DoorKing, Inc. -Power Inverter & Backup Systems - Access Control

DOWNLOADS

The Model 1000 Power Inverter provides backup power for a single-gated Access Control System when primary AC power fails. Maintain a fully operational Access Control System during power outages and brown-outs. Ideal for residential and commercial applications with a single-gate system.


Category: access control accessories | access control systems | electronic security...

MasterFormat: Access Control | Fences and Gates | Gate Operators



DoorKing, Inc.
120 S. Glasgow Avenue
Inglewood, CA 90301
Tel: (800) 826-7493
Fax: (310) 641-1586

info@doorking.com

https://www.doorking.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Power Inverter & Backup Systems - Access Control

NO POWER, NO PROBLEM

The Model 1000 Power Inverter provides backup power for a single-gated Access Control System when primary AC power fails. Maintain a fully operational Access Control System during power outages and brown-outs. Ideal for residential and commercial applications with a single-gate system.

Overview

DoorKing's Model 1000 Power Inverter and Backup system is designed to provide backup power for your vehicular gate operator and access control system when primary (AC) power fails. Unlike DC Gate Operators that can only back-up the gate operator itself with internal batteries to run the DC motor, the model 1000 converts DC battery power to AC power to keep all system components, even the ones that are powered by AC Accessory transformers, operable at all times. DC gate operators do not convert their battery power to AC rendering all AC components of your system inoperable.

Specs

Features:

  • Selectable power out and power start options.
  • Selectable continuous operation mode or quick open mode.
  • Pure sine-wave output.
  • Electronic control circuit monitors battery voltage while system is in inverter mode and commands gate operators to open when battery power reaches critical levels.

Specifications:

  • AC Output Voltage is 120 VAC, 60 Hz
  • Continuous Power Output is 1000 Watts
  • Pure Sine-Wave output can power two 1/2 HP gate operator systems or a single 1 HP system
  • DC Input voltage is 12 VDC
  • Operating temperature 23°F (-5°C) to 104°F (40°C)
  • Low voltage alarm 10.2 - 10.8 VDC
  • Uses two (2) Maintenance Free, Rechargeable, Non-spillable, Sealed Lead-Acid (SLA), 12-Volt, 35 AH.
  • IMPORTANT! Use only with gate operators that utilize PSC motors. Do not use with operators that utilize motors with seperate start and run windings.

Model 1000

Options:

Post Mount Kit P/N 1000-045

Battery Cable Set P/N 1000-044

12-Volt, 35 Ah SLA Battery P/N 1801-005


See More


Specifications

Models
Model 1000
Sweetsstakes