Search Results for Manufacturer-J.R.-Clancy,-Incorporated

Below you will find links to company and product information for manufacturers and suppliers in Sweets matching the term Manufacturer-J.R.-Clancy,-Incorporated ... more


34 Products
Results per page:

J.R. Clancy, Incorporated - Mule Blocks – 12 Series, 8" Blocks
J.R. Clancy, Incorporated - Mule Blocks – 12 Series, 8" Blocks
Description: Used to divert the cables around obstructions or change direction of travel. • ASTM Class 30 grey iron sheave. • Tapered roller bearings. • Seven gauge side plates...

J.R. Clancy, Incorporated - Sliding Tension Floor Blocks
J.R. Clancy, Incorporated - Sliding Tension Floor Blocks
Description: Used with manual fire curtains to provide proper tension in the hand line. 12" diameter ASTM Class 30 grey iron sheave with machined groove for 3/4" or 1"...

J.R. Clancy, Incorporated - Tension Floor Blocks
J.R. Clancy, Incorporated - Tension Floor Blocks
Description: Used as the return pulley for the hand line in J-Guide or T-bar manual counterweight sets. Minimum 40 lb. weight to properly tension the handline. Kick tab permits...

J.R. Clancy, Incorporated - A-Guide™ System
J.R. Clancy, Incorporated - A-Guide™ System
Description: Heavy Duty aluminum guide system for counterweight arbors. 2" x 3-1/2" x 3/16" guide. Significantly less time to install than steel T-bar. ...

J.R. Clancy, Incorporated - Wire Guide Floor Blocks
J.R. Clancy, Incorporated - Wire Guide Floor Blocks
Description: Used with wire guide locking rail. Due to their limited travel, wire guided sets can use this economical fixed floor block. 8" diameter Nylon or ASTM Class 30 grey iron...

J.R. Clancy, Incorporated - Gallery Mounted Locking Rail
J.R. Clancy, Incorporated - Gallery Mounted Locking Rail
Description: Locking rails support rope locks and the index cards used to identify sets. Rope locks and index cards are mounted on a 3"x 5"x 1/4" formed, pre-punched steel...

J.R. Clancy, Incorporated - J-Guide / T-Bar Arbors, Double Purchase
J.R. Clancy, Incorporated - J-Guide / T-Bar Arbors, Double Purchase
Description: Used in J-Guide / T-Bar guided systems to hold counterweight that balances the batten load.

J.R. Clancy, Incorporated - Lattice Track Arbors
J.R. Clancy, Incorporated - Lattice Track Arbors
Description: Used in single purchase lattice track guided systems to hold counterweight that balances the batten load. Arbor tops and bottoms are fabricated 1/2" steel plates with...

J.R. Clancy, Incorporated - J-Guide™ System
J.R. Clancy, Incorporated - J-Guide™ System
Description: Light weight aluminum guide system for counterweight arbors. 1-1/2" x 1-3/4" x 3/16" guide. Averages 40% less time to install than steel T-bar. ...

J.R. Clancy, Incorporated - Outrigger Bracket
J.R. Clancy, Incorporated - Outrigger Bracket
Description: Used to support outrigger battens in front of the T-Bar wall. Use 015-67R Pipe Batten with these brackets to form the outrigger. Outrigger battens are used to support...

J.R. Clancy, Incorporated - SureLock®
J.R. Clancy, Incorporated - SureLock®
Description: Will not open if the set is more than 50 lbs. out of balance, preventing rigging "runaways". Indicates if the set is balanced, batten heavy or arbor heavy. ...

J.R. Clancy, Incorporated - Wire Guide Arbors
J.R. Clancy, Incorporated - Wire Guide Arbors
Description: Used in wire guided systems to hold counterweight that balances the batten load. Arbor tops and bottoms are fabricated 1/2" steel plates with 3/8" holes for guide...

J.R. Clancy, Incorporated - Custom Blocks
J.R. Clancy, Incorporated - Custom Blocks
Description: We can design custom blocks to meet your specific requirements. Nylon, steel, or ASTM Class 30 grey iron sheaves are available. Blocks may contain one or more...

J.R. Clancy, Incorporated - Head Blocks, Underhung - 59 Series
J.R. Clancy, Incorporated - Head Blocks, Underhung - 59 Series
Description: Underhung style, normally supported by two structural I-beams. ASTM Class 30 grey iron or nylon sheave. Equal pitch diameter on rope and cable...

J.R. Clancy, Incorporated - Light Duty Blocks
J.R. Clancy, Incorporated - Light Duty Blocks
Description: For use in light duty applications such as supporting fire lines. 3" diameter steel sheaves with ball bearing. Formed steel base allows vertical or horizontal...

J.R. Clancy, Incorporated - Loft Block Pivot Bracket
J.R. Clancy, Incorporated - Loft Block Pivot Bracket
Description: Pivot Brackets are required for mounting on loft beams with more than 1-1/2° of slope. Use for beams 4" - 8-1/2" wide for single line 55 series blocks). ...

J.R. Clancy, Incorporated - Mule Blocks – 12 Series, 12" Blocks
J.R. Clancy, Incorporated - Mule Blocks – 12 Series, 12" Blocks
Description: Used to divert the cables around obstructions or change direction of travel. • ASTM Class 30 grey iron sheave. • Tapered roller bearings. • Seven gauge side plates...

J.R. Clancy, Incorporated - Mule Block Swivel & Stands
J.R. Clancy, Incorporated - Mule Block Swivel & Stands
Description: Swivels may be added to mule blocks to allow swivel and pivot to meet site conditions. Stands support mule blocks where other structural steel is not available Mule...

J.R. Clancy, Incorporated - Multi-Sheave Blocks
J.R. Clancy, Incorporated - Multi-Sheave Blocks
Description: Blocks may be mounted upright or underhung. Blocks with three or more sheaves are constructed with the base angle legs turned in to allow close mounting centers. Base angles...

J.R. Clancy, Incorporated - SureStop™ Head Block
J.R. Clancy, Incorporated - SureStop™ Head Block
Description: Manual rigging holds heavy loads over people’s heads, so no amount of safety precautions can be too much. That’s why J.R.

J.R. Clancy, Incorporated - Universal Loft Block 55 / 56 / 59 Series
J.R. Clancy, Incorporated - Universal Loft Block 55 / 56 / 59 Series
Description: May be mounted upright or underhung. May be supported by I-beams, grid wells, or Unistrut™. Nylon or ASTM Class 30 grey iron sheaves are available.

J.R. Clancy, Incorporated - Counterweights
J.R. Clancy, Incorporated - Counterweights
Description: Used in arbors to counterbalance the weight of the batten and scenery or lights. Weights are flame cut steel. Opposite corners have 45º notches to provide...

J.R. Clancy, Incorporated - Index Lights
J.R. Clancy, Incorporated - Index Lights
Description: Used to light the locking rail, fly and loading galleries, with minimal light bleeding. Black exterior with white interior for even light distribution. UL...

J.R. Clancy, Incorporated - J-Guide/T-Bar Single Purchase Arbors
J.R. Clancy, Incorporated - J-Guide/T-Bar Single Purchase Arbors
Description: Used in J-Guide / T-Bar guided systems to hold counterweight that balances the batten load. Arbor tops and bottoms are fabricated 1/4" steel weldments with a bolt and...

J.R. Clancy, Incorporated - J-Guide / T-Bar Locking Rail
J.R. Clancy, Incorporated - J-Guide / T-Bar Locking Rail
Description: Locking rails support rope locks and the index cards used to identify sets. Rope locks and index cards are mounted on a 3"x 5"x 1/4" formed, pre-punched steel...