HEL-COR® Corrugated Metal Pipe (CMP)
HEL-COR corrugated metal pipe (CMP) is used in drainage, culverts, storm sewers, canals, and stormwater detention applications. HEL-COR is available in a large variety of materials, coatings, and sizes to meet site specific needs, and HEL-COR’s continuous locked seams and annular corrugated ends allow for a variety of standard couplings to be used.
Corrugated Metal Pipe for Storm Sewers, Culverts, Small Bridges, and Stormwater SystemsHEL-COR® helically corrugated metal drainage pipe provides the power to withstand severe environmental conditions and burial depths associated with drainage systems, culverts, storm sewers, and stormwater detention systems.
HEL-COR service life exceeds 100 years with proper specification that meets all AASHTO and ASTM pipe specifications, and it can handle fill heights in excess of 100 feet.
A wide choice of coatings including galvanized steel, aluminized steel type 2 (ALT2), and polymer-coated steel are available to meet a variety of durability requirements. A variety of wall thicknesses (gages), corrugations, diameters, and pipe section lengths permit a choice of materials to meet specific job site requirements.
Standard fittings include tees, wyes, elbows, saddle branches, reducers and manifolds for detention systems. Manholes and catch basins can be fabricated to meet specific job requirements. HEL-COR is manufactured with continuous locked seams with annular corrugated ends enabling the use of a variety of standard couplings including soil-tight HUGGER® Bands and QUICK STAB® Joints.
HEL-COR Pipe Features and BenefitsFEATURES
Long service life
Strength
Versatile
Flexible
Lightweight
BENEFITS
Exceeds 100-years with proper specification that meets all AASHTO and ASTM pipe specifications
Can handle fill heights in excess of 100 feet
Available in a wide variety of shapes and sizes; diameters from 6 inches to 15 feet
Forgiving during the rigors of installation and allows for steep slope applications
Easier and less expensive to install than concrete pipe
HEL-COR Pipe Coatings - Galvanized Steel - Corrugated galvanized pipe made from steel coated with zinc to extend service life. The most widely used and most economical metallic coating for corrugated steel pipe.
- Aluminized Steel™ Type 2 - Pipe made from steel that has been hot-dipped in commercially pure aluminum; offers 75 years or more of maintenance free service life.
- Polymer-Coated - Pipe made from steel with a heavy-gage polymer coating; protects against abrasion and corrosion to provide at least 100 years of service life with a guaranteed 80-years “add-on” according to the 2012 Polymer Coated CSP Study performed by the NCSPA.
- Asphalt Coated - Steel pipe coated with asphalt for prolonged service life; and can also be used to improve hydraulics.
HEL-COR Pipe Properties - Diameter range 12” - 144”
- Wall thicknesses of 18, 16, 14, 12, 10 and 8 gage
- Available with helical or annular corrugations
- 1-1/2” x 1/4” and 2-2/3” x 1/2” corrugations for economical and efficient metal use in small diameters
- 3” x 1” and 5” x 1” offer high sectional properties in large diameter pipe
- Standards lengths are 20’- 40’
HEL-COR Pipe Shapes - Full Round - recommended for most applications
- Pipe -Arch - low, wide pipe-arch design distributes the area horizontally to provide adequate capacity without raising the grade
HEL-COR Pipe Accessories - End Sections
- Joint & Banding Systems
- Fittings
- MOBILE PIPE®
HEL-COR Pipe Applications - Drainage culverts, canals, and ditch enclosures
- Storm sewers and drainage pipe
- Stormwater detention and infiltration
- Rehabilitating sanitary sewers, storm sewers, and small culverts
- Wind turbine foundations and vertical shafts
See More
See Less