Foster™ -Foster® 40-20™ Fungicidal Protective Coating

DOWNLOADS

ATTRIBUTES Foster ® 40-20 TM Fungicidal Protective Coating (40-20)is a polyacrylate copolymer emulsion specifically formulated for long-term fungicidal activity, with no loss of activity on aging. It is formulated to effectively prevent the spread of molds and odor-causing bacteria on its surfa


Category: decorative coatings | mold remediation coatings | special coatings...

MasterFormat: Mold Remediation | Thermal Protection | Thermal Insulation...


Related Products

Overview


Foster® 40-20™ Fungicidal Protective Coating

ATTRIBUTES


Foster ® 40-20 TM Fungicidal Protective Coating (40-20)is a polyacrylate copolymer emulsion specifically formulated for long-term fungicidal activity, with no loss of activity on aging. It is formulated to effectively prevent the spread of molds and odor-causing bacteria on its surface. It provides a tough, elastic, decorative finish that allows for movement without splitting and creating lodging places for bacteria.

Foster 40-20 provides a cost effective decorative finish resistant to many industrial chemicals, together with long-lasting protection. It can be used on walls, ceilings, pipes, interior and exterior surfaces of HVAC duct systems, and wherever effective controls are essential.

Foster 40-20guards against the re-growth and spread of odor-causing bacteria and molds on the surface of the coated HVAC system or its treated components only. As a result, the building occupants may enjoy a work space free of the odor problems often associated with contaminated HVAC duct systems.

Foster 40-20 meets requirements for LEED ® EQ Credit 4.2, low- emitting materials: paints and coatings. VOC: 42 g/l, less water and exempt solvents.

LIMITATIONS:
Protect from freezing. Do not apply near food stuffs in unventilated areas. Always ensure adequate ventilation. Do not store or apply over 100ºF (38ºC) or below 40ºF (4.4ºC). Water-based products may corrode carbon steel spray equipment. Corrosion resistant pumps and fittings are suggested.

DO NOT DILUTE.
EPA Registration No. 63836-1

EPA Est. No. 63836-TX-001
For professional use only
FPDS40-20 R0217 Foster, the Foster design and 40-20 are trademarks of H. B. Fuller Construction Products Inc.


COLOR:
White

APPLICATION CONSISTENCY:
Brush or airless spray

AVERAGE WEIGHT/U.S. GALLON (ASTM D1475):
11.9 lbs. (1.43 kg/l)

AVERAGE NON-VOLATILE (ASTM D2369):
58% by volume

COVERAGE RANGE:
Wet coverages shown are for smooth, non-porous surfaces. Porous or rough surfaces may require higher gallonage to obtain required thickness. 1.25 gal./100 sq. ft. (0.51 l/m2 ) 0.020 in. wet thickness (0.51 mm) 0.011 in. dry thickness (0.27 mm)

DRYING TIME (ASTM D1640):
Set to Touch: 4 hours
Dry Through: 16 hours

WATER VAPOR PERMEANCE (ASTM F1249):
Tested at 90% R.H. differential and 100ºF (38ºC) 6.0 perms at 0.011 in. (4.0 metric perms at 0.28mm)

SERVICE TEMPERATURE LIMITS (FSTM 70):
(Temperature at coated surface) -20ºF to 200ºF (-29ºC to 93ºC)

SAFETY:
Wet Flammability (ASTM D3278) No Flash to Boiling 210ºF (99ºC)

SURFACE BURNING CHARACTERISTICS (ASTM E 84):
Flame Spread: 15
Smoke Developed: 5 Tested at a coverage rate of 80 square feet per gallon (1.96 m2 /liter). Applied to inorganic reinforced cement board. The flame spread may vary at different product thicknesses and/or when applied over other surfaces. Foster Fungicidal Protective Coating meets NFPA 90A and 90B 25/50 requirements

Visit us on the web at www.fosterproducts.com


See More


Sweetsstakes