shelves are custom cut and deburred in the factory at any length up to 144″.

ADJUSTABLE ALUMINUM BOOKSHELF THICKNESS:

All shelves are .6″ thick.

ADJUSTABLE ALUMINUM BOOKSHELF WEIGHTS:

SA-04 0.60 lbs/ft
SA-06 0.91 lbs/ft
SAF-06 1.02 lbs/ft

FINISH:

Stocked in Clear anodized aluminum.
Available in custom finishes.

TAPE:

3M™ VHB 4930 double sided tape
7/16″ x 2″ is provided to keep shelf sections aligned.

RETAINING PIN

Extruded aluminum shelves are designed to be compatible with Rakks Style shelf brackets and retaining pins. The front stiffener leg of the shelf lines up behind the retaining pin in all shelf depth configurations. When using aluminum shelves with wall mounted standards and brackets, retaining
pins should always be specified to keep the shelves from separating or sliding forward.

SHELF LIP BRACKET

This Rakks Style bracket allows aluminum shelves to be used for literature and other product display in a slanted configuration. Two-inch hangbar/stiffener secured in the notched brackets, retains the shelf and creates an attractive lip. Available in any angle and all shelf depths.

SHELF SPLINE

Used to align extruded aluminum shelf sections to create a continuous shelf in excess of 12′. Extruded aluminum spline fits securely into shelf bottom joining sections, keeping them in alignment. Note: Shelves must always join at a bracket. Finish: Clear anodized aluminum.

SHELF HOLD DOWN CLIP

Used to attach Rakks extruded aluminum shelves to a Rakks Style shelf support bracket so that they cannot be easily removed. Hold down clips should also be used when the end of the shelf does not extend very much beyond the bracket and might slide off. The hold down clip is secured to the shelf with a setscrew from the bottom and secured to the bracket with a setscrew from the side. When using shelf hold down clips, it is not necessary to order retaining pins. Finish: Clear anodized aluminum.

SHELF ENDS

A decorative aluminum cap that fits securely to the end of Rakks extruded aluminum shelves. Provides an alternative look and protects the shelf ends in high traffic areas. Available for all shelf depths up to 18” in clear anodized aluminum only.

LABEL HOLDER

Attaches to the front edge of SA-06 and SA-04 aluminum shelves
using a hidden thumbscrew. Holds 1/2″ tall labels. Lengths as specified. Model SA-LBL.

SLIDING BOOKEND

These adjustable bookends integrate into the base of the aluminum shelves and can be secured at any point along the shelf with a thumbscrew. Use with surface mounted standards or with pole applications having clearance at the back of the shelf. Sliding bookends are available in one size, 8-1/2″.

Sweetsstakes