Search Results for Manufacturer-GAMCO

Below you will find links to company and product information for manufacturers and suppliers in Sweets matching the term Manufacturer-GAMCO ... more


221 Products
Results per page:

GAMCO - 287 Fold Down Purse Shelf
GAMCO - 287 Fold Down Purse Shelf
Description: (Formerly 8). Easily installed on toilet partition or wall. Type 304 stainless steel, satin finish. Shelf holds 100 lbs (45.36 Kg) when properly installed. Shelf automatically returns to upright...

GAMCO - DR-510 Surface-Mounted ADA Compliant Hand Dryer (NEW)
GAMCO - DR-510 Surface-Mounted ADA Compliant Hand Dryer (NEW)
Description: This small, low profile, ADA compliant hand dryer is multi-voltage running on 110 up to 240 Volt AC electrical supply. Operation is automatically controlled on/off, by an infrared sensor. Unit...

GAMCO - HCS-1 Hat and Coat Strip
GAMCO - HCS-1 Hat and Coat Strip
Description: 24" (610mm), 3 holders. Units fabricated of 20-gauge (0.9mm) type 304 stainless steel with exposed surfaces having a satin-finish. Hooks fabricated of 12-gauge (2.7mm) type 304 stainless...

GAMCO - 100CH Chrome Plated Curtain Hook
GAMCO - 100CH Chrome Plated Curtain Hook
Description: 2-5/8" H, 1-11/32" W (72 x 34mm). Type-304 0.109" (2mm) diameter stainless steel or chrome-plated. Hooks snap open or come permanently open to allow placement on a 1" (25mm)...

GAMCO - TSC-5 Recessed Toilet Seat-Cover Dispenser, Toilet Tissue Dispenser and Napkin Disposal
GAMCO - TSC-5 Recessed Toilet Seat-Cover Dispenser, Toilet Tissue Dispenser and Napkin Disposal
Description: Type 304 satin-finish stainless steel. Dispenser doors have tumbler locks. Holds 500 toilet seat covers and two rolls of tissue up to 4 1/2" (114mm) dia.

GAMCO - A-Series Welded-Frame Mirrors
GAMCO - A-Series Welded-Frame Mirrors
Description: Frame - fabricated of 18-8 type 304 stainless steel with exposed surfaces having a #4 satin-finish. One piece roll formed angle frame. All welded construction. Corners are welded and ground...

GAMCO - CT-2 Counter-Mounted Waste Door
GAMCO - CT-2 Counter-Mounted Waste Door
Description: Fabricated of 22-gauge (0.8mm) type 304 stainless steel with exposed surfaces having a satin-finish. Waste door is self closing, and mounted on a full length spring loaded stainless steel...

GAMCO - CT-4 Countertop Paper Towel Dispenser
GAMCO - CT-4 Countertop Paper Towel Dispenser
Description: Satin-finish stainless steel. Flange has 90° return. Towels load into top of dispenser. Dispenses 300 C-fold or multifold towels. Unit 12 ¾" W, 6" front to back depth (325 x...

GAMCO - TW-1 Recessed Towel Dispenser and Waste Receptacle Combination, 12 gal. (45.4 L)
GAMCO - TW-1 Recessed Towel Dispenser and Waste Receptacle Combination, 12 gal. (45.4 L)
Description: Satin-finish stainless steel. Vandal-resistant 18-gauge door with tumbler lock. Dispenses 600 C-fold or 800 multifold towels. Removable waste receptacle secured to cabinet with tumbler lock....

GAMCO - ND-1 Surface-Mounted Sanitary Napkin Disposal
GAMCO - ND-1 Surface-Mounted Sanitary Napkin Disposal
Description: Satin-finish stainless steel. Cover is drawn, one-piece construction; secured to cabinet with full-length stainless steel piano-hinge. Capacity: 1.0-gal. (3.8-L). Unit is 7 1/2" W, 10"...

GAMCO - -10 Horizontal Tub Grab Bar
GAMCO - -10 Horizontal Tub Grab Bar
Description: 20" x 40" (508 x 1016mm). 125 Series - 1 1/4" (32mm) diameter stainless steel. 150 Series - 1 1/2" (38mm) diameter stainless steel. Tubing - fabricated of type 304 stainless...

GAMCO - TSC-1 Surface-Mounted Seat-Cover Dispenser
GAMCO - TSC-1 Surface-Mounted Seat-Cover Dispenser
Description: Satin-finish stainless steel. Dispenses single- or half-fold paper toilet seat covers from beveled opening. Dispenser fills from bottom through concealed opening. Capacity: 250 toilet seat...

