Acudor Products, Inc. -FA-H20 Aluminum Floor Door For H20 Loading

DOWNLOADS

The Acudor FA-H20 is an aluminum floor door for H20 loading. The FA-H20 is designed for interior and exterior applications where watertightness IS NOT required


Category: aluminum floor doors | exterior floor doors | floor doors...

MasterFormat: Specialty Doors and Frames



Acudor Products, Inc.
9 Woodland Road
Unit A
Roseland, NJ 07068
Tel: (800) 722-0501

info@acudor.com

https://acudor.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


FA-H20 Aluminum Floor Door For H20 Loading

The Acudor FA-H20 is an aluminum floor door for H20 loading. The FA-H20 is designed for interior and exterior applications where watertightness IS NOT required

Material:

Aluminum door and frame; stainless steel hinges and hardware

Door:

1/4" aluminum diamond plate reinforced to meet AASHTO specification H 20-44 for traffic loading (16000 lb. wheel load over 10” x 20” area with 30% added for impact)

Frame:

Angle frame fabricated from aluminum extrusion with an integral 1" anchor flange

Hinge:

Stainless steel butt hinges with tamperproof stainless steel bolts and nuts

Opening Device:

Automatic hold open arm with red vinyl grip allows door panel to open to 90 degrees, locking door in open position, and allowing for easy control when closing door panel. Stainless steel compression springs provide lift assistance. Available with electrical actuators, operated by wall mounted push button switch, and remote control

Standard Latch:

Flush aluminum drop handle, stainless steel slamlock with a fixed inside handle, removable outside handle, and removable threaded plug

Optional Latches / Locks:

Recessed padlock provision: st/stl slamlock

Finish:

Mill finish, with bituminous coating on exterior of frame

Product Highlights

Angle frame construcDesigned for off-street locations that may occasionally receive AASHTO H-20-44 wheel loads

Diamond plate door panel is equipped with a flush aluminum drop handle and an automatic hold open arm

Angle frame construction with integral anchor flange is designed to be cast into concrete

Designed for interior and exterior applications where watertightness IS NOT required


See More


Specifications

Specifications
STANDARD SIZES

Other sizes available upon request

Nominal Door Size W&HNominal Door Size W&HWeight per DoorWeight per Door
Inchesmmlbs.kg.
24 x 24610 x 6106429
24 x 30610 x 7627434
24 x 36610 x 9148036
30 x 30762 x 7628840
30 x 36762 x 91413159
36 x 36914 x 91411150
36 x 48914 x 121915872
42 x 421067 x 106718082
48 x 48*1219 x 121921899
48 x 72*1219 x 1829330150
60 x 60*1524 x 1524343156

*Double Leaf