Overly Door Co. -Model BWPC Metal Window - Bullet-Resistant

Model BWPC Metal Window - Bullet-Resistant

Category: drive through windows | drive thru windows | drive-through windows...

MasterFormat: Windows | Special Function Windows | Service and Teller Window Units...

Overly Door Co.
574 West Otterman Street
Greensburg, PA 15601
Tel: (800) 979-7300
Fax: (724) 830-2871



Find a rep/distributor

Request More Info


Related Products


Model BWPC Metal Window - Bullet-Resistant

Model Number: Model BWPC Metal Window

Armored Service Window with Single Pass Tray

Quick Specs

Glass Seal:
Conventional Neoprene Glazing

Bullet Resisting:
Assemblies are listed by Underwriters Laboratories,Inc. (UL) as being bullet resisting assemblies in compliance with Standard for Safety-UL 752, Bullet-Resisting Equipment for the following threat levels:

  • UL Level 1
  • UL Level 2
  • UL Level 3
  • UL Level 4
  • UL Level 5
  • UL Level 6
  • UL Level 7
  • UL Level 8

Desired threat level must be specified at time of placement of order.

Armored Service Windows with single pass tray provide transparent security for interior and exterior installations such as:

  • Guard Houses
  • Embassies
  • Control Rooms
  • Cashier Areas
  • Vital areas requiring the capability to transfer currency, documents, identification badges, or keys.

Voice communication is by means of armored, full height passages at both sides of transparent armor.

Opaque Armor:
Armored Service Window frames are formed from bullet-resisting steels suitably reinforced as required to meet UL test criteria. Frame corners are mitered and welded. Frames are telescopic and adjust to compensate for variation in finished wall thickness by clamping the wall opening. The finished wall thickness must be specified at time of order.

Deal Tray:
Armored Service Window units in 24" overall width and greater permit transfer of items not to exceed 16" in width x 1-5/8" in height thru the UL Listed deal tray. Deal tray is satin stainless steel finish throughout.

Optional Ledge Feature:
As an extra cost option BWPB units are available with an 8" stainless steel writing ledge on either or both sides of the deal tray sill, extending the full width of the sill. This option is an integral part of the sill and available only at the time of ordering.

Transparent Armor:
The unit can be supplied with UL Listed bullet-resisting glazing of appropriate thickness and type to meet the specified ballistic rating. If included, transparent armor is not glazed at the factory. It and the frame are shipped in separate cartons for each installation.The necessary gaskets and attachment screws are provided for seating transparent armor into the framing. Glazing is the responsibility of the installer.

Four standard frame finishes are available and must be specified at the time of order. These are:

  • Prime painted on both the interior and exterior sides of frame.
  • Satin stainless steel on both the interior and exterior sides of frame.
  • Satin stainless steel on exterior (public) side of frame, the interior (secure) frames is prime painted.
  • Satin stainless steel on the interior (secure) side of frame, the exterior (public) side is prime painted.
The opaque portion (frame) "wraps around" the finished wall thickness, concealing the prepared wall opening. Installation is accomplished by blocking the exterior frame section in place within the wall opening, inserting the interior clamping flange into the exterior frame section, transferring hole locations from the clamping flange, drilling, tapping and bolting the section and flange together with supplied fasteners thus clamping the wall.

See More