04 05 00 - Common Work Results for Masonry

Below you will find links to company and product information for manufacturers and suppliers listed in theCommon Work Results for Masonry section of Sweets... more


86
13
Products
Results per page:

Ruskin Manufacturing - BV100 Aluminum Brick Vent
Ruskin Manufacturing - BV100 Aluminum Brick Vent
Description: The BV100 Brick Vent has a 4" deep standard frame and a 1-1/2" deep flange frame. It features: Minimum 39% free area for desired venting. Continuous weepage at bottom...

Manufacturer: Ruskin Manufacturing

Category: aluminum vents | brick vents | louvers and vents...

MasterFormat: Common Work Results for Masonry | Masonry Accessories | Wall Vents...


LATICRETE International, Inc. - 4-XLT Large and Heavy Tile Mortar
LATICRETE International, Inc. - 4-XLT Large and Heavy Tile Mortar
Description: 4-XLT Large and Heavy Tile Mortar Model: 4-XLT Large and Heavy Tile Mortar 4-XLT is a multi-use, polymer fortified adhesive mortar. 4-XLT offers tremendous utility including non-sag wall installations, large heavy tile mortar build-up of up to 3/4" (19 mm) and thin-set applications. Product #:...

Manufacturer: LATICRETE International, Inc.

Category: bed mortar | bonding mortars | face bonding mortars...

MasterFormat: Common Work Results for Masonry | Masonry Mortaring | Surface Bonding Masonry Mortaring...


W.R. Meadows - AIR-SHIELD THRU-WALL FLASHING - Flexible Flashing
W.R. Meadows - AIR-SHIELD THRU-WALL FLASHING - Flexible Flashing
Description: AIR-SHIELD THRU-WALL FLASHING is a self-adhering, flexible membrane flashing. It is a roll-type product that is nominally 40 mils thick. This material is an air, vapor, and liquid moisture...

Reliable Architectural Louvers & Grilles - Brick and Block Vent:RBV7020-4 FF
Reliable Architectural Louvers & Grilles - Brick and Block Vent:RBV7020-4 FF
Description: Brick vent with RSM20 added to flange to 4” (102) depth Special design features afford maximum weather protection .125” (3) extruded aluminum; 6063-T5...

Key Resin Company - Key Slurry Patch Kit
Key Resin Company - Key Slurry Patch Kit
Description: KEY PATCH KITS are user-friendly pre-packaged kits consisting of resin, hardener and aggregates. Key Patch kits are available as a mortar (for 1/4 inch deep fill or greater) or as a Slurry (for...

Manufacturer: Key Resin Company

Category: concrete flooring | concrete installation | concrete restoration products...

MasterFormat: Common Work Results for Masonry | Maintenance of Concrete | Cast-In-Place Concrete...


Industrial Louvers, Inc. - Model BV Brick Vent
Industrial Louvers, Inc. - Model BV Brick Vent
Description: Brick vents allow maximum airflow for small units. Shallow blades are mounted with deep frames. Standard sizes fit most applications, but custom sizes are available. Overall depth is 4″...

Manufacturer: Industrial Louvers, Inc.

Category: louver vents | roof-top vents | ventilators...

MasterFormat: Common Work Results for Masonry | Roof and Wall Specialties and Accessories | Roof Accessories...


Solomon Colors, Inc. - Micro-Topping Grout Mix
Solomon Colors, Inc. - Micro-Topping Grout Mix
Description: Use Micro-Topping for a smooth “like new” concrete surface. Micro-Topping is a very thin, polymer-modified grout mix that forms a uniform surface over existing concrete. When faced...

Manufacturer: Solomon Colors, Inc.

Category: decorative concrete finishing | microtoppings | resurfacing...

MasterFormat: Common Work Results for Masonry | Cast-In-Place Concrete | Grouting...


Extrutech Plastics, Inc. - EPI-51550/1171013 Tapcon with Washer
Extrutech Plastics, Inc. - EPI-51550/1171013 Tapcon with Washer
Description: For installation of 1/2" Wall & Ceiling panels and trims to concrete in high moisture or acidic areas we recommend using tapcon or nylon drive-pin fasteners. with a low profile head...

Architectural Louvers - EX and FL Brick Vents
Architectural Louvers - EX and FL Brick Vents
Description: EX and FL brick vents are ideal for crawl space, between floor, or bath exhaust. Model FL has a mounting flange for easy installation. These sturdy vents make an attractive...

Manufacturer: Architectural Louvers

Category: air vents | brick vents | exterior vents...

MasterFormat: Common Work Results for Masonry | Masonry Cavity Drainage, Weepholes, and Vents | Wall Specialties...


FERO Corporation - FERO Fast™ Thermal Bracket - Thermally Broken Shelf Angle Support - Inverted
FERO Corporation - FERO Fast™ Thermal Bracket - Thermally Broken Shelf Angle Support - Inverted
Description: FERO FAST™ THERMAL BRACKET ADVANTAGE: For applications requiring a flush shelf support, FAST Thermal Inverted Brackets create a flush option at the foundation.

Manufacturer: FERO Corporation

Category: concrete | concrete accessories | masonry accessories...

MasterFormat: Common Work Results for Masonry | Concrete Forming and Accessories | Concrete Accessories...


Xypex Chemical Corporation - Megamix Series Repairing Mortar
Xypex Chemical Corporation - Megamix Series Repairing Mortar
Description: Megamix I & II is a repairing mortar specifically for the waterproofing and resurfacing of deteriorated concrete surfaces, whereas Megamix II + Bio-San is specifically formulated for...

Manufacturer: Xypex Chemical Corporation

Category: damp protection | damproofing | special coatings...

MasterFormat: Common Work Results for Masonry | Concrete Finishing | Cementitious and Reactive Waterproofing...


Sunvent Industries - Model FL - Extruded Aluminum Brick & Block Vents - Flanged
Sunvent Industries - Model FL - Extruded Aluminum Brick & Block Vents - Flanged
Description: Sunvent Flange ”FL” Extruded Vents make possible simplified installation in existing walls. Chopped-out hole need not be “finished". An attractive appearance is assured...

Manufacturer: Sunvent Industries

Category: appliance vents | brick vents | extruded vents...

MasterFormat: Common Work Results for Masonry | Masonry Cavity Drainage, Weepholes, and Vents | Wall Specialties...


Joto-Vent System USA, Inc. - Joto-Vent System
Joto-Vent System USA, Inc. - Joto-Vent System
Description: The Joto-Vent System consists of 2 or 3 parts depending on whether you have an adjoining garage. The Joto-Vent and the Joto-Vent Architectural-covering are always required and meet the minimum...