Search Results for Manufacturer-Gyford-Standoff-Systems

Below you will find links to company and product information for manufacturers and suppliers in Sweets matching the term Manufacturer-Gyford-Standoff-Systems ... more


38 Products
Results per page:

Gyford Standoff Systems - EZ 1/4″ Rod Double Panel Gripper
Gyford Standoff Systems - EZ 1/4″ Rod Double Panel Gripper
Description: Our EZ 1/4″ Rod Double Panel Gripper is used to mount two pieces of material to our 1/4″ rod.

Gyford Standoff Systems - EZ 1/4″ Rod
Gyford Standoff Systems - EZ 1/4″ Rod
Description: EZ 1/4″ Rod is 1/4″ in diameter and comes in 8′ and 12′ lengths. Price includes up to four (4) cuts. More than four (4) cuts will incur additional fee(s).

Gyford Standoff Systems - EZ 1/4″ Rod Connector
Gyford Standoff Systems - EZ 1/4″ Rod Connector
Description: The EZ 1/4″ Rod Connector is an aluminum rod connector for 1/4″ rod, secured with a cone point set screw. Other hardware may be mounted with a 5/16-18 stud.

Gyford Standoff Systems - EZ 1/4″ Rod Bottom Mount
Gyford Standoff Systems - EZ 1/4″ Rod Bottom Mount
Description: The EZ 1/4″ Rod Bottom Mount applies tension to 1/4″ rod and secures it with a cup point set screw. Mount this component to other hardware with a 5/16-18 stud.

Gyford Standoff Systems - EZ 3/8″ Rod
Gyford Standoff Systems - EZ 3/8″ Rod
Description: EZ 3/8″ Rod is 3/8″ in diameter and comes in 8′ and 12′ lengths. Price includes up to four (4) cuts. More than four (4) cuts will incur additional fee(s).

Gyford Standoff Systems - EZ 1/4″ Rod Saddle Gripper
Gyford Standoff Systems - EZ 1/4″ Rod Saddle Gripper
Description: The EZ 1/4″ Rod Saddle Gripper mounts material to our 1/4″ rod. The rod is secured with a flat point set screw. Your material is secured by a nylon tip set screw.

Gyford Standoff Systems - EZ 1/4″ Rod Mount
Gyford Standoff Systems - EZ 1/4″ Rod Mount
Description: The EZ 1/4″ Rod Mount is a mount for our 1/4″ rod and attaches to other hardware with a 5/16-18 stud. Rod is secured in place with a cup point set screw.

Gyford Standoff Systems - EZ 1/4″ Rod Turnbuckle Bottom Mount
Gyford Standoff Systems - EZ 1/4″ Rod Turnbuckle Bottom Mount
Description: The EZ 1/4″ Rod Turnbuckle Bottom Mount is designed for 1/4″ rod, which is held in place with a cone point set screw. This assembly applies tension to rod and is designed to be the...

Gyford Standoff Systems - EZ 5/8″ Rod
Gyford Standoff Systems - EZ 5/8″ Rod
Description: EZ 5/8″ Rod is 5/8″ in diameter and comes in 8′ and 12′ lengths. Price includes up to four (4) cuts. More than four (4) cuts will incur additional fee(s).

Gyford Standoff Systems - EZ 1/4″ Rod Single Panel Gripper
Gyford Standoff Systems - EZ 1/4″ Rod Single Panel Gripper
Description: The EZ 1/4″ Rod Single Panel Gripper assembly is designed to mount material on 1/4″ rod vertically, horizontally or at an angle.

Gyford Standoff Systems - EZ 1/4″ Rod Terminator
Gyford Standoff Systems - EZ 1/4″ Rod Terminator
Description: The EZ 1/4″ Rod Terminator is the replacement terminator for our 1/4″ rod turnbuckles.

Gyford Standoff Systems - EZ 3/8″ Rod Bottom Turnbuckle Mount
Gyford Standoff Systems - EZ 3/8″ Rod Bottom Turnbuckle Mount
Description: The EZ 3/8″ Rod Bottom Turnbuckle Mount can be used as either a top or bottom mount for heavier 3/8″ rod systems. When creating lightweight projects, you can apply tension to the...

