Epoxies - Sikadur®-301

High modulus and high strength impregnation resin

Sikadur®-301 is a two component, 100 % solid, high modulus, high strength and moisture resistant epoxy adhesive.

• Medium pot life.
• Easy to mix
• Resistant to moisture before, during and after curing
• High strength and high modulus adhesive
• Excellent adhesion to concrete, masonry, metals, wood and most building materials
• Fully compatible and developed specifically for SikaWrap systems
• High resistance to deformation under sustained load
• High resistance to abrasion and impacts
• Solvent free

Usage

As impregnation resin of SikaWrap fabrics for structural reinforcement.

Advantages

• Medium pot life.
• Easy to mix
• Resistant to moisture before, during and after curing
• High strength and high modulus adhesive
• Excellent adhesion to concrete, masonry, metals, wood and most building materials
• Fully compatible and developed specifically for SikaWrap systems
• High resistance to deformation under sustained load
• High resistance to abrasion and impacts
• Solvent free

Packaging

4 gal. unit (15.14 L)

Color

Light gray

Product Details

Product Information

Shelf Life

24 months from its date of production

Storage Conditions

Store in its original container, tightly closed, fresh and indoor. Transport with normal precautions for chemicals

Viscosity

Approx. 2,700 cps.

Application

Application Information

Mixing Ratio

Component ‘A’: Component ‘B’ = 3:1 by volume.

Pot Life

Approx. 40 minutes (1 gal., 3.8 L volume).

Contact Time

Approx. 90 minutes

Consumption

Coverage

As a sealer: Approx. 75 ft²/gal. (1.84 m²/liter).
As the impregnation resin: Approx. 50 ft²/gal. (1.23 m²/liter). depending on the type of SikaWrap.

Application Steps

SUBSTRATE PREPARATION

The concrete surface should be prepared to a minimum concrete surface profile (CSP) 3 as defined by the ICRI-surface-profile chips. Localized out-of-plane variations, including form lines, should not exceed 1/32 in. (1 mm). Substrate must be clean, sound, and free of surface moisture. Remove dust, laitance, grease, oils, curing compounds, waxes, impregnations, foreign particles, coatings and disintegrated materials by mechanical means (i.e. sandblasting). For best results, substrate should be dry. However, a saturated surface dry condition is acceptable.

MIXING

Pre-mix ‘A’ component, (‘B’ component does not require mixing). Mix entire unit, do not batch. Pour contents of Part ‘B’ into Part ‘A’. Mix thoroughly for 5 minutes using a paddle style mixer on low speed (400-600 rpm) rotary drill until uniformly blended.

See More

See Less