Metal-Era, Inc. - Anchor-Tite Extended Fascia Fully Adhered or Mechanically Attached Single-Ply Version

Anchor-Tite Fascia provides your single-ply roof system with the maximum protection against wind up-lift damage that is available in today’s roofing market. It is backed by a lifetime 215 mph wind warranty and supported by extensive industry testing to bring long-term, worry-free performance.


Category: eave fascias | eave trim | gable trim...

MasterFormat: Maintenance of Steep Slope Roofing | Roof and Wall Specialties and Accessories | Manufactured Gravel Stops and Fasciae...



Metal-Era, Inc.
1600 Airport Road
Waukesha, WI 53188
Tel: (800) 558-2162
Fax: (800) 373-9156

info@metalera.com

http://www.metalera.com

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Anchor-Tite Extended Fascia Fully Adhered or Mechanically Attached Single-Ply Version

Anchor-Tite Fascia provides your single-ply roof system with the maximum protection against wind up-lift damage that is available in today’s roofing market. It is backed by a lifetime 215 mph wind warranty and supported by extensive industry testing to bring long-term, worry-free performance. In addition, Anchor-Tite Fascia is designed for fast and easy installation, eliminating the stripping in that is typical of other roof edge designs.

Features / Benefits
Warranty: The Lifetime, 215 mph is available on all Metal-Era manufactured Anchor-Tite products. It covers replacement or repair of any portion of the system that has failed due to a defect in Metal-Era supplied materials. The warranty covers the roof edge for the lifetime of the roof on which it was originally installed.
Testing:
  • Tested per ANSI/SPRI/FM 4435/ES-1 Standard to a design pressure of 176 lbs./ft² to comply with the International Building Code.
  • Factory Mutual approved for wind uplift protection.
  • Miami-Dade Approved (No. 13-0419.03 12/11/18) to comply with the “High Velocity Hurricane Zone of the Florida Building Code.”
Standard Sizes: Sizes range from 8 ½" up to 13" face heights to accommodate multiple nailers and coverage requirements.
  • 8 ½"
  • 10"
  • 11 ½"
  • 13"
Anchor Bar Protection: The patented, extruded aluminum anchor bar securely terminates the membrane. This provides protection unlike any other manufactured or shop-fabricated edge. The anchor bar is readily available to dry-in the roof structure.
Available Materials: Covers can be manufactured in .050" and .063" aluminum.
Splice Plates: Interlocking, concealed splice plate design prevents splice plate migration under the fascia panels. This creates a more aesthetically pleasing design compared to traditional cover plates or lap joints at the seams.
Watertight: Non-penetrating design eliminates the need for stripping-in or heat welding that is typical of many other roof edge designs. Watertight integrity is not compromised by improper flashing procedures, failed adhesives or lap sealants.
Competitively Priced: The installed cost rivals even light gauge roof edge systems fabricated locally or in a roofer’s shop.
Efficient Design: Provided in 12'-0" lengths with pre-punched holes for quicker installation and lower labor costs. The fastening holes are slotted to allow for thermal movement of the materials and ensure correct fastener placement and spacing.
Colors: Choose among a wide range of standard colors and finishes that meet your job requirements. A 30 year Kynar 500® finish warranty is included on coil-coated standard colors. Custom post-coated Kynar 500® colors are available with an included 10 year Kynar 500® finish warranty or a 20 year Kynar 500® finish warranty is available upon request.
Anodized finishes are also available and come with a 5 year warranty (no warranty available for coil anodized finishing. Post-coat/Class 1 Batch Anodized is available with a 5 Year warranty with an option to increase to a 10 Year warranty for an upcharge). Please email Technical Services regarding pricing for Anodized finishes.
Custom Capabilities: Radius and specially fabricated products are available to meet the unique needs of each project.
Accessories: Factory fabricated miters, scuppers and drainage accessories provide a cleaner, more aesthetically pleasing appearance. This eliminates the need for field fabrication, providing time and labor savings.
Also Included: All anchor bar EPDM splice plates and fasteners are included and will arrive to the job site with the product (sealant by others).
Reuseable/Recyclable Material: When reroofing, the anchor bar can be removed, cleaned and reinstalled at any time without compromising its strength and appearance.


See More


Sweets app for Revit – Learn More