Rolling Steel Service Doors - 610

Rolling steel door model 610 is a perennial best-seller for good reason. The standard features exceed the norm for quality and a myriad of options allow for true customization. The Model 610 is built with a standard galvanized steel curtain, or an optional stainless steel or aluminum curtain. The standard curtain slat is the attractive C-187 curved profile, with additional slat options available in curved and flat. Finishes range from four standard colors to approximately 200 powder coat colors or matched to your specification. A host of other options - including motor operation, pass doors, exhaust ports, between-jambs mounting, cylinder locks and special usage packages - allow the 610 to be adapted to any environment.

Security and Storm Shelter Model 610F is a specialized option designed for storm shelters, schools and emergency operations centers. Model 610F provides tornado resistance while meeting the high wind load and impact requirements for FEMA 361.

Overview

Construction

Product Specifications

Standard Max Width

30'4" (9246 mm)

Standard Max Height

28'4" (8636 mm)

Curtain

16 ga. galvanized steel up to 30'4" (9246 mm) width (F-265 only)
18 ga. galvanized steel up to 30'4" (9246 mm) width*
20 ga. galvanized steel up to 25'4" (7722 mm) width*
22 ga. galvanized steel up to 18'4" (5588 mm) width*
24 ga. galvanized steel up to 15'4" (4674 mm) width*
* not all slat profiles

Finish

Gray, tan, white or brown

Hood

24 ga. galvanized steel

Wind load

20 psf

Standard mounting

Face of wall

Operation

Manual push-up up to 84 sq. ft. (7804 sq.mm) or 12' x 7' (3658 mm x 2134 mm)
Chain hoist over 84 sq. ft. (7804 sq.mm) or 12' x 7' (3658 mm x 2134 mm)

Standard springs

20,000 cycle

Weatherseals

Bottom bar astragal

Guides

Three structural steel angles PowderGuard® weathered finish with black powder coat

Bottom bar

Extruded aluminum with weatherseal up to 15'4" (4674 mm)
Back-to-back steel angles with weatherseal more than 15'4" (>4674 mm)

Lock

Interior slide bolt on push-up
Padlockable chain keeper on chain hoist

Warranty

• 24-month limited on door
• 3 year/20,000 cycles limited on door & operator system (when purchased together)

Fenestration
Curved slat with 3" x 5/8" fenestration
F265 slat with 10" x 1" fenestration

Enhancements

Door Options

• Electric operator (RHX®, RSX®, RMZ®) or crank operation
• Bottom sensing edge
• Sloping bottom bar
• Between-jambs mounting
• Stainless steel or aluminum slats
• High-usage package
• High-wind load (FBC, TDI, DADE)
• Cylinder lock
• Exhaust ports
• Flat slat profile (F-265)
• C-600 heavy duty 6" curved slat profile
• Perforated 18 ga. steel slats with 1/16" (2 mm) diameter holes on 1/16" (2 mm) centers
• Fenestrated 18 ga. steel slats with uniformly spaced openings of 5/8" x 3" (16 mm x 76 mm) on C-275 or F265 slat profiles
• Fenestrated 18 ga. steel slats with uniformly spaced openings of 1" x 10" (25.4 mm x 254 mm) on F265 slat profile
• PowderGuard® Premium powder coat finish options are available in approximately 200 colors as well as custom matching to specification.
• PowderGuard® Zinc and PowderGuard® Weathered finishes
• Special application doors:
  • Oversized doors to 1500 sq. ft. (139.4 sq. m)
  • Combination doors with grilles and/or with full or partial standard, perforated or fenestrated slats
  • Spark-resistant doors, craneway doors, pass doors
• Security, Tornado and Storm Shelter Door - 610F
  • FEMA 361
  • Structural Wind Load ASTM with design pressure of +/- 300 psf
  • Impact testing ASTM E1886; Impact rated at 100 mph
  • 12 gauge galvanized steel
  • Available in door sizes 4’ x 4’ through 12’ x 12’

Slat profile

STANDARD - CURVED

C-187 is standard up to 15'4" (4877 mm) wide in 22 Gauge. Other gauge options available.

C-275 is option up to 15'4" and standard for doors over 15'4" wide (4877 mm). Gauge dependent on opening width. Fenestrations available in uniformly spaced openings of 5/8" x 3" (16 mm x 76 mm). Perforation or fenestration options available for air and light infiltration available on 18 gauge primed steel only.

OPTION - FLAT

F-265 available up to 30’4” (9246 mm) wide in 18 gauge. Other gauges available. Fenestrations available in uniformly spaced openings of 5/8" x 3" (16 mm x 76 mm) or 1" x 10" (mm x mm). Perforation or fenestration options available for air and light infiltration available on 18 gauge primed steel only.

F-265E - 14 gauge extruded aluminum solid slat available up to 20’4” (6198 mm) width. Perforation or fenestration not available on model 610 on F265E.

C-600 - For special applications requiring herculean size and strength, consider the 610 Series door with C-600 slats. This non-insulated, oversized door fits openings up to a maximum 1500 square feet (139.4 m2.), in widths up to 70' (21,336 mm) and heights up to 30'4" (9246 mm). The curtain is crafted with 6" x 1 3/8" (152 mm x 35 mm) curved, 18, 16 or 14-gauge steel slats for unparalleled strength and durability. No perforation or fenestration on model 610 on C-600.

See More

See Less