07 61 16 - Batten Seam Sheet Metal Roofing

Below you will find links to company and product information for manufacturers and suppliers listed in theBatten Seam Sheet Metal Roofing section of Sweets... more


16
5
Products
Results per page:

CENTRIA International - Versapanel 1 ¾” (44mm) - Vertical
CENTRIA International - Versapanel 1 ¾” (44mm) - Vertical
Description: Versapanel insulated metal wall panels reimagine versatility and flexibility by offering a metal panel solution for either walls or roofs. This highly energy-efficient wall system is defined by...

Manufacturer: CENTRIA International

Category: composite wall panels | insulated cladding panels | sandwich panels...

MasterFormat: Batten Seam Sheet Metal Roofing | Roof Panels | Insulated Metal Wall Panels...


CENTRIA - Versapanel - Vertical Profile
CENTRIA - Versapanel - Vertical Profile
Description: Versapanel insulated metal wall panels add versatility and flexibility by offering a metal panel solution for either walls or roofs. This highly energy-efficient wall system is defined by bold...

Manufacturer: CENTRIA

Category: cladding | concealed fastener panels | galvanized steel roofing...

MasterFormat: Batten Seam Sheet Metal Roofing | Composite Roof Panels | Metal Composite Material Wall Panels...


Petersen Aluminum Corporation - Snap-On Batten Panel
Petersen Aluminum Corporation - Snap-On Batten Panel
Description: Snap-On metal roofing panels are designed for use in roofing, mansard and fascia applications. The panels are designed to be installed over a waterproofed solid substrate and a minimum 3:12 roof...

Manufacturer: Petersen Aluminum Corporation

Category: batten seam roofing | fascias | galvanized steel roofing...

MasterFormat: Batten Seam Sheet Metal Roofing | Roofing and Siding Panels | Metal Roof Panels...


Merchant & Evans, Inc. - 114-R Batten Metal Roof and Wall Panel System
Merchant & Evans, Inc. - 114-R Batten Metal Roof and Wall Panel System
Description: Applications: Architectural roofing on slopes 3" or greater. Continuous lengths up to 45 ft. Vertical walls and conical tapers. Install on solid deck, plywood or rigid insulation over...

Manufacturer: Merchant & Evans, Inc.

Category: copper roofing | snap lock metal roofing panels | standing seam metal roofing...

MasterFormat: Batten Seam Sheet Metal Roofing | Roof Panels | Flashing and Sheet Metal...


Berridge Metal Roof and Wall Panels - Batten Seam Panel
Berridge Metal Roof and Wall Panels - Batten Seam Panel
Description: The Berridge Batten Seam Panel system is a two-part system utilizing the Deep Vee Panel and square snap-on battens for bold panel lines. This system may be installed over open framing or solid...