PHC Corporation of North America -12.0 cu.ft. Vaccine Storage Fridge MPR-S313-PA


Fans in the MPR-S313-PA ensure gentle air circulation to provide uniform top to bottom temperature control after frequent door openings. The digital display shows temperature reading in the gradients of 1°C.

Category: appliances | lab refrigerators | pharmaceutical refrigerators...

MasterFormat: Laboratory Equipment | Laboratory Refrigerators

PHC Corporation of North America
1300 Michael Drive
Suite A
Wood Dale, IL 60191
Tel: (800) 858-8442
Fax: (630) 238-0074

Find a rep/distributor

Request More Info


Related Products


12.0 cu.ft. Vaccine Storage Fridge MPR-S313-PA

Model MPR-S313-PA Features

Superior Temperature Uniformity

Fans in the MPR-S313-PA ensure gentle air circulation to provide uniform top to bottom temperature control after frequent door openings. The digital display shows temperature reading in the gradients of 1°C. The configurable temperature for pharmaceutical refrigerators ranges from 2° to 14°C. A thermistor sensor monitors temperature inside the chamber. The circulation fan provides rapid temperature adjustment for a highly reliable, stable preservation environment unaffected by ambient temperature.

Remarkable Cooling Efficiency

A highly efficient hermetic compressor provides efficient cooling and maintains temperature level.

Ergonomic Design

The ergonomic design of the MPR series immunization refrigerator provides a clear view of stored items through the large glass panels. The slim profile also allows for quick retrieval of all products. Due to the space saving design, less installation space is required. Two dual paned sliding glass doors seal tightly to maintain uniformity.

Microprocessor Controls

Comprehensive setpoint, alarm, monitoring and diagnostic functions are based on the PHC built microprocessor controller with digital display of all input/output functions. The microprocessor and the electronic temperature controls ensure the set temperature is maintained.

Validated Storage of Vaccines

The PHCbi plenum for this vaccine storage fridge allows for uniform cold airflow distribution throughout the chamber to ensure temperature uniformity. This is essential for validated storage requirements.

Cycle Defrost System

Defrosting is performed automatically during compressor "off" cycles by sensing frost levels. This way defrosting is performed only when required, further protecting the contents against unnecessary temperature rise. The defrosting heater also acts as an emergency heat source to prevent samples from freezing in extremely low ambient temperature conditions (below 0°C).

Safety for Storage of Vaccines

Audible and flashing LED visual alarms alter you to the unlikely event of either a high or low temperature condition. If the inside temperature rises abnormally, an overshooting prevention circuit automatically switches off the fan motor or heater.


Vaccine Storage Refrigerator

The MPR-S313-PA pharmaceutical refrigerator for storage of vaccines offers a complete and integrated solution for the increased requirements of achieving strict storage temperatures for pharmaceuticals, medicines, vaccines and other temperature sensitive biological samples. The slim front-to-back design with four sliding doors fits seamlessly into your facility.

The MPR-S313-PA vaccine storage fridge provides an ergonomic design for easy access to products, effective temperature controls and a space saving design.

See More


EXTERNAL DIMENSIONS 31.5" W x 18.3" D x 70.9" H (800 x 465 x 1800 mm)
INTERNAL DIMENSIONS 28.3" W x 13.8" D x 56.5" H (720 x 350 x 1435 mm)
EFFECTIVE CAPACITY 12.0 cu.ft. (340 L)
INSULATION Rigid polyurethane foamed-in-place
SHELVES Hard steel wire on clear coating, 5 shelves (allowable load 44 lbs. (20 kg)/shelf; inner dimensions W x D: 27.6" x 9.4" (700 x 238 mm))
ACCESS PORT 1: Rear side (1.2" (30 mm) diameter)
COMPRESSOR Hermetic type (output: 250W)
EVAPORATOR Fin and tube type
ALARMS High temperature, low temperature, 0°C, door, power failure (with MPR-48B1)
NET WEIGHT 220 lbs (100 kg)
TEMPERATURE CONTROL SYSTEM Microprocessor Control System
AREA FOOTPRINT 6.98 sq. ft. (0.65 m2)
DATA MANAGEMENT Optional with LabAlert Monitoring System