Amarr® Garage Doors -Opera OSH - Hoist Commercial Door Operator

DOWNLOADS

Heavy-Duty Industrial Jackshaft Operator with Solenoid Brake

25 CYCLES/HOUR - >100 CYCLES/DAY

The Opera-SH fills the gap between regular jackshaft and gearhead operators.


Category: coiling door operators | overhead door operators | roll-up door operators...

MasterFormat: Industrial Doors | Hardware | Door Hardware...



Amarr® Garage Doors
165 Carriage Court
Winston-Salem, NC 27105
Tel: (800) 503-3667

Ask.amarr@amarr.com

https://www.amarr.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Opera OSH - Hoist Commercial Door Operator

Heavy-Duty Industrial Jackshaft Operator with Solenoid Brake

25 CYCLES/HOUR - >100 CYCLES/DAY

The Opera-SH fills the gap between regular jackshaft and gearhead operators. This is an ultra high-end heavy-duty V-belt drive industrial operator designed for use on standard, high and vertical lift sectional doors or rolling doors and grilles.

The operator can be wall, hood, or shelf mounted on either side of the door. It incorporates a chain hoist for manual operation, with a floor level engaging device.

The operator is available with the new Electronic Control Board (BOARD 070) with or without the option of electrical control for MONITORED external entrapment protection devices (UL325-2010 compliant).

STANDARD FEATURES

Motor: 60Hz high starting torque, continuous-duty, single phase capacitor start or 3 phase motor, open drip proof, protected against overload. Also available with 50Hz 220V 1 phase and 380V 3 phase motor, consult inside sales.

Reduction: First step in reduction 5L/B V-belt drive, additional steps by chain and sprockets. Input shaft is 3/4", supported by cast iron flanged pillow block bearings. Output shaft is 1" with 1/4" keyway, supported by cast iron flanged pillow block bearings. Output shaft speed: 41 rpm.

Clutch: Friction type, positioned on input shaft, easily adjustable from outside.

Drive: #50 roller chain with a 50B12 sprocket for the operator drive shaft. Door sprocket selected for a door travel of 6"/s to 12"/s.

Brake: Electrically activated drum-band type solenoid brake.

Limit System: Rotary-type oil-impregnated steel cams, commercial grade switches. Limit shaft is supported by self-lubricating bronze bushings for increased precision. Remains in time when there is a manual operation or after the motor has been removed.

Accu-cam® Feature: Precise and quick one-handed adjustment of the limits.

Corrosion Protection: Frame and control enclosure protected by baked on, long lasting enamel finish. Polymer control box cover. All shafts protected by yellow chromate coating.

Warranty: 2 Years


See More