GAF -StreetBond® CemBase Asphalt Fortifier

DOWNLOADS

Why StreetBond® CemBase Asphalt Fortifier?

StreetBond® CemBase Asphalt Fortifier is a high-performance, cementitious, epoxy-modified


Category: asphalt paving | finishes | high-performance coatings...

MasterFormat: Dampproofing and Waterproofing | Traffic Coatings | Pedestrian Traffic Coatings...



GAF
1 Campus Drive
Parsippany, NJ 07054
Tel: (800) 766-3411

https://www.gaf.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


StreetBond® CemBase Asphalt Fortifier

Why StreetBond® CemBase Asphalt Fortifier?

StreetBond® CemBase Asphalt Fortifier is a high-performance, cementitious, epoxy-modified, acrylic-based waterborne surfacing product designed for application on stamped (textured) asphalt pavements only.

Benefits
  • Worker safe
  • Creates no unpleasant odors (during or after installation)
  • Meets EPA requirements for Volatile Organic Compounds (VOCs)
  • Fully recyclable with the asphalt
  • Epoxy modified and acrylic based
Uses
  • StreetBond® CemBase Asphalt Fortifier fortifies asphalt pavement to help resist scuffing on weaker stamped asphalt such as driveways or pathways.
  • It is applied as the two initial layers in a StreetBond® application over a printed surface that needs fortification.
  • StreetBond® CemBase Asphalt Fortifier is combined with StreetBond® Colorants to offer a wide range of colors.
  • It can also be combined with StreetBond® Solar Reflective (SR) Colorants to produce cool pavement surfaces for compliance with LEED® specifications for urban heat island mitigation, as well as to provide more comfortable environments.


See More


Specifications

Available Sizes - Jug
Available Sizes1-gallon (3.8 liter)
Available Sizes - Bag
Available Sizes34.4 lb. (15.6 kg)
Product Properties - Specifications
Density14.2 lb./gal. (1.70 g/mL)
Volume Solids60% ±2%
Weight Solids74% ±2%
VOC (Calculated)<25 g/L
Taber Abrasion (Dry - H-10 wheel)0.41 g/100 cycles
Taber Abrasion (Wet - H-10 wheel)6.92 g/100 cycles
Mandrel Bend3/8” @ 21°C
Water Absorption10.20%
Permeance13.43g/m² / 24hr/mmHg (52 mils)
Drying Time (Touch Dry)1-4 hours at 77°F (25°C) and 40% humidity
Freeze Point32°F (0°C)
Application Temperature+50°F to 105°F (Ambient) (10°C to 40°C)
Sweetsstakes