A2™ PVC Liner Pipe

Proven trenchless installation to slip line existing sewer lines without the disruptions associated with open trenching.

A2™ Liner Pipe, manufactured exclusively from low fill, cell class 12454 PVC compound, the most widely accepted sewer pipe material, withstands corrosive attack from both acidic and alkaline soils and is unaffected by chemicals found in normal sewage.

Relining with A2 Liner Pipe provides up to 50% cost savings over cured-in-place pipe. A2 Liner Pipe eliminates costly bypass operations because normal flow is maintained. It also gives you a new pipe with direct-bury strength of 46 psi stiffness, which means it doesn’t depend on the host pipe for long-term structural performance as cured-in-place liners do.

With a Manning’s “n” of .009, A2 Liner Pipe restores hydraulic capacity of reinforced concrete and vitrified clay pipes with offset joints, cracks, spalling, or protrusions. Its glossy-smooth interior allows the relined pipe to carry as much or more flow than the existing host pipe, even with diameter reductions.

Construction crews can slip line with A2 Liner Pipe at a rate in excess of 200 feet per hour. And because it is lightweight, you can use smaller, less expensive equipment for handling and joining.

A2 Liner Pipe’s patented gasketed STAB-JOINT® is designed to remain watertight up to 5 degrees angularity and ensures a positive connection even when slip lining misaligned, obstructed, or curvilinear sewers.

FEATURES

Manufactured from low fill, cell class 12454 PVC compound

Direct-bury strength of 46 psi stiffness

Manning’s “n” of .009

Patented, gasketed STAB-JOINT

Lightweight

BENEFITS

Superior corrosion and abrasion resistance

Doesn’t depend on the host pipe for long-term structural performance

Allows the relined pipe to carry as much or more flow than the existing host pipe, even with diameter reductions

Meets joint tightness requirements of ASTM D3212 and is designed to remain watertight up to 5 degrees angularity

Workers can slip line at a rate in excess of 200 feet per hour

• Available in 12”, 15", 18", 21", 24", 30", and 36” diameters
• Standard lengths are 10’ and 20’
• 2.5’ feet lengths are available for insertion via manholes

• Patented gasketed STAB-JOINT® meets the joint tightness test requirements of ASTM D3212 and is designed to remain watertight up to 5 degrees angularity
• Ensures a positive connection even when slip lining misaligned, obstructed, or curvilinear sewers
• Incorporates a PVC coupling that maintains a constant outside and inside diameter

• Rehabilitating storm sewers, sanitary sewers, and small culverts

See More

See Less