Bar Foot Rail Tubing - Antique Brass - 2" OD
This Antique Brass bar foot rail, available in a variety of lengths, is a valuable, attractive component in adding the luxurious look of bar foot rails to your bar.
Add a bar foot railing to your setup with this antique-finished metal tubing. This Antique Brass-finished brushed stainless steel pipe is available in a variety of tube sizes from 2-feet through 8-feet to fit the size of your bar.
With its classy aged brass finish, this electro-plated stainless steel bar foot rail is made to add a long-lasting, unique style to any home or commercial bar.
To properly install this 2-inch tubing along your bar, add your chosen style of bar foot rail brackets in the same diameter. Be sure to carefully measure where each bracket will be placed before drilling into your bar, wall, or floor. For proper support, bar brackets should be placed at each end of the tubing, plus one for every 4-foot increment.
To allow the bar foot rest to match the unique angles of your bar, use elbows and fittings. With end caps and flanges, you can ensure that your bar rail has a finished look and is mounted correctly in any space.
When ordering tubing, it's always wise to round up to the nearest foot. If your bar is not an even full foot increment, but rather has some inch increment (i.e. 6' 2", 7' 2") you will need to order up to the next foot. So if your bar is 3' 2" you will need to order a 4-foot piece of tubing, if your bar is 7' 2" you will need to order an 8-foot piece of tubing, and so on. If this is the case, you will need to cut the rail with a miter saw prior to installation.
To connect two sections of tubing together, an internal splicing sleeve can be used. The seam between two joined pieces is then covered by placing a bracket over the joint.
By using this Antique Brass stainless steel bar rail tubing with matching components, completing a DIY bar foot rail project is easier than it sounds. Achieve a consistent look throughout your bar, with added comfort for your guests.
Please note: The base metal for Antique Brass finished tubing is made from brushed stainless steel. You can special order the antique brass finish with brass as the base metal for an additional charge.
Features- Antique Brass finish
- Made of brushed stainless steel
- Matching components available
- Makes the bar more comfortable for guests
- A stylish addition to any bar
- A bracket should be used at both ends and at every 4' increment
- Suitable for indoor use only
Specifications- Outside Diameter: 2"
- Wall thickness: .050"
See More
See Less