03 10 00 - Concrete Forming and Accessories

Below you will find links to company and product information for manufacturers and suppliers listed in the Concrete Forming and Accessories section of Sweets... more


54
10
Products
Results per page:

LATICRETE International, Inc. - L&M™ DEBOND® Concrete Form Treatment
LATICRETE International, Inc. - L&M™ DEBOND® Concrete Form Treatment
Description: L&M™ DEBOND® is a non-staining, VOC-compliant, 100% chemically active, concrete form release for application to all types of concrete forms.

Construction Specialties - ZB Parking Garage and Stadium Cover
Construction Specialties - ZB Parking Garage and Stadium Cover
Description: Revolutionary one-piece parking expansion joint system that installs without the need for messy elastomeric concrete. Available in 5 standard roll sizes; 20', 30', 65', 130', & 200'. Joint Sizes range from 1" to 4". Contact the factory for larger sizes or custom applications. Construction...

Manufacturer: Construction Specialties

MasterFormat: Concrete Forming and Accessories | Concrete Accessories | Joint Protection...


Right Pointe, LLC - RX-2000 Expansion Joint Filler
Right Pointe, LLC - RX-2000 Expansion Joint Filler
Description: RX-2000 EXPANSION JOINT FILLER is a pre-formed, 100% recycled reclaimed fibre board. Made of environmentally friendly compressible materials, RX-2000 has unsurpassed flexibility for use in the...

Manufacturer: Right Pointe, LLC

Category: expansion control joints | expansion joint fillers | expansion joints...

MasterFormat: Concrete Forming and Accessories | Concrete Accessories | Joint Protection...


FAMCO - Joist Pocket Liner 2-9
FAMCO - Joist Pocket Liner 2-9
Description: Joist Pocket Liner 2-9 Model: JPL2-9 The JPL 2-9 is used for 1-1/2” and 1-3/4” wide x 9-1/2" tall floor joists. Sold only in 30 units per box. Additional Information SKU JPL2-9 UniFormat B1010355

Manufacturer: FAMCO

Category: framing hangers | framing hardware | hangers...

MasterFormat: Concrete Forming and Accessories | Common Work Results for Masonry | Masonry Accessories...


Owens Corning - CavityComplete® Steel Stud Wall System
Owens Corning - CavityComplete® Steel Stud Wall System
Description: CavityComplete ® Steel Stud Wall System Wall System for Steel Studs with Masonry Veneer The CavityComplete ® Wall System for Steel Stud with Masonry Veneer has been engineered to bring...

MultiDrain Systems, Inc. - Alfa Channel® Polymer Concrete Trench Drain
MultiDrain Systems, Inc. - Alfa Channel® Polymer Concrete Trench Drain
Description: Alfa Channel® Polymer Concrete Trench Drain Model: Alfa Channel® Polymer Concrete Trench Drain Alfa Channel® is a modular, pre-cast, pre-engineered polymer concrete (PC) trench drain system that has an interior channel width of 4″. The system includes 30 sloped channel sections of 1m (3.27′) each...

Manufacturer: MultiDrain Systems, Inc.

Category: facility trench drains | trench boxes | trench form...

MasterFormat: Concrete Forming and Accessories | Plumbing Piping | Facility Trench Drains...


Schöck North America - Isokorb® Type CM Structural Thermal Break
Schöck North America - Isokorb® Type CM Structural Thermal Break
Description: Reduce heat loss at balcony penetrations up to 90 percent while preventing mold formation and increasing interior floor temperatures up to 27° F (15°C)

Plumberex Specialty Products, Inc. - Floor Sink Carrier™
Plumberex Specialty Products, Inc. - Floor Sink Carrier™
Description: THE FLOOR SINK CARRIER ™ BY PLUMBEREX acts as a caddy for floor sink installations. As such, it eliminates the hassle of taping metal rebars during groundwork to estimate where sink...

Manufacturer: Plumberex Specialty Products, Inc.

Category: concrete form work | floor sink formwork accessories | form work...

MasterFormat: Concrete Forming and Accessories | Concrete Forming | Concrete Accessories...


Extrutech Plastics, Inc - Extrutech FORM System
Extrutech Plastics, Inc - Extrutech FORM System
Description: Extrutech Plastics introduces a new “stay in place” concrete form for 6” poured walls The Extrutech FORM System which is now in production brings a bright new look to concrete form construction. The 24” wide by 6” thick panel is pre-cut to project specifications and snaps together with a...

Manufacturer: Extrutech Plastics, Inc

Category: concrete formwork | forms | leave in place forms...

MasterFormat: Concrete Forming and Accessories | Concrete Forming


Armatherm - Armatherm™ 500 Structural Thermal Break Material
Armatherm - Armatherm™ 500 Structural Thermal Break Material
Description: Armatherm™ 500 structural thermal break material is a high strength, thermoset polyurethane manufactured in several densities. Armatherm™ 500 is able to transfer a wide range of...

Manufacturer: Armatherm

Category: TIM | balcony isolators | foundaton thermal breaks...

MasterFormat: Concrete Forming and Accessories | Concrete Insulated Connections* | Thermal Protection...