04 01 00 - Maintenance of Masonry

Below you will find links to company and product information for manufacturers and suppliers listed in theMaintenance of Masonry section of Sweets... more


187
10
Products
Results per page:

Sherwin-Williams Company - H&C Shield-Crete Solvent-Based Clear Top Coat
Sherwin-Williams Company - H&C Shield-Crete Solvent-Based Clear Top Coat
Description: H&C® SHIELD-CRETE® SOLVENT-BASED CLEAR TOPCOAT is a one component clear solvent acrylic sealer. The clear glaze will provide excellent protection for the Shield-Crete decorative...

Manufacturer: Sherwin-Williams Company

Category: exterior finishing | finish coatings | masonry coatings...

MasterFormat: Maintenance of Masonry | Maintenance of Concrete | Painting and Coating...


LATICRETE International, Inc. - 3701 Lite Mortar R
LATICRETE International, Inc. - 3701 Lite Mortar R
Description: 3701 Lite Mortar R has carefully selected polymers, portland cement and light weight aggregates. This produces a rapid curing and light weight mortar which can be used in a large amount of projects.

Manufacturer: LATICRETE International, Inc.

Category: bedding mortar | fast setting mortars | fast-set mortars...

MasterFormat: Maintenance of Masonry | Stone Maintenance | Stone Assemblies...


W.R. Meadows - AIR-SHIELD THRU-WALL FLASHING - Flexible Flashing
W.R. Meadows - AIR-SHIELD THRU-WALL FLASHING - Flexible Flashing
Description: AIR-SHIELD THRU-WALL FLASHING is a self-adhering, flexible membrane flashing. It is a roll-type product that is nominally 40 mils thick. This material is an air, vapor, and liquid moisture...

Cathedral Stone Products, Inc. - M120 Marble - Veining Mortar
Cathedral Stone Products, Inc. - M120 Marble - Veining Mortar
Description: M120 Marble - Veining Mortar Model: M120 Marble - Veining Mortar 1 Quart SKU # 1132 Availability: In stock Marble Repair Mortar This single-component, cementitious, mineral based mortar is designed for the restoration of marble. Jahn M120 is completely vapor permeable and contains no latex or...

Extrutech Plastics, Inc. - EPI-51550/1171013 Tapcon with Washer
Extrutech Plastics, Inc. - EPI-51550/1171013 Tapcon with Washer
Description: For installation of 1/2" Wall & Ceiling panels and trims to concrete in high moisture or acidic areas we recommend using tapcon or nylon drive-pin fasteners. with a low profile head...

Flowcrete - Cementitious Floor Grouts - Isocrete 1500P
Flowcrete - Cementitious Floor Grouts - Isocrete 1500P
Description: A polymer-modified, cementitious, single component surfacing compound designed for use on new or worn concrete substrates.

GE Silicone - Elemax* SS Flashing
GE Silicone - Elemax* SS Flashing
Description: Elemax* SS Flashing is used to prevent air and water from penetrating critical joints and cavities and to ensure complete protection for your building envelope. It bonds to window...

Convergent Concrete Technologies - Densifiers & Cures - Pentra-Shield
Convergent Concrete Technologies - Densifiers & Cures - Pentra-Shield
Description: Concrete Surface Hardening Densifier with Anti-Scale and Freeze-Thaw Protection Pentra-Shield® is an exterior concrete and masonry surface hardener and densifier that...

V-SEAL Concrete Sealers - Industra-Gloss SB
V-SEAL Concrete Sealers - Industra-Gloss SB
Description: INDUSTRA-GLOSS SB is a 25% solids high performance proprietary formulation of 100% pure acrylic polymer resin in a <700 VOC solvent base.

Manufacturer: V-SEAL Concrete Sealers

Category: concrete treatments | curing compounds | floor treatments...

MasterFormat: Maintenance of Masonry | Concrete Finishing | Concrete Curing...


AGT Products Inc. - DRICORE PRO® Concrete Repair - Concrete Repair Kits
AGT Products Inc. - DRICORE PRO® Concrete Repair - Concrete Repair Kits
Description: The DRICORE PRO™ Concrete Repair system is designed and engineered to seal, fill and structurally reinforce concrete. Carbon fiber is 10x stronger than steel and boasts superior benefits...