GAMCO - 212 DBL Recessed Double Toilet Tissue Paper Holder
GAMCO - 212 DBL Recessed Double Toilet Tissue Paper Holder
Description: Polished stainless steel. Chrome roller. Mounting screws included. Capacity: Holds two standard core toilet tissue roll up to 5-1/4" (133mm) diameter. Unit 12 3/4" W, 6 3/8" H...

GAMCO - 211 Recessed Soap dish
GAMCO - 211 Recessed Soap dish
Description: Stainless steel recess shells are stamped from 22-gauge (0.8mm) corrosion-resistant Type 304 stainless steel. Permanent soap holder is of Type 304 polished stainless steel.

GAMCO - MSA-1 Maximum Security Rear-Mounted Recessed Toilet Paper Holder
GAMCO - MSA-1 Maximum Security Rear-Mounted Recessed Toilet Paper Holder
Description: Fabricated of type 304 14-gauge (1.9mm) stainless steel. All welded construction with exposed surfaces having a #4 satin-finish. 5" (127mm) diameter and 4-1/8" (105mm) deep to...

GAMCO - BCS-1 Horizontal Wall-Mounted Baby Changing Station Cream
GAMCO - BCS-1 Horizontal Wall-Mounted Baby Changing Station Cream
Description: FDA approved blow-molded high-density, cream-color polyethylene with Microban® antimicrobial additive. Reinforced full-length steel-on-steel hinge mechanism, with 11-gauge steel mounting...

GAMCO - G-16AP Surface-Mounted Vertical Tank-Type Soap Dispenser with All-Purpose Valve
GAMCO - G-16AP Surface-Mounted Vertical Tank-Type Soap Dispenser with All-Purpose Valve
Description: Fabricated of 22-gauge (.759mm) type 304 satin finished stainless steel. Body of dispenser is welded to back panel. View level indicator is clear plastic. Valve is black molded plastic push...

GAMCO - BP-1 Surface-Mounted Bed Pan Rack
GAMCO - BP-1 Surface-Mounted Bed Pan Rack
Description: Unit fabricated of 18-gauge (1.2mm) and 16-gauge (1.5mm) type 304 stainless steel with exposed surfaces having a satin-finish. All welded construction. Unit is secured to wall with six (6) #10...

GAMCO - 282 25 Surface-Mounted Napkin-Tampon Vendor without Frame (formerly NV-1FS)
GAMCO - 282 25 Surface-Mounted Napkin-Tampon Vendor without Frame (formerly NV-1FS)
Description: Satin-finish stainless steel. Vandal-resistant 18-gauge door has two tumbler locks. Dispenses 30 napkins and 27 tampons. Coin mechanisms available for-25¢ operation. Separate lock and key...

GAMCO - BCS-2 Horizontal Wall-Mounted Baby Changing Station Grey
GAMCO - BCS-2 Horizontal Wall-Mounted Baby Changing Station Grey
Description: FDA approved blow-molded high-density, grey-color polyethylene with Microban® antimicrobial additive. Reinforced full-length steel-on-steel hinge mechanism, with 11-gauge steel mounting...

GAMCO - G-29L Basin-Mounted Soap Dispenser, Liquid Valve
GAMCO - G-29L Basin-Mounted Soap Dispenser, Liquid Valve
Description: Basin-mounted soap dispenser has polyethylene soap containers with easy viewing of soap level. Units have stainless steel soap containers with 21-fl oz. (0.62-L) capacity. Unit requires a...

GAMCO - BP-2 Recessed Bed Pan Cabinet
GAMCO - BP-2 Recessed Bed Pan Cabinet
Description: Unit fabricated of type 304 stainless steel with exposed surfaces having a satin-finish. One piece seamless flange provided with 1/4" (6mm) return for rigidity. Heavy duty 18-gauge (1.2mm)...

GAMCO - 352 25 Recessed/Semi-Recessed Napkin-Tampon Vendor (formerly NV-1)
GAMCO - 352 25 Recessed/Semi-Recessed Napkin-Tampon Vendor (formerly NV-1)
Description: Satin-finish stainless steel. Vandal-resistant 18-gauge door has two tumbler locks. Dispenses 30 napkins and 27 tampons. Separate lock and key for coin box. Unit is 14" W, 28" H, 6...

GAMCO - MS-18 Stainless Steel Mirror Shelf
GAMCO - MS-18 Stainless Steel Mirror Shelf
Description: 18" L x 1-1/4" D (457 x 32mm). Shelf - fabricated of 18-gauge (1.2mm) type 304 stainless steel with exposed surfaces having a satin-finish. All corners are welded and ground smooth.

GAMCO - DR-5120 White Epoxy Painted Cover (NEW)
GAMCO - DR-5120 White Epoxy Painted Cover (NEW)
Description: Surface-mounted ADA (American Disabilities Act) compliant dryer, with white epoxy finish. Cover incorporates SteriTouch® antimicrobial coating to promote hygiene.