Metal-Era, LLC -Perma-Tite Gold Cantilever Coping


Perma-Tite Gold Cantilever Coping is the perfect solution for attachment to a parapet wall with a non-structural exterior building facade.

Category: edge trim | roof accessories | roofing accessories...

MasterFormat: Roof and Wall Specialties and Accessories | Manufactured Copings | Manufactured Gravel Stops and Fasciae...

Metal-Era, LLC
1600 Airport Road
Waukesha, WI 53188
Tel: (800) 558-2162
Fax: (800) 373-9156

Find a rep/distributor

Request More Info


Related Products


Perma-Tite Gold Cantilever Coping

Perma-Tite Gold Cantilever Coping is the perfect solution for attachment to a parapet wall with a non-structural exterior building facade. Conditions such as EIFS, brick or panels don’t allow for traditional anchoring to the exterior building structure, but Perma-Tite Gold Cantilever Coping’s unique support brackets bring extra stability to the roof edge system when attachment is required up to 6” away from the outside facade. It has a full snap-on design with 16-gauge, galvanized steel anchor clips and factory-applied stainless steel springs that ensure long-term positive attachment. Perma-Tite Gold Cantilever Coping is custom fabricated in sizes to meet specific job requirements.

Features / Benefits


The Lifetime, 215 mph is available on orders to meet a project's specification. It provides a maximum of Limited Lifetime, 215 mph coverage for the repair or replacement of any portion of the roof edge system that has failed due to a defect in Metal-Era supplied materials.


  • Tested per ANSI/SPRI/FM 4435/ES-1 Standard to comply with the International Building Code.
  • Factory Mutual approved for wind uplift protection.

Available Materials:

Its unique design allows for covers to be manufactured in 22 ga and 24 ga steel, .040", .050" and .063" aluminum.

Splice Plates:

Its 8" wide concealed splice plates (with non-curing isocryl butyle sealant strips) allow for thermal movement of materials and provides a watertight seal at all joints.

Competitively Priced:

The installed cost rivals even light gauge roof edge systems fabricated locally or in a roofer’s shop.

Efficient Design:

A full, snap-on design in 12'-0" lengths with no crimping make for quick installation and low labor costs. Pre-punched fastening holes ensure proper attachment to the building substrate. Corrosion resistant, stainless steel springs are factory attached to the anchor clips and provide long-term, positive spring loading. No adhesives are required.


Choose among a wide range of standard colors and finishes that meet your job requirements. A 30 year Kynar 500® finish warranty is included on coil-coated standard colors. Custom post-coated Kynar 500® colors are available with an included 10 year Kynar 500® finish warranty or a 20 year Kynar 500® finish warranty is available upon request.

Anodized finishes are also available and come with a 5 year warranty (no warranty available for coil anodized finishing. Post-coat/Class 1 Batch Anodized is available with a 5 Year warranty with an option to increase to a 10 Year warranty for an upcharge).

Custom Capabilities:

Radius and specially fabricated products are available to meet the unique needs of each project.


Factory fabricated miters provide a cleaner, more aesthetically pleasing appearance. This eliminates the need for field fabrication, providing time and labor savings.

Also Included:

12" wide, 16 ga. spring clips are placed 3' o.c. to provide for more positive attachment ensuring extra stability for the system. All splice plates and fasteners are also included and will arrive to the job site with the product.

See More