Prihoda North America -Textile Air Dispersion Products


Prihoda products are generally ducting as well as air distribution devices (or return devices) all at the same time.

Category: air diffusers | air terminals | ceiling diffusers...

MasterFormat: HVAC Air Distribution | Air Duct Accessories | Air Outlets and Inlets...

Prihoda North America
4420 Dawes Lane E
Mobile, AL 36619
Tel: (855) 774-4632

Find a rep/distributor

Request More Info


Related Products


Textile Air Dispersion Products

Prihoda products are generally ducting as well as air distribution devices (or return devices) all at the same time. We offer positive pressure air dispersion systems (fabric ducting & diffusers) as well as negative pressure ducting for exhaust or returning air to the unit from the space served.

Why Use Fabric Ducts?

Cleanliness without compromise

This is the only duct system that can be perfectly (!) cleaned.By machine-washing, with the option to add disinfectant.

Fastest to install

Only 20 % of the time needed for a sheet-metal line!

Customisable look

Available in any colour or with graphicsmakes this product more than a mere duct.

The air flow you need

There is practically no form of air distribution that we cannot achieve.

Saving on your investment

Traditional diffusers are not needed on our ducts; our products already include custom-made distribution elements, insulation and noise dampers.

Low weight

Less than 5 % of the weight of sheet metal!

Long lifetime

No risk of material corroding or otherwise deteriorating.

Air dispersion / distribution options for fabric diffusers

Flow V brought into the diffuser through any of the ends or through the entry adapter may exit in the following manners:

A - through a permeable fabric
B - through microperforation - 0.2 - 0.4 mm holes in the fabric
C - through perforation - holes with a diameter greater than 5/32” (4mm)
D - through a small nozzle
E - through a large nozzle
F - through an adapter - air is guided off into another ducting branch (Fabric or metal)
G - through the second end - air leads to another diffuser or ducting (such as back to metal duct, etc.)

It always holds true that: V = A + B + C + D + E + F + G (certain values of A, B, C, D, E, F, G may be zero)

Air inlets for negative pressure ducting

Perforations are currently the only air inlet option used for negative pressure ducting.

Transporting air with fabric ducting

Ducting made from impermeable fabric or insulated ducting feeds air to the point where it needs to be distributed. We can manufacture nearly any fitting required such as a ”T”, reducer, radius elbow and many other custom fittings.

Air is distributed from fabric diffusers through various sizes, patterns, and types of openings. The combination of size, spacing, and grouping of holes together with various outlet flow models provide an infinite number of combinations and solutions for air distribution requirements for today’s project challenges.


Tiny laser cut holes with a diameter of 0.2 - 0.4 mm, intended for low velocity / laminar air dispersion (Very low throw, not recommended for heating unless directional microperforation is used).


A series of 5/32 inch (4mm) or larger holes, provide directed air supply (low to medium throw for heating, cooling, and ventilating).


3/4” diameter and up, very long throws or when a high velocity or spot cooling/heating is required.

* When calculating the throw/velocity at different distances from the duct, the temperature difference between the delivered air and the room (Delta T) must be considered along with the air speed from the outlets.

Fabric diffusers are an extremely versatile air distribution device which cover the entire spectrum of applied flow models used today. We achieve the desired throw by selecting the correct air diffuser outlet method, or quite often, a combination of methods.

Airflow Models

Note: Throws will vary and depend on static pressure in the diffuser, temperature of air delivered vs room temperature, environment, heat sources, obstacles, etc.

We tailor make all of our products to meet the needs of each individual project. Due to every project’s specific needs and the numerous combinations of flow models we decided years ago to develop design software to better assist our customers and to insure a proper solution is achieved on every order we deliver.

Our software provides throw velocities at various distances from the diffuser (isothermal or corrected for heating / cooling), pressure loss calculations, and sound generated. Generally the design parameters are static pressure available to the diffuser, volume of air, flow model, fabric type, installation height, throw needed (space dimensions), temperature difference, sound sensitive or not, and mounting method.

See More