05 30 00 - Metal Decking

Below you will find links to company and product information for manufacturers and suppliers listed in theMetal Decking section of Sweets... more


15
7
Products
Results per page:

McNichols Co. - Decking & Flooring, Extruded Interlocking Flooring - Diamondback® - ADA, Aluminum (AL) - T712000112
McNichols Co. - Decking & Flooring, Extruded Interlocking Flooring - Diamondback® - ADA, Aluminum (AL) - T712000112
Description: McNICHOLS ® Decking & Flooring, Extruded Interlocking Flooring, DIAMONDBACK ® , ADA, Aluminum, Alloy Type 6061-T6 Extrusion, Mill Finish, Solid...

Manufacturer: McNichols Co.

Category: interlocking flooring | metal decks | safety flooring...

MasterFormat: Metal Decking | Aluminum Decking | Metal Floor Plates...


Eagle Mouldings - Aluminum Decking- 5-7/8″ x 1″ Decking
Eagle Mouldings - Aluminum Decking- 5-7/8″ x 1″ Decking
Description: Part#: EAM-393 Aluminum Decking- 5-7/8″ x 1″ Decking - Stocked in 24′ lengths in Mill Finish (MF)

Manufacturer: Eagle Mouldings

Category: arena seating | bleachers | decking...

MasterFormat: Metal Decking | Special Structures | Fabricated Engineered Structures...


Contech Engineered Solutions - Bridge Plank
Contech Engineered Solutions - Bridge Plank
Description: Bridge Plank Model: Bridge Plank Cost-Effective Installation for Deck Rehab/ New Construction. Contech Bridge Plank is used for re-decking bridges and for new construction, either to replace deteriorated wood or concrete decks on otherwise structurally sound bridges, or as a high-strength...

Manufacturer: Contech Engineered Solutions

Category: bridge decking | decking | metal decking...

MasterFormat: Metal Decking | Steel Decking


GAF - Drill-Tec™ Fasteners
GAF - Drill-Tec™ Fasteners
Description: Drill-Tec ™ Pressure Plates Made of Galvalume ® coated steel. The round design provides an even distribution of loads and eliminates sharp corners that can damage the insulation or membrane. Drill-Tec ™ Standard #12 Standard #12 Roofing Fastener is designed to secure insulation to steel (18 ga –...

Manufacturer: GAF

Category: TPO membrane roofing | nails | screws...

MasterFormat: Metal Decking | Elastomeric Membrane Roofing | Thermoplastic-Polyolefin Roofing...


Berridge Metal Roof and Wall Panels - S-Deck Panel - Exposed Fastener Panel System
Berridge Metal Roof and Wall Panels - S-Deck Panel - Exposed Fastener Panel System
Description: The Berridge S-Deck Panels are corrugated structural metal and can be installed horizontally or vertically with exposed fasteners. S-Deck may be curved making it ideal for use over covered...

Manufacturer: Berridge Metal Roof and Wall Panels

Category: cladding | corrugated roofing | curved panels...

MasterFormat: Metal Decking | Roof Panels | Metal Roof Panels...


Varco Pruden Buildings - Deck-Frame Roof
Varco Pruden Buildings - Deck-Frame Roof
Description: Deck-Frame Roof Model: Deck-Frame Roof Deck-Frame is the first metal building roofing solution specifically designed to incorporate a membrane roof with a pre-engineered metal building. It combines the efficiency, speed and economy of steel systems construction with the aesthetic performance of...

Manufacturer: Varco Pruden Buildings

Category: metal decking | metal decks | roof deck panels...

MasterFormat: Metal Decking | Membrane Roofing | Metal Building Systems...


Epic Metals - Archdeck Curved Roof Deck Ceiling Systems
Epic Metals - Archdeck Curved Roof Deck Ceiling Systems
Description: Archdeck Curved Roof Deck Ceiling Systems Model: Archdeck Curved Roof Deck Ceiling Systems A deep structural steel deck system that curves in the strong direction of the corrugation creates a dramatic and prominent focal point in modern architecture. Archdeck panels are available with a curving...

Manufacturer: Epic Metals

Category: ceiling panels | metal decking | metal decks...

MasterFormat: Metal Decking | Steel Decking | Protective Covers...