Gyford Standoff Systems - EZ 1/4″ Rod StandOff with Cap
Gyford Standoff Systems - EZ 1/4″ Rod StandOff with Cap
Description: The EZ 1/4″ Rod StandOff with Cap is designed to attach panels in front of 1/4″ rod. The rod connector uses a SO-CAP9 with a flat point set screw to secure panels and will require a...

Gyford Standoff Systems - EZ 1/4″ Rod Thru-Mount
Gyford Standoff Systems - EZ 1/4″ Rod Thru-Mount
Description: The EZ 1/4″ Rod Thru-mount secures to 1/4″ rod and fastens in place with a flat point set screw.

Gyford Standoff Systems - EZ Rod 1/4″ 90 Degree Wall Connector
Gyford Standoff Systems - EZ Rod 1/4″ 90 Degree Wall Connector
Description: EZ Rod 1/4″ 90 Degree Wall Connector Model: EZ Rod 1/4″ 90 Degree Wall Connector 90 degree mounts attach rods at a fixed 90 degree angle.

Gyford Standoff Systems - EZ 1/4″ Rod Vertical Gripper
Gyford Standoff Systems - EZ 1/4″ Rod Vertical Gripper
Description: The EZ 1/4″ Rod Vertical Gripper is design to suspend panels from 1/4″ rod. The clip uses set screw to secure material and will require a 3/8″ hole.

Gyford Standoff Systems - EZ 1/4″ Rod Transition Connector
Gyford Standoff Systems - EZ 1/4″ Rod Transition Connector
Description: The EZ 1/4″ Rod Transition Connector is for 1/4″ rod. The head of this piece is tapped in 5/16-18 to allow other parts to be attached with a threaded stud.

Gyford Standoff Systems - EZ Rod 1/4″ Angled Turnbuckle Wall Mount
Gyford Standoff Systems - EZ Rod 1/4″ Angled Turnbuckle Wall Mount
Description: The EZ Rod 1/4″ Angled Turnbuckle Wall Mount is a hinged turnbuckle for 1/4″ rod. The hinge can be locked at the desired angle. This part is designed to apply tension to rod and...

Gyford Standoff Systems - EZ 3/8″ Rod Double Panel Gripper
Gyford Standoff Systems - EZ 3/8″ Rod Double Panel Gripper
Description: Our EZ 3/8″ Rod Double Panel Gripper is used to mount two pieces of material to our 3/8″ rod.

Gyford Standoff Systems - EZ 3/8″ Rod Connector
Gyford Standoff Systems - EZ 3/8″ Rod Connector
Description: The EZ 3/8″ Rod Connector is an aluminum rod connector for 3/8″ rod, secured with a cone point set screw. Other hardware may be mounted with a 5/16-18 stud.

Gyford Standoff Systems - EZ Rod 1/4″ Angled Wall Mount
Gyford Standoff Systems - EZ Rod 1/4″ Angled Wall Mount
Description: The EZ Rod 1/4″ Angled Wall Mount is a hinged rod mount for 1/4″ EZ-Rod. The hinge of this part can be tightened to stay at your desired angle. This part is typically used as a top...

Gyford Standoff Systems - EZ 3/8″ Rod Heavy Vertical Gripper
Gyford Standoff Systems - EZ 3/8″ Rod Heavy Vertical Gripper
Description: Used for heavier applications, the EZ 3/8″ Rod Heavy Vertical Gripper suspends panels from 3/8″ rod. The clip uses a stud to hold material and will require a 3/8″ hole.

Gyford Standoff Systems - EZ Rod 1/4″ Top Mount
Gyford Standoff Systems - EZ Rod 1/4″ Top Mount
Description: The EZ-A29 surface mount secures 1/4″ rod with a cone point set screw. This part can be used as a top or bottom connection and comes with a 2-1/2″ diameter base plate.

Gyford Standoff Systems - EZ 3/8″ Rod Saddle Gripper
Gyford Standoff Systems - EZ 3/8″ Rod Saddle Gripper
Description: The EZ 3/8″ Rod Saddle Gripper mounts material to our 3/8″ rod. The rod is secured with a flat point set screw. Your material is secured by a nylon tip set screw

Gyford Standoff Systems - EZ 3/8″ Rod Mount
Gyford Standoff Systems - EZ 3/8″ Rod Mount
Description: The EZ 3/8″ Rod Mount mount holds 3/8″ rod with a cup point set screw and has a 5/16-18 tapped base.