V-SEAL Concrete Sealers -Industra-Coat 3520 Water Based Low Gloss Urethane Topcoat

DOWNLOADS

Coverage:

320-500 square feet per gallon when applied at 3-5 mils wet thickness


Category: abrasion resistant coatings | acid resistant coatings | industrial coatings...

MasterFormat: Cast-In-Place Concrete | Concrete Finishing | Dampproofing and Waterproofing...



V-SEAL Concrete Sealers
9042 Cotter Street
Lewis Center, OH 43035
Tel: (877) 738-7325

info@vseal.com

https://www.vseal.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Industra-Coat 3520 Water Based Low Gloss Urethane Topcoat

Coverage:

320-500 square feet per gallon when applied at 3-5 mils wet thickness

Recommended Uses

Recommended for concrete floors and counter tops, auto service centers, warehouses, computer rooms, laboratories, aircraft hangers, cafeterias and chemical exposure areas.

Overview

INDUSTRA-COAT #3520 is a two component low-gloss aliphatic polyurethane water based floor sealer that exhibits excellent characteristics for abrasion resistance, chemical resistance, flexibility, weathering, and UV stability.

CURE SCHEDULE (70°F):

pot life (150 gram mass): Minimum 1 hour
tack free (dry to touch): 7-9 hours
recoat or topcoat: 8-12 hours
light foot traffic: 24 hours
full cure (heavy traffic): 3-5 days

APPLICATION TEMPERATURE: 60-90 degrees F with relative humidity between 50% and 90%.

MIX RATIO: 2 parts A to 1 part B by volume

SHELF LIFE: 90 days in unopened containers

FINISH CHARACTERISTICS: low-gloss (<20 at 60 degrees @ glossmeter)

IMPACT RESISTANCE: Gardner Impact, direct & reverse=160 in lb (passed)

ABRASION RESISTANCE: Taber abrasor CS-17 calibrase wheel with 1000 gram total load and 500 cycles= 23.0 mg loss

ADHESION: >300 psi @ elcometer (concrete failure, no delamination) over suitable primer

VISCOSITY: Mixed= 450-650 cps (typical)

FLEXIBILITY: No cracks on a 1/8" mandrel


See More


Specifications

Size :1.5 Gal Kit,3 Gal Kit,15 Gal Kit
Sweetsstakes