6006 Swing Gate Operator

DKS 6006 Swing Gate Operator offers convenience and reliability in a compact, aesthetic design. This Operator mounts directly to your gate and pilaster, simplifying installation and not requiring concrete mounting pads.

Overview Features Tech Specs Resources Accessories

6006 Swing Gate Operator

Gate Mounted, Low Voltage, Compact Design

DKS 6006 Swing Gate Operator offers convenience and reliability in a compact, aesthetic design. This Operator mounts directly to your gate and pilaster, simplifying installation and not requiring concrete mounting pads. The screw-driven action is powered by a 24 Volt DC motor, eliminating the worry over hydraulic leaks, check valves or pumps. Built-in no-contact magnetic limit switches precisely control the start / stop speed of the operator, all powered by a microprocessor control board.

The 6006 operator operates on 24 Volt DC power and features built-in limit switches that precisely control the start / stop speed, and travel of your gate. The microprocessor-based electronic control board provides many advanced features typically not found in operators in this class. The control box can be powered by 120 Volt AC, which is then converted to 24 Volt DC to power the operator and control board. Two 120 Volt control boxes are available to choose from, Deluxe and Standard. The Deluxe control box includes three 120 VAC outlets to power accessory transformers. Both include 3.5 Ah (Amp Hour) batteries for backup power operation. You can also select our Solar Powered Control Box, which eliminates the need for high-voltage power runs. for more information on the Solar Power option and a 26% tax credit.

Product Features

Solar Powered Control Box

Eliminate expensive trenching with the Solar Control Box, residential homeowners can also take advantage of the 30% Solar Tax Credit for energy-efficient properties.

Smooth Operation

6006 Swing Gate Operator provides smooth gate operation soft start/soft stop.

Reliability

In a compact and simple to

install design

Keyed Release

The gate will remain closed if the power is lost, with options to manually operate the gate or rely on a backup battery

Easy Install

No-dig installation, the 6006 mounts directly to the gate and gate post. Rear bracket pivots, allowing the unit to be removed easily

Fully Enclosed

The enclosure has an IP54 protection class rating, delivering a high level of protection against particles and water for a reliable product built to last for years.

8′ / 16′ / 18′ Maximum Gate Lengths

1,600 lb. / 800 lb. / 600 lb. Maximum Gate Weights

Opens 90º in Approx. 18-20 Seconds

Included Battery Backup & Optional Solar Panel

Equivalent to 1/2 HP

Specifications

• Gate Maximums: (Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
  8 Ft. (2.43m) @ 1600 lbs (725.7kg)
  16 Ft. (4.87m) @ 800 lbs (362.8kg)
  18 Ft. (5.48m) @ 600 lbs (272.1kg)
• Speed: 90° in approximately 18-20 seconds
• Actuator operates at 24 Volts DC power.
• Class I, II applications.
• Compliant with UL 325 and 991. ETL Listed.

  (Note: To be compliant with UL 325 and industry safety guidelines, additional Type B1 and/or Type B2 entrapment protection devices need to be installed with this gate operator.

  Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
• Dimensions (actuator only): 4″ (10.1cm)D x 6.25″ (15.8cm)H x 40″ (101.6cm)L
• Dimensions (120 Volt deluxe control box): 14.5″W x 24″H x 4.25″D
• Dimensions (120 Volt standard control box): 12.5″W x 16.5″H x 4.25″D
• Dimensions (24 Volt Solar control box): 13″W x 21″H x 8″D

MISCELLANEOUS

Environmental: 32°F to 115°F (0°C to 46°C) *
* The temperature range shown is for optimal battery performance. While these systems will operate beyond these limits, exceeding the temperature range willreduce battery efficiency and may cause permanent battery damage.

Shipping Weights:

Actuator:

Approx 20 lb (9.1 kg) Std Control Box: Approx 30 lb (13.6 kg) Deluxe Control Box: Approx 40 lb (18.14 kg)

Solar Control Box w/18 Ah Batteries:

Approx 60 lb (27.22 kg) Solar Control Box w/35 Ah batteries: Approx 90 lb (40.82 kg)

Solar Control Box (No Batteries):

Approx 30 lb (13.6 kg)
Actuator will not run without entrapment protection device(s) connected to the controller board.

Mechanical

• Primary Reduction: worm gear 1:27
• Speed: 90° in approximately 18-20 secs.
• Maximum Opening: 110°
• Case: 3.5mm double painted aluminum
• Easily adjustable magnetic limits
• Left or right hand mounting
• Keyed release for manual operation.
• Fail-Secure mechanical
• Control Box enclosure rated NEMA 4X
• Protection Class IP54
• Internal adjustable no contact magnetic limit switches.
• Overlap feature for dual swing gate operation.
• Magnetic lock output.
• Screw drive.
• Fully enclosed gear-reduction to maintain lubrication.
• 24 VDC operating power.
• Built-in battery back-up.
• Separate control panel.

ELECTRICAL

• Built-in Battery Charger
• Gate Overlap feature for dual gate operation
• Magnetic Lock Power Circuit (115 VAC Control Box only)
• Built-in Reset and Test Buttons
• Maximum Run Timer
• Built-in High Current Warning
• 0.0 A SBPD Circuit (Pat Pend) (Solar Control Box only)

See More

See